Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> wrote: > Add support to connect to a non-transmit MBSSID AP profile. > > Non-transmit MBSSID profile parameters are passed to the firmware > via WMI VDEV UP command and this helps firmware to track MBSSID > profile within the multi-BSS beacon and report beacon loss if > any. > > WCN6750, QCA6390 & WCN6855 firmwares have the support and hence > enable the support on these hardwares. > > Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 > > Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx> Failed to apply. Again please use --base. error: patch failed: drivers/net/wireless/ath/ath11k/core.c:111 error: drivers/net/wireless/ath/ath11k/core.c: patch does not apply error: patch failed: drivers/net/wireless/ath/ath11k/hw.h:205 error: drivers/net/wireless/ath/ath11k/hw.h: patch does not apply stg import: Diff does not apply cleanly Patch set to Changes Requested. -- https://patchwork.kernel.org/project/linux-wireless/patch/20220720134622.15293-1-quic_mpubbise@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
