Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: e1547c535ede ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 422b396a1af6..b4e09da1c683 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -2959,12 +2959,12 @@ bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
}
if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
- /* path B RX OK */
+ /* path B TX OK */
for (i = 4; i < 6; i++)
result[3][i] = result[c1][i];
}
- if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+ if (!(simubitmap & 0xc0) && priv->tx_paths > 1) {
/* path B RX OK */
for (i = 6; i < 8; i++)
result[3][i] = result[c1][i];
--
2.37.2
