From: Chih-Kang Chang <gary.chang@xxxxxxxxxxx> HW scan need to start queues after switch to OP channel, and stop queues before leaving op channel. However, in original code, driver will start queues after switch to OP channel, but stop queues until switch to OP channel next time, that will cause packets transmitted in wrong channel. So we fix the stop queues timing. Signed-off-by: Chih-Kang Chang <gary.chang@xxxxxxxxxxx> Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> --- drivers/net/wireless/realtek/rtw88/fw.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c index efa51b2f53025..a644e2b617a14 100644 --- a/drivers/net/wireless/realtek/rtw88/fw.c +++ b/drivers/net/wireless/realtek/rtw88/fw.c @@ -2227,7 +2227,12 @@ void rtw_hw_scan_chan_switch(struct rtw_dev *rtwdev, struct sk_buff *skb) chan_type = COEX_SWITCH_TO_24G_NOFORSCAN; rtw_coex_switchband_notify(rtwdev, chan_type); } - if (rtw_is_op_chan(rtwdev, chan)) + /* The channel of C2H RTW_SCAN_NOTIFY_ID_PRESWITCH is next + * channel that hardware will switch. We need to stop queue + * if next channel is non-op channel. + */ + if (!rtw_is_op_chan(rtwdev, chan) && + rtw_is_op_chan(rtwdev, hal->current_channel)) ieee80211_stop_queues(rtwdev->hw); } -- 2.25.1
