Ping-Ke Shih <pkshih@xxxxxxxxxxx> wrote: > 8852CE uses different but similar IMR/ISR registers, and its masks are also > different in various states, so add config_intr_mask ops to configure masks > according to under_recovery or low_power states. > > Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> 14 patches applied to wireless-next.git, thanks. 948e521c7285 rtw89: pci: add variant IMR/ISR and configure functions e1757e804501 rtw89: pci: add variant RPWM/CPWM to enter low power mode 837202684657 rtw89: pci: reclaim TX BD only if it really need c83dcd0508e2 rtw89: pci: add a separate interrupt handler for low power mode 98816def1973 rtw89: ser: re-enable interrupt in threadfn if under_recovery 52edbb9fb78a rtw89: ps: access TX/RX rings via another registers in low power mode d7259cdbd055 rtw89: pci: allow to process RPP prior to TX BD fc5f311fce74 rtw89: don't flush hci queues and send h2c if power is off 16b44ed0ffd3 rtw89: add RF H2C to notify firmware cd89a47105dc rtw89: 8852c: configure default BB TX/RX path af0cac159b1c rtw89: 8852c: implement chip_ops related to TX power 3ecca403d9bf rtw89: 8852c: implement chip_ops::get_thermal f4ae7ccc2bbf rtw89: 8852c: fill freq and band of RX status by PPDU report 2fb822f82a59 rtw89: 8852c: add chip_ops related to BTC -- https://patchwork.kernel.org/project/linux-wireless/patch/20220421120903.73715-2-pkshih@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
