The function rt2800_iq_calibrate is intended for Rt5592 only.
Don't call it for MT7620 which has it's own calibration functions.
Reported-by: Serge Vasilugin <vasilugin@xxxxxxxxx>
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
v2: test for RT5592 instead of !RT6352
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 2dc197b508ad32..f51bf27f9f7942 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4398,7 +4398,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
- rt2800_iq_calibrate(rt2x00dev, rf->channel);
+ if (rt2x00_rt(rt2x00dev, RT5592))
+ rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
if (rt2x00_rt(rt2x00dev, RT6352)) {
--
2.37.3
