From what I can tell, my 160Mhz STA was not properly connecting to a 160Mhz AP
because ieee80211_determine_chantype was not ORing in the IEEE80211_STA_DISABLE_EHT
flag. eht_oper is NULL in my case, as this is an AX radio on both sides.
The change below allows the STA to connect for me. I'm not sure if this
is the best fix or not, however....any opinions?
Thanks,
Ben
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6de771313657..d5ee411e6c93 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -167,7 +167,8 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_chan_def vht_chandef;
struct ieee80211_sta_ht_cap sta_ht_cap;
- u32 ht_cfreq, ret;
+ u32 ht_cfreq;
+ u32 ret = 0;
memset(chandef, 0, sizeof(struct cfg80211_chan_def));
chandef->chan = channel;
@@ -175,17 +176,18 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
chandef->center_freq1 = channel->center_freq;
chandef->freq1_offset = channel->freq_offset;
+ if (!eht_oper)
+ ret |= IEEE80211_STA_DISABLE_EHT;
+
if (channel->band == NL80211_BAND_6GHZ) {
if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper,
chandef)) {
mlme_dbg(sdata,
"bad 6 GHz operation, disabling HT/VHT/HE/EHT\n");
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT |
- IEEE80211_STA_DISABLE_HE |
- IEEE80211_STA_DISABLE_EHT;
- } else {
- ret = 0;
+ ret |= IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_HE |
+ IEEE80211_STA_DISABLE_EHT;
}
vht_chandef = *chandef;
goto out;
@@ -196,10 +198,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
chandef->width = ieee80211_s1g_channel_width(channel);
}
- ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ |
- IEEE80211_STA_DISABLE_VHT |
- IEEE80211_STA_DISABLE_80P80MHZ |
- IEEE80211_STA_DISABLE_160MHZ;
+ ret |= IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_80P80MHZ |
+ IEEE80211_STA_DISABLE_160MHZ;
goto out;
}
@@ -208,10 +210,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!ht_oper || !sta_ht_cap.ht_supported) {
mlme_dbg(sdata, "HT operation missing / HT not supported\n");
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT |
- IEEE80211_STA_DISABLE_HE |
- IEEE80211_STA_DISABLE_EHT;
+ ret |= IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_HE |
+ IEEE80211_STA_DISABLE_EHT;
goto out;
}
@@ -232,10 +234,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
"Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
channel->center_freq, ht_cfreq,
ht_oper->primary_chan, channel->band);
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT |
- IEEE80211_STA_DISABLE_HE |
- IEEE80211_STA_DISABLE_EHT;
+ ret |= IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_HE |
+ IEEE80211_STA_DISABLE_EHT;
goto out;
}
@@ -245,7 +247,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
} else {
mlme_dbg(sdata, "40 MHz not supported\n");
/* 40 MHz (and 80 MHz) must be supported for VHT */
- ret = IEEE80211_STA_DISABLE_VHT;
+ ret |= IEEE80211_STA_DISABLE_VHT;
/* also mark 40 MHz disabled */
ret |= IEEE80211_STA_DISABLE_40MHZ;
goto out;
@@ -253,7 +255,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!vht_oper || !sband->vht_cap.vht_supported) {
mlme_dbg(sdata, "VHT operation missing / VHT not supported\n");
- ret = IEEE80211_STA_DISABLE_VHT;
+ ret |= IEEE80211_STA_DISABLE_VHT;
goto out;
}
@@ -276,7 +278,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
sdata_info(sdata,
"HE AP VHT information is invalid, disabling HE\n");
- ret = IEEE80211_STA_DISABLE_HE | IEEE80211_STA_DISABLE_EHT;
+ ret |= IEEE80211_STA_DISABLE_HE | IEEE80211_STA_DISABLE_EHT;
goto out;
}
} else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
@@ -286,7 +288,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disabling VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
+ ret |= IEEE80211_STA_DISABLE_VHT;
goto out;
}
@@ -294,12 +296,11 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disabling VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
+ ret |= IEEE80211_STA_DISABLE_VHT;
goto out;
}
if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
- ret = 0;
goto out;
}
@@ -307,14 +308,12 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information doesn't match HT, disabling VHT\n");
- ret = IEEE80211_STA_DISABLE_VHT;
+ ret |= IEEE80211_STA_DISABLE_VHT;
goto out;
}
*chandef = vht_chandef;
- ret = 0;
-
out:
/*
* When tracking the current AP, don't do any further checks if the
@@ -354,10 +353,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
tracking ? 0 :
IEEE80211_CHAN_DISABLED)) {
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
- ret = IEEE80211_STA_DISABLE_HT |
- IEEE80211_STA_DISABLE_VHT |
- IEEE80211_STA_DISABLE_HE |
- IEEE80211_STA_DISABLE_EHT;
+ ret |= IEEE80211_STA_DISABLE_HT |
+ IEEE80211_STA_DISABLE_VHT |
+ IEEE80211_STA_DISABLE_HE |
+ IEEE80211_STA_DISABLE_EHT;
break;
}
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
