On Mon, 2022-05-23 at 08:53 +0200, Sascha Hauer wrote: > Hi Hans Ulli, > > On Mon, May 23, 2022 at 06:07:16AM +0200, Hans Ulli Kroll wrote: > > On Wed, 2022-05-18 at 10:23 +0200, Sascha Hauer wrote: > > > This series adds support for the USB chip variants to the RTW88 driver. > > > > > > > Hi Sascha > > > > glad you found some *working* devices for rtw88 ! > > Well, not fully. I had to add [3] = RTW_DEF_RFE(8822c, 0, 0), to the > rtw8822c_rfe_defs array. > > > I spend some of the weekend testing your driver submission. > > > > for rtl8821cu devices I get following output > > > > some Logilink device > > > > [ 1686.605567] usb 1-5.1.2: New USB device found, idVendor=0bda, idProduct=c811, bcdDevice= > > 2.00 > > [ 1686.614186] usb 1-5.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > [ 1686.621721] usb 1-5.1.2: Product: 802.11ac NIC > > [ 1686.626227] usb 1-5.1.2: Manufacturer: Realtek > > [ 1686.630695] usb 1-5.1.2: SerialNumber: 123456 > > [ 1686.640480] rtw_8821cu 1-5.1.2:1.0: Firmware version 24.5.0, H2C version 12 > > [ 1686.932828] rtw_8821cu 1-5.1.2:1.0: failed to download firmware > > [ 1686.945206] rtw_8821cu 1-5.1.2:1.0: failed to setup chip efuse info > > [ 1686.951538] rtw_8821cu 1-5.1.2:1.0: failed to setup chip information > > [ 1686.958402] rtw_8821cu: probe of 1-5.1.2:1.0 failed with error -22 > > > > above is same with some from Comfast > > > > The worst in the list is one from EDUP > > > > [ 1817.855704] rtw_8821cu 1-5.1.2:1.2: Firmware version 24.5.0, H2C version 12 > > [ 1818.153918] rtw_8821cu 1-5.1.2:1.2: rfe 255 isn't supported > > [ 1818.165176] rtw_8821cu 1-5.1.2:1.2: failed to setup chip efuse info > > [ 1818.171505] rtw_8821cu 1-5.1.2:1.2: failed to setup chip information > > Do these chips work with your out of tree variant of this driver? > > Is the efuse info completely 0xff or only the field indicating the rfe > option? I check RFE allocation of 8821c. 255 isn't defined. If efuse info isn't complete 0xff, try to force RFE 0 to see if it works. > > > rtl8822bu devices are working fine ... > > Nice. Did you test a rtw8723du device as well? > I have a 8723DU module. With this patchset, it can find AP, but can't estiablish connection. I check air capture, but no TX packets found. That says RX works, but TX doesn't. With master branch of Hans Ulli GitHub, it shows many "atomic scheduling" warnings when I insert the USB dongle. When I do 'iw scan', it is going to get stuck, and I can only push power button to turn off my laptop. Ping-Ke
