Search Linux Wireless

Re: [PATCH v2 10/10] rtw88: disable powersave modes for USB devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 09, 2022 at 12:51:49PM +0000, Ping-Ke Shih wrote:
> On Tue, 2022-05-31 at 09:42 +0200, s.hauer@xxxxxxxxxxxxxx wrote:
> > On Tue, May 31, 2022 at 01:07:36AM +0000, Ping-Ke Shih wrote:
> > > On Mon, 2022-05-30 at 15:54 +0200, Sascha Hauer wrote:
> > > > The powersave modes do not work with USB devices (tested with a
> > > > RTW8822CU) properly. With powersave modes enabled the driver issues
> > > > messages like:
> > > > 
> > > > rtw_8822cu 1-1:1.2: firmware failed to leave lps state
> > > > rtw_8822cu 1-1:1.2: timed out to flush queue 3
> > > 
> > > Could you try module parameter rtw_disable_lps_deep_mode=1 to see
> > > if it can work?
> > 
> > No, this module parameter doesn't seem to make any difference.
> > 
> > # cat /sys/module/rtw88_core/parameters/disable_lps_deep
> > Y
> > 
> > Still "firmware failed to leave lps state" and poor performance.
> > 
> > Any other ideas what may go wrong here?
> > 
> 
> Today, I borrow a 8822cu, and use your patchset but revert
> patch 10/10 to reproduce this issue. With firmware 7.3.0,
> it looks bad. After checking something about firmware, I
> found the firmware is old, so upgrade to 9.9.11, and then
> it works well for 10 minutes, no abnormal messages.

I originally used firmware 5.0.0. Then I have tried 9.9.6 I have lying
around here from my distro. That version behaves like the old 5.0.0
version. Finally I switched to 9.9.11 from current linux-firmware
repository. That doesn't work at all for me unfortunately:

[  221.076279] rtw_8822cu 2-1:1.2: Firmware version 9.9.11, H2C version 15
[  221.078405] rtw_8822cu 2-1:1.2: Firmware version 9.9.4, H2C version 15
[  239.783261] wlan0: authenticate with 76:83:c2:ce:83:0b
[  242.398435] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[  242.402992] wlan0: authenticated
[  242.420735] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[  242.437094] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[  242.485521] wlan0: associated
[  242.564847] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[  244.577617] wlan0: authenticate with 76:83:c2:cd:83:0b
[  244.578257] wlan0: bad VHT capabilities, disabling VHT
[  246.866182] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)
[  246.871830] wlan0: authenticated
[  246.892754] wlan0: associate with 76:83:c2:cd:83:0b (try 1/3)
[  246.911045] wlan0: RX AssocResp from 76:83:c2:cd:83:0b (capab=0x1431 status=0 aid=3)
[  246.940608] wlan0: associated
[  247.152308] wlan0: Connection to AP 76:83:c2:cd:83:0b lost
[  248.912821] wlan0: Connection to AP 00:00:00:00:00:00 lost
[  249.105517] wlan0: authenticate with 76:83:c2:ce:83:0b
[  251.482183] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[  251.486765] wlan0: authenticated
[  251.508731] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[  251.521904] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[  251.565233] wlan0: associated
[  251.720602] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[  253.527904] wlan0: Connection to AP 00:00:00:00:00:00 lost
[  253.728243] wlan0: authenticate with 76:83:c2:cd:83:0b
[  253.728921] wlan0: bad VHT capabilities, disabling VHT
[  256.014184] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)
[  256.019608] wlan0: authenticated
[  256.044702] wlan0: associate with 76:83:c2:cd:83:0b (try 1/3)
[  256.062049] wlan0: RX AssocResp from 76:83:c2:cd:83:0b (capab=0x1431 status=0 aid=3)
[  256.093117] wlan0: associated
[  256.169071] wlan0: Connection to AP 76:83:c2:cd:83:0b lost
[  258.145286] wlan0: authenticate with 76:83:c2:ce:83:0b
[  260.626182] wlan0: send auth to 76:83:c2:ce:83:0b (try 1/3)
[  260.630495] wlan0: authenticated
[  260.652783] wlan0: associate with 76:83:c2:ce:83:0b (try 1/3)
[  260.666201] wlan0: RX AssocResp from 76:83:c2:ce:83:0b (capab=0x1411 status=0 aid=4)
[  260.708596] wlan0: associated
[  260.769613] wlan0: Connection to AP 76:83:c2:ce:83:0b lost
[  262.770668] wlan0: authenticate with 76:83:c2:cd:83:0b
[  262.771272] wlan0: bad VHT capabilities, disabling VHT
[  265.158184] wlan0: send auth to 76:83:c2:cd:83:0b (try 1/3)

This goes on forever. I finally tried 9.9.10 and 9.9.9, they also behave
like 9.9.11.

No luck today :(

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux