On Mon, Sep 12, 2022 at 02:27:32PM +0000, Alvin Šipraga wrote: > Hi both, > > On Mon, Sep 12, 2022 at 04:13:08PM +0200, Mark Kettenis wrote: > > > Date: Mon, 12 Sep 2022 15:01:06 +0100 > > > From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx> > > > > > > On Mon, Sep 12, 2022 at 01:04:58PM +0100, Russell King (Oracle) wrote: > > > > On Mon, Sep 12, 2022 at 11:59:17AM +0000, Alvin Šipraga wrote: > > > > > On Mon, Sep 12, 2022 at 10:52:41AM +0100, Russell King wrote: > > > > > > From: Hector Martin <marcan@xxxxxxxxx> > > > > > > > > > > > > This binding is currently used for SDIO devices, but these chips are > > > > > > also used as PCIe devices on DT platforms and may be represented in the > > > > > > DT. Re-use the existing binding and add chip compatibles used by Apple > > > > > > T2 and M1 platforms (the T2 ones are not known to be used in DT > > > > > > platforms, but we might as well document them). > > > > > > > > > > > > Then, add properties required for firmware selection and calibration on > > > > > > M1 machines. > > > > > > > > > > > > Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > > > > > > Signed-off-by: Hector Martin <marcan@xxxxxxxxx> > > > > > > Reviewed-by: Mark Kettenis <kettenis@xxxxxxxxxxx> > > > > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx> > > > > > > --- > > > > > > .../net/wireless/brcm,bcm4329-fmac.yaml | 39 +++++++++++++++++-- > > > > > > 1 file changed, 35 insertions(+), 4 deletions(-) > > > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml > > > > > > index 53b4153d9bfc..fec1cc9b9a08 100644 > > > > > > --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml > > > > > > +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml > > > > > > @@ -4,7 +4,7 @@ > > > > > > $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml > > > > > > $schema: http://devicetree.org/meta-schemas/core.yaml > > > > > > > > > > > > -title: Broadcom BCM4329 family fullmac wireless SDIO devices > > > > > > +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices > > > > > > > > > > > > maintainers: > > > > > > - Arend van Spriel <arend@xxxxxxxxxxxx> > > > > > > @@ -41,11 +41,17 @@ title: Broadcom BCM4329 family fullmac wireless SDIO devices > > > > > > - cypress,cyw4373-fmac > > > > > > - cypress,cyw43012-fmac > > > > > > - const: brcm,bcm4329-fmac > > > > > > - - const: brcm,bcm4329-fmac > > > > > > + - enum: > > > > > > + - brcm,bcm4329-fmac > > > > > > + - pci14e4,43dc # BCM4355 > > > > > > + - pci14e4,4464 # BCM4364 > > > > > > + - pci14e4,4488 # BCM4377 > > > > > > + - pci14e4,4425 # BCM4378 > > > > > > + - pci14e4,4433 # BCM4387 > > > > > > > > > > > > reg: > > > > > > - description: SDIO function number for the device, for most cases > > > > > > - this will be 1. > > > > > > + description: SDIO function number for the device (for most cases > > > > > > + this will be 1) or PCI device identifier. > > > > > > > > > > > > interrupts: > > > > > > maxItems: 1 > > > > > > @@ -85,6 +91,31 @@ title: Broadcom BCM4329 family fullmac wireless SDIO devices > > > > > > takes precedence. > > > > > > type: boolean > > > > > > > > > > > > + brcm,cal-blob: > > > > > > + $ref: /schemas/types.yaml#/definitions/uint8-array > > > > > > + description: A per-device calibration blob for the Wi-Fi radio. This > > > > > > + should be filled in by the bootloader from platform configuration > > > > > > + data, if necessary, and will be uploaded to the device if present. > > > > > > > > > > Is this a leftover from a previous revision of the patchset? Because as > > > > > far as I can tell, the CLM blob is (still) being loaded via firmware, > > > > > and no additional parsing has been added for this particular OF > > > > > property. Should it be dropped? > > > > > > > > It does appear to be unparsed, but I don't know whether it's needed for > > > > the binding or not. I'll wait for the Asahi folk to review your comment > > > > before possibly removing it. > > > > > > Okay, the answer is, it is still very much part of the binding, and > > > the m1n1 boot loader populates it. > > > > > > This series is a subset of a larger series (remember the previous 34 > > > or 35 patch series?), so there are things in the binding document > > > which are not included in this series. > > > > > > I don't think it makes sense to break up the binding document given > > > that it has already been reviewed several times in its current state, > > > should we really remove this one property and throw away all that > > > review effort. > > > > The OpenBSD driver already uses these properties. So even if the > > Linux driver doesn't use this yet, there is an existing implementation > > that does. That should be good enough for it to be included in the > > binding isn't it? > > Yes, I suspected that might be the case too. I think it's fine. > > Thanks Russel for the clarification btw. Feel free to add my > > Reviewed-by: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx> Thanks! -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
