[PATCH 1/2] brcmfmac: Add brcmf_c_set_cur_etheraddr() helper

[Hans de Goede <hdegoede@xxxxxxxxxx>]

Add a little helper to send "cur_etheraddr" commands to the interface
and to handle the error reporting of it in a single place.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 .../broadcom/brcm80211/brcmfmac/common.c       | 18 +++++++++++++-----
 .../broadcom/brcm80211/brcmfmac/common.h       |  1 +
 .../broadcom/brcm80211/brcmfmac/core.c         |  8 ++------
 3 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index fe01da9e620d..dccd8f4ca1d0 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -190,6 +190,17 @@ static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
 	return err;
 }
 
+int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr)
+{
+	s32 err;
+
+	err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", addr, ETH_ALEN);
+	if (err < 0)
+		bphy_err(ifp->drvr, "Setting cur_etheraddr failed, %d\n", err);
+
+	return err;
+}
+
 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 {
 	struct brcmf_pub *drvr = ifp->drvr;
@@ -204,12 +215,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 
 	if (is_valid_ether_addr(ifp->mac_addr)) {
 		/* set mac address */
-		err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr,
-					       ETH_ALEN);
-		if (err < 0) {
-			bphy_err(ifp->drvr, "Setting cur_etheraddr failed, %d\n", err);
+		err = brcmf_c_set_cur_etheraddr(ifp, ifp->mac_addr);
+		if (err < 0)
 			goto done;
-		}
 	} else {
 		/* retrieve mac address */
 		err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
index 15accc88d5c0..7329eb751945 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -65,6 +65,7 @@ void brcmf_release_module_param(struct brcmf_mp_device *module_param);
 
 /* Sets dongle media info (drv_version, mac address). */
 int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
+int brcmf_c_set_cur_etheraddr(struct brcmf_if *ifp, const u8 *addr);
 
 #ifdef CONFIG_DMI
 void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 87aef211b35f..bd164a0821f9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -233,16 +233,12 @@ static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
 {
 	struct brcmf_if *ifp = netdev_priv(ndev);
 	struct sockaddr *sa = (struct sockaddr *)addr;
-	struct brcmf_pub *drvr = ifp->drvr;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
 
-	err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", sa->sa_data,
-				       ETH_ALEN);
-	if (err < 0) {
-		bphy_err(drvr, "Setting cur_etheraddr failed, %d\n", err);
-	} else {
+	err = brcmf_c_set_cur_etheraddr(ifp, sa->sa_data);
+	if (err >= 0) {
 		brcmf_dbg(TRACE, "updated to %pM\n", sa->sa_data);
 		memcpy(ifp->mac_addr, sa->sa_data, ETH_ALEN);
 		eth_hw_addr_set(ifp->ndev, ifp->mac_addr);
-- 
2.36.0