Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/bmi.c | 4 ++-- drivers/net/wireless/ath/ath10k/ce.c | 2 +- drivers/net/wireless/ath/ath10k/core.c | 2 +- drivers/net/wireless/ath/ath10k/core.h | 4 ++-- drivers/net/wireless/ath/ath10k/coredump.c | 2 +- drivers/net/wireless/ath/ath10k/coredump.h | 2 +- drivers/net/wireless/ath/ath10k/debug.c | 2 +- drivers/net/wireless/ath/ath10k/debugfs_sta.c | 2 +- drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +- drivers/net/wireless/ath/ath10k/htt_tx.c | 2 +- drivers/net/wireless/ath/ath10k/hw.c | 6 +++--- drivers/net/wireless/ath/ath10k/mac.c | 8 ++++---- drivers/net/wireless/ath/ath10k/pci.c | 2 +- drivers/net/wireless/ath/ath10k/pci.h | 2 +- drivers/net/wireless/ath/ath10k/qmi.c | 2 +- drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +- drivers/net/wireless/ath/ath10k/sdio.c | 2 +- drivers/net/wireless/ath/ath10k/thermal.c | 2 +- drivers/net/wireless/ath/ath10k/thermal.h | 2 +- drivers/net/wireless/ath/ath10k/usb.h | 2 +- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 4 ++-- drivers/net/wireless/ath/ath10k/wmi.c | 2 +- drivers/net/wireless/ath/ath10k/wmi.h | 14 +++++++------- 23 files changed, 37 insertions(+), 37 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c index 4481ed375f55..af6546572df2 100644 --- a/drivers/net/wireless/ath/ath10k/bmi.c +++ b/drivers/net/wireless/ath/ath10k/bmi.c @@ -101,7 +101,7 @@ int ath10k_bmi_get_target_info_sdio(struct ath10k *ar, cmd.id = __cpu_to_le32(BMI_GET_TARGET_INFO); /* Step 1: Read 4 bytes of the target info and check if it is - * the special sentinal version word or the first word in the + * the special sentinel version word or the first word in the * version response. */ resplen = sizeof(u32); @@ -111,7 +111,7 @@ int ath10k_bmi_get_target_info_sdio(struct ath10k *ar, return ret; } - /* Some SDIO boards have a special sentinal byte before the real + /* Some SDIO boards have a special sentinel byte before the real * version response. */ if (__le32_to_cpu(tmp) == TARGET_VERSION_SENTINAL) { diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index c45c814fd122..59926227bd49 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -1323,7 +1323,7 @@ EXPORT_SYMBOL(ath10k_ce_per_engine_service); /* * Handler for per-engine interrupts on ALL active CEs. * This is used in cases where the system is sharing a - * single interrput for all CEs + * single interrupt for all CEs */ void ath10k_ce_per_engine_service_any(struct ath10k *ar) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index d1ac64026cb3..400f332a7ff0 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -3096,7 +3096,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, * enabled always. * * We can still enable BTCOEX if firmware has the support - * eventhough btceox_support value is + * even though btceox_support value is * ATH10K_DT_BTCOEX_NOT_FOUND */ diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index d70d7d088a2b..f5de8ce8fb45 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -76,7 +76,7 @@ /* The magic used by QCA spec */ #define ATH10K_SMBIOS_BDF_EXT_MAGIC "BDF_" -/* Default Airtime weight multipler (Tuned for multiclient performance) */ +/* Default Airtime weight multiplier (Tuned for multiclient performance) */ #define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4 #define ATH10K_MAX_RETRY_COUNT 30 @@ -857,7 +857,7 @@ enum ath10k_dev_flags { /* Disable HW crypto engine */ ATH10K_FLAG_HW_CRYPTO_DISABLED, - /* Bluetooth coexistance enabled */ + /* Bluetooth coexistence enabled */ ATH10K_FLAG_BTCOEX, /* Per Station statistics service */ diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c index fe6b6f97a916..2d1634a890dd 100644 --- a/drivers/net/wireless/ath/ath10k/coredump.c +++ b/drivers/net/wireless/ath/ath10k/coredump.c @@ -531,7 +531,7 @@ static const struct ath10k_mem_section qca6174_hw30_sdio_register_sections[] = { {0x40000, 0x400A4}, - /* SI register is skiped here. + /* SI register is skipped here. * Because it will cause bus hang * * {0x50000, 0x50018}, diff --git a/drivers/net/wireless/ath/ath10k/coredump.h b/drivers/net/wireless/ath/ath10k/coredump.h index 240d70515088..437b9759f05d 100644 --- a/drivers/net/wireless/ath/ath10k/coredump.h +++ b/drivers/net/wireless/ath/ath10k/coredump.h @@ -125,7 +125,7 @@ enum ath10k_mem_region_type { * To minimize the size of the array, the list must obey the format: * '{start0,stop0},{start1,stop1},{start2,stop2}....' The values below must * also obey to 'start0 < stop0 < start1 < stop1 < start2 < ...', otherwise - * we may encouter error in the dump processing. + * we may encounter error in the dump processing. */ struct ath10k_mem_section { u32 start; diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 39378e3f9b2b..c861e66ef6bc 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -1081,7 +1081,7 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file, * struct available.. */ -/* This generally cooresponds to the debugfs fw_stats file */ +/* This generally corresponds to the debugfs fw_stats file */ static const char ath10k_gstrings_stats[][ETH_GSTRING_LEN] = { "tx_pkts_nic", "tx_bytes_nic", diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c index 367539f2c370..87a3365330ff 100644 --- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c +++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c @@ -498,7 +498,7 @@ static char *get_num_ampdu_subfrm_str(enum ath10k_ampdu_subfrm_num i) { switch (i) { case ATH10K_AMPDU_SUBFRM_NUM_10: - return "upto 10"; + return "up to 10"; case ATH10K_AMPDU_SUBFRM_NUM_20: return "11-20"; case ATH10K_AMPDU_SUBFRM_NUM_30: diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 8a075a711b71..be02ab27a49b 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2496,7 +2496,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt, /* I have not yet seen any case where num_mpdu_ranges > 1. * qcacld does not seem handle that case either, so we introduce the - * same limitiation here as well. + * same limitation here as well. */ if (num_mpdu_ranges > 1) ath10k_warn(ar, diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index a19b0795c86d..bd603feb7953 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -1112,7 +1112,7 @@ int ath10k_htt_tx_fetch_resp(struct ath10k *ar, int len = 0; int ret; - /* Response IDs are echo-ed back only for host driver convienence + /* Response IDs are echo-ed back only for host driver convenience * purposes. They aren't used for anything in the driver yet so use 0. */ diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index e52e41a70321..6d32b43a4da6 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -84,7 +84,7 @@ const struct ath10k_hw_regs qca99x0_regs = { .ce5_base_address = 0x0004b400, .ce6_base_address = 0x0004b800, .ce7_base_address = 0x0004bc00, - /* Note: qca99x0 supports upto 12 Copy Engines. Other than address of + /* Note: qca99x0 supports up to 12 Copy Engines. Other than address of * CE0 and CE1 no other copy engine is directly referred in the code. * It is not really necessary to assign address for newly supported * CEs in this address table. @@ -120,7 +120,7 @@ const struct ath10k_hw_regs qca4019_regs = { .ce5_base_address = 0x0004b400, .ce6_base_address = 0x0004b800, .ce7_base_address = 0x0004bc00, - /* qca4019 supports upto 12 copy engines. Since base address + /* qca4019 supports up to 12 copy engines. Since base address * of ce8 to ce11 are not directly referred in the code, * no need have them in separate members in this table. * Copy Engine Address @@ -924,7 +924,7 @@ static void ath10k_hw_map_target_mem(struct ath10k *ar, u32 msb) ath10k_hif_write32(ar, address, msb); } -/* 1. Write to memory region of target, such as IRAM adn DRAM. +/* 1. Write to memory region of target, such as IRAM and DRAM. * 2. Target address( 0 ~ 00100000 & 0x00400000~0x00500000) * can be written directly. See ath10k_pci_targ_cpu_to_ce_addr() too. * 3. In order to access the region other than the above, diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index e086db920a82..ec8d5b29bc72 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4051,7 +4051,7 @@ static int ath10k_mac_tx(struct ath10k *ar, ath10k_tx_h_seq_no(vif, skb); break; case ATH10K_HW_TXRX_ETHERNET: - /* Convert 802.11->802.3 header only if the frame was erlier + /* Convert 802.11->802.3 header only if the frame was earlier * encapsulated to 802.11 by mac80211. Otherwise pass it as is. */ if (!(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)) @@ -8097,7 +8097,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* TODO: Implement this function properly * For now it is needed to reply to Probe Requests in IBSS mode. - * Propably we need this information from FW. + * Probably we need this information from FW. */ static int ath10k_tx_last_beacon(struct ieee80211_hw *hw) { @@ -9686,7 +9686,7 @@ static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = { }, }; -/* FIXME: This is not thouroughly tested. These combinations may over- or +/* FIXME: This is not thoroughly tested. These combinations may over- or * underestimate hw/fw capabilities. */ static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = { @@ -9926,7 +9926,7 @@ int ath10k_mac_register(struct ath10k *ar) WLAN_CIPHER_SUITE_BIP_GMAC_128, WLAN_CIPHER_SUITE_BIP_GMAC_256, - /* Only QCA99x0 and QCA4019 varients support GCMP-128, GCMP-256 + /* Only QCA99x0 and QCA4019 variants support GCMP-128, GCMP-256 * and CCMP-256 in hardware. */ WLAN_CIPHER_SUITE_GCMP, diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index bf1c938be7d0..3691fcc0ab34 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1244,7 +1244,7 @@ static void ath10k_pci_process_htt_rx_cb(struct ath10k_ce_pipe *ce_state, unsigned int nbytes, max_nbytes, nentries; int orig_len; - /* No need to aquire ce_lock for CE5, since this is the only place CE5 + /* No need to acquire ce_lock for CE5, since this is the only place CE5 * is processed other than init and deinit. Before releasing CE5 * buffers, interrupts are disabled. Thus CE5 access is serialized. */ diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index cf64898b9447..480cd97ab739 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -81,7 +81,7 @@ struct ath10k_pci_pipe { /* Handle of underlying Copy Engine */ struct ath10k_ce_pipe *ce_hdl; - /* Our pipe number; facilitiates use of pipe_info ptrs. */ + /* Our pipe number; facilitates use of pipe_info ptrs. */ u8 pipe_num; /* Convenience back pointer to hif_ce_state. */ diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index d7e406916bc8..66cb7a1e628a 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -792,7 +792,7 @@ static void ath10k_qmi_event_server_arrive(struct ath10k_qmi *qmi) return; /* - * HACK: sleep for a while inbetween receiving the msa info response + * HACK: sleep for a while between receiving the msa info response * and the XPU update to prevent SDM845 from crashing due to a security * violation, when running MPSS.AT.4.0.c2-01184-SDM845_GEN_PACK-1. */ diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h index 6ce2a8b1060d..777e53aa69dc 100644 --- a/drivers/net/wireless/ath/ath10k/rx_desc.h +++ b/drivers/net/wireless/ath/ath10k/rx_desc.h @@ -448,7 +448,7 @@ struct rx_mpdu_end { * - 4 bytes for WEP * - 8 bytes for TKIP, AES * [padding to 4 bytes] - * c) A-MSDU subframe header (14 bytes) if appliable + * c) A-MSDU subframe header (14 bytes) if applicable * d) LLC/SNAP (RFC1042, 8 bytes) * * In case of A-MSDU only first frame in sequence contains (a) and (b). diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index 24283c02a5ef..94291d442d7c 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -1057,7 +1057,7 @@ static int ath10k_sdio_mbox_proc_pending_irqs(struct ath10k *ar, out: /* An optimization to bypass reading the IRQ status registers - * unecessarily which can re-wake the target, if upper layers + * unnecessarily which can re-wake the target, if upper layers * determine that we are in a low-throughput mode, we can rely on * taking another interrupt rather than re-checking the status * registers which can re-wake the target. diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index 36c9a1364253..cefd97323dfe 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -98,7 +98,7 @@ static ssize_t ath10k_thermal_show_temp(struct device *dev, temperature = ar->thermal.temperature; spin_unlock_bh(&ar->data_lock); - /* display in millidegree celcius */ + /* display in millidegree celsius */ ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000); out: mutex_unlock(&ar->conf_mutex); diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h index 5fdb020f4da3..1f4de9fbf2b3 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.h +++ b/drivers/net/wireless/ath/ath10k/thermal.h @@ -19,7 +19,7 @@ struct ath10k_thermal { /* protected by conf_mutex */ u32 throttle_state; u32 quiet_period; - /* temperature value in Celcius degree + /* temperature value in Celsius degree * protected by data_lock */ int temperature; diff --git a/drivers/net/wireless/ath/ath10k/usb.h b/drivers/net/wireless/ath/ath10k/usb.h index 34d683e8fc18..48e066ba8162 100644 --- a/drivers/net/wireless/ath/ath10k/usb.h +++ b/drivers/net/wireless/ath/ath10k/usb.h @@ -26,7 +26,7 @@ #define ATH10K_USB_EP_ADDR_APP_DATA_MP_OUT 0x03 #define ATH10K_USB_EP_ADDR_APP_DATA_HP_OUT 0x04 -/* diagnostic command defnitions */ +/* diagnostic command definitions */ #define ATH10K_USB_CONTROL_REQ_SEND_BMI_CMD 1 #define ATH10K_USB_CONTROL_REQ_RECV_BMI_RESP 2 #define ATH10K_USB_CONTROL_REQ_DIAG_CMD 3 diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index b39c9b78b32b..dbb48d70f2e9 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -1813,7 +1813,7 @@ struct wmi_tlv_pdev_get_temp_cmd { struct wmi_tlv_pdev_temperature_event { __le32 tlv_hdr; - /* temperature value in Celcius degree */ + /* temperature value in Celsius degree */ __le32 temperature; __le32 pdev_id; } __packed; @@ -2548,7 +2548,7 @@ struct nlo_channel_prediction_cfg { /* Preconfigured stationary threshold. * Lesser value means more conservative. Bigger value means more aggressive. - * Maximum is 100 and mininum is 0. + * Maximum is 100 and minimum is 0. */ __le32 stationary_threshold; diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 074d8ba5072a..980d4124fa28 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3555,7 +3555,7 @@ static void ath10k_wmi_update_tim(struct ath10k *ar, __le32 t; u32 v, tim_len; - /* When FW reports 0 in tim_len, ensure atleast first byte + /* When FW reports 0 in tim_len, ensure at least first byte * in tim_bitmap is considered for pvm calculation. */ tim_len = tim_info->tim_len ? __le32_to_cpu(tim_info->tim_len) : 1; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 4abd12e78028..6de3cc4640a0 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -3170,7 +3170,7 @@ struct wmi_start_scan_common { /* dwell time in msec on passive channels */ __le32 dwell_time_passive; /* - * min time in msec on the BSS channel,only valid if atleast one + * min time in msec on the BSS channel,only valid if at least one * VDEV is active */ __le32 min_rest_time; @@ -3196,7 +3196,7 @@ struct wmi_start_scan_common { * and bssid_list */ __le32 repeat_probe_time; - /* time in msec between 2 consequetive probe requests with in a set. */ + /* time in msec between 2 consecutive probe requests with in a set. */ __le32 probe_spacing_time; /* * data inactivity time in msec on bss channel that will be used by @@ -4397,7 +4397,7 @@ struct wmi_pdev_stats_tx { /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; - /* wal pdev continous xretry */ + /* wal pdev continuous xretry */ __le32 pdev_tx_timeout; /* wal pdev resets */ @@ -5240,7 +5240,7 @@ enum wmi_vdev_param { * scheduler. */ WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, - /* enable/dsiable WDS for this VDEV */ + /* enable/disable WDS for this VDEV */ WMI_VDEV_PARAM_WDS, /* ATIM Window */ WMI_VDEV_PARAM_ATIM_WINDOW, @@ -5372,7 +5372,7 @@ enum wmi_10x_vdev_param { * scheduler. */ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, - /* enable/dsiable WDS for this VDEV */ + /* enable/disable WDS for this VDEV */ WMI_10X_VDEV_PARAM_WDS, /* ATIM Window */ WMI_10X_VDEV_PARAM_ATIM_WINDOW, @@ -5904,7 +5904,7 @@ enum wmi_sta_ps_param_tx_wake_threshold { enum wmi_sta_ps_param_pspoll_count { WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, /* - * Values greater than 0 indicate the maximum numer of PS-Poll frames + * Values greater than 0 indicate the maximum number of PS-Poll frames * FW will send before waking up. */ @@ -6947,7 +6947,7 @@ struct wmi_echo_ev_arg { }; struct wmi_pdev_temperature_event { - /* temperature value in Celcius degree */ + /* temperature value in Celsius degree */ __le32 temperature; } __packed; -- 2.37.0