Search Linux Wireless

[PATCH v2 05/16] rt2x00: add RF self TXDC calibration for MT7620

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tomislav Požega <pozega.tomislav@xxxxxxxxx>

Add TX self calibration based on mtk driver.

Signed-off-by: Tomislav Požega <pozega.tomislav@xxxxxxxxx>
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Acked-by: Stanislaw Gruszka <stf_xl@xxxxx>
---
v2: use ++i instead of i = i + 1 in loops

 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index cf5463cb7b642b..ed2c6105899b8d 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8428,6 +8428,53 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
 	rt2800_led_open_drain_enable(rt2x00dev);
 }
 
+static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfb5r1_org, rfb7r1_org, rfvalue;
+	u32 mac0518, mac051c, mac0528, mac052c;
+	u8 i;
+
+	mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
+	mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0);
+	mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
+	mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2);
+
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
+
+	rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC);
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306);
+	rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff);
+	rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
+	rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
+
+	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
+	for (i = 0; i < 100; ++i) {
+		usleep_range(50, 100);
+		rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
+		if ((rfvalue & 0x04) != 0x4)
+			break;
+	}
+	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org);
+
+	rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4);
+	for (i = 0; i < 100; ++i) {
+		usleep_range(50, 100);
+		rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
+		if ((rfvalue & 0x04) != 0x4)
+			break;
+	}
+	rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org);
+
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
+	rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518);
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c);
+	rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
+}
+
 static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
 				       bool set_bw, bool is_ht40)
 {
@@ -9035,6 +9082,7 @@ static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
 	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
 
+	rt2800_rf_self_txdc_cal(rt2x00dev);
 	rt2800_bw_filter_calibration(rt2x00dev, true);
 	rt2800_bw_filter_calibration(rt2x00dev, false);
 }
-- 
2.37.3




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux