From: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx> We are using these two patches from Infineon (formerly Cypress) to enable AP+STA mode on our CYW89359-based platform. They come from the FMAC driver release package distributed by Infineon. The key thing here is that apsta needs to be set to 1 in order for AP mode to work concurrently with STA mode. I cannot speak for other chipsets so a review from the Broadcom side would be welcome here. For the ARP/ND offload being disabled in AP mode, I am of the view that this is correct, but while Arend has given his Reviewed-by on it previously, it was part of a different series [1], so I am sending without in order to jog some memories. [1] https://lore.kernel.org/linux-wireless/20201020022812.37064-3-wright.feng@xxxxxxxxxxx/#t Soontak Lee (1): brcmfmac: Support multiple AP interfaces and fix STA disconnection issue Ting-Ying Li (1): brcmfmac: don't allow arp/nd offload to be enabled if ap mode exists .../broadcom/brcm80211/brcmfmac/cfg80211.c | 65 +++++++++++++++---- .../broadcom/brcm80211/brcmfmac/cfg80211.h | 2 + .../broadcom/brcm80211/brcmfmac/common.c | 5 ++ .../broadcom/brcm80211/brcmfmac/core.c | 5 ++ 4 files changed, 66 insertions(+), 11 deletions(-) -- 2.37.0
