On Monday 12 September 2022 17:16:24 CEST Lech Perczak wrote: > > Hello, > > We're trying to get a WFM200S022XNN3 module working on a custom i.MX6Q board using SDIO interface, using upstream kernel. Our patches concern primarily the device tree for the board - and upstream firmware from linux-firmware repository. > > During that, we stumbled upon a memory corruption issue, which appears when big traffic is passing through the device. Our adapter is running in AP mode. This can be reproduced with 100% rate using iperf3, by starting an AP interface on the device, and an iperf3 server. Then, the client station runs iperf3 with "iperf3 -c <hostname> -t 3600" command - so the AP is sending data for up to one hour, however - the kernel on our device crashes after around a few minutes of traffic, sometimes less than a minute. > > The behaviour is the same on kernel v5.19.7, v5.19.2, and even with v6.0-rc5. Tests on v6.0-rc5 have shown most detailed stacktrace so far: > Hello Lech, It seems that something somewhere (Ms Exchange, I am looking at you) has removed all the newlines of your mail :-/. Can you try to fix the problem? I think that sending mails using base64 encoding would solve the issue. [...] -- Jérôme Pouiller
