Hi,
Am 2022-08-04 20:13, schrieb Ajay.Kathat@xxxxxxxxxxxxx:
From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an
object on the stack. Use dynamically allocated memory for cmd53 instead
of stack address which is not DMA'able.
Fixes: 5625f965d764 ("wilc1000: move wilc driver out of staging")
Reported-by: Michael Walle <mwalle@xxxxxxxxxx>
Suggested-by: Michael Walle <mwalle@xxxxxxxxxx>
Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
---
This patch is created based on [1] and changes are done as discussed in
the same thread.
[1].
https://patchwork.kernel.org/project/linux-wireless/patch/20220728152037.386543-1-michael@xxxxxxxx/
changes since v1:
- add 'use_global_buf' variable to know when to use bounce
buffer
- remove unnecessary goto label
- dynamically allocate 'vmm_table'
.../net/wireless/microchip/wilc1000/netdev.h | 1 +
.../net/wireless/microchip/wilc1000/sdio.c | 35 +++++++++++++++----
.../net/wireless/microchip/wilc1000/wlan.c | 15 ++++++--
3 files changed, 43 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.h
b/drivers/net/wireless/microchip/wilc1000/netdev.h
index 43c085c74b7a..bb1a315a7b7e 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.h
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.h
@@ -245,6 +245,7 @@ struct wilc {
u8 *rx_buffer;
u32 rx_buffer_offset;
u8 *tx_buffer;
+ u32 *vmm_table;
struct txq_handle txq[NQUEUES];
int txq_entries;
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c
b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 600cc57e9da2..b12f411aec06 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -28,6 +28,7 @@ struct wilc_sdio {
u32 block_size;
bool isinit;
int has_thrpt_enh3;
+ u8 *cmd53_buf;
};
struct sdio_cmd52 {
@@ -47,6 +48,7 @@ struct sdio_cmd53 {
u32 count: 9;
u8 *buffer;
u32 block_size;
+ u8 use_global_buf;
bool
};
static const struct wilc_hif_func wilc_hif_sdio;
@@ -91,6 +93,8 @@ static int wilc_sdio_cmd53(struct wilc *wilc, struct
sdio_cmd53 *cmd)
{
struct sdio_func *func = container_of(wilc->dev, struct sdio_func,
dev);
int size, ret;
+ struct wilc_sdio *sdio_priv = wilc->bus_data;
+ u8 *buf = cmd->buffer;
sdio_claim_host(func);
@@ -101,12 +105,19 @@ static int wilc_sdio_cmd53(struct wilc *wilc,
struct sdio_cmd53 *cmd)
else
size = cmd->count;
+ if (cmd->use_global_buf)
+ buf = sdio_priv->cmd53_buf;
There is no check if the size fits into the buffer. So maybe:
if (size > sizeof(u32))
return -EINVAL;
+
if (cmd->read_write) { /* write */
- ret = sdio_memcpy_toio(func, cmd->address,
- (void *)cmd->buffer, size);
+ if (cmd->use_global_buf)
+ memcpy(buf, cmd->buffer, size);
+
+ ret = sdio_memcpy_toio(func, cmd->address, buf, size);
} else { /* read */
- ret = sdio_memcpy_fromio(func, (void *)cmd->buffer,
- cmd->address, size);
+ ret = sdio_memcpy_fromio(func, buf, cmd->address, size);
+
+ if (cmd->use_global_buf)
+ memcpy(cmd->buffer, buf, size);
}
sdio_release_host(func);
@@ -128,6 +139,12 @@ static int wilc_sdio_probe(struct sdio_func *func,
if (!sdio_priv)
return -ENOMEM;
+ sdio_priv->cmd53_buf = kzalloc(sizeof(u32), GFP_KERNEL);
+ if (!sdio_priv->cmd53_buf) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
ret = wilc_cfg80211_init(&wilc, &func->dev, WILC_HIF_SDIO,
&wilc_hif_sdio);
if (ret)
@@ -161,6 +178,7 @@ static int wilc_sdio_probe(struct sdio_func *func,
irq_dispose_mapping(wilc->dev_irq_num);
wilc_netdev_cleanup(wilc);
free:
+ kfree(sdio_priv->cmd53_buf);
kfree(sdio_priv);
return ret;
}
@@ -172,6 +190,7 @@ static void wilc_sdio_remove(struct sdio_func
*func)
clk_disable_unprepare(wilc->rtc_clk);
wilc_netdev_cleanup(wilc);
+ kfree(sdio_priv->cmd53_buf);
kfree(sdio_priv);
}
@@ -375,8 +394,9 @@ static int wilc_sdio_write_reg(struct wilc *wilc,
u32 addr, u32 data)
cmd.address = WILC_SDIO_FBR_DATA_REG;
cmd.block_mode = 0;
cmd.increment = 1;
- cmd.count = 4;
+ cmd.count = sizeof(u32);
cmd.buffer = (u8 *)&data;
+ cmd.use_global_buf = 1;
true
cmd.block_size = sdio_priv->block_size;
ret = wilc_sdio_cmd53(wilc, &cmd);
if (ret)
@@ -414,6 +434,7 @@ static int wilc_sdio_write(struct wilc *wilc, u32
addr, u8 *buf, u32 size)
nblk = size / block_size;
nleft = size % block_size;
+ cmd.use_global_buf = 0;
if (nblk > 0) {
cmd.block_mode = 1;
cmd.increment = 1;
@@ -492,8 +513,9 @@ static int wilc_sdio_read_reg(struct wilc *wilc,
u32 addr, u32 *data)
cmd.address = WILC_SDIO_FBR_DATA_REG;
cmd.block_mode = 0;
cmd.increment = 1;
- cmd.count = 4;
+ cmd.count = sizeof(u32);
cmd.buffer = (u8 *)data;
+ cmd.use_global_buf = 1;
true
cmd.block_size = sdio_priv->block_size;
ret = wilc_sdio_cmd53(wilc, &cmd);
@@ -535,6 +557,7 @@ static int wilc_sdio_read(struct wilc *wilc, u32
addr, u8 *buf, u32 size)
nblk = size / block_size;
nleft = size % block_size;
+ cmd.use_global_buf = 0;
false
if (nblk > 0) {
cmd.block_mode = 1;
cmd.increment = 1;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c
b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 947d9a0a494e..58bbf50081e4 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -714,7 +714,7 @@ int wilc_wlan_handle_txq(struct wilc *wilc, u32
*txq_count)
int ret = 0;
int counter;
int timeout;
- u32 vmm_table[WILC_VMM_TBL_SIZE];
+ u32 *vmm_table = wilc->vmm_table;
u8 ac_pkt_num_to_chip[NQUEUES] = {0, 0, 0, 0};
const struct wilc_hif_func *func;
int srcu_idx;
@@ -1252,6 +1252,8 @@ void wilc_wlan_cleanup(struct net_device *dev)
while ((rqe = wilc_wlan_rxq_remove(wilc)))
kfree(rqe);
+ kfree(wilc->vmm_table);
+ wilc->vmm_table = NULL;
kfree(wilc->rx_buffer);
wilc->rx_buffer = NULL;
kfree(wilc->tx_buffer);
@@ -1489,6 +1491,14 @@ int wilc_wlan_init(struct net_device *dev)
goto fail;
}
+ if (!wilc->vmm_table)
+ wilc->vmm_table = kzalloc(WILC_VMM_TBL_SIZE, GFP_KERNEL);
+
+ if (!wilc->vmm_table) {
+ ret = -ENOBUFS;
+ goto fail;
+ }
+
if (!wilc->tx_buffer)
wilc->tx_buffer = kmalloc(WILC_TX_BUFF_SIZE, GFP_KERNEL);
@@ -1513,7 +1523,8 @@ int wilc_wlan_init(struct net_device *dev)
return 0;
fail:
-
+ kfree(wilc->vmm_table);
+ wilc->vmm_table = NULL;
kfree(wilc->rx_buffer);
wilc->rx_buffer = NULL;
kfree(wilc->tx_buffer);
--
-michael