[PATCH] rtw88: use the correct bit in the REG_HCI_OPT_CTRL register

[Kevin Lo <kevlo@xxxxxxxxx>]

Write the BIT_USB_SUS_DIS bit rather than BIT_BT_DIG_CLK_EN to the
REG_HCI_OPT_CTRL register for fixing failure to PCIe power on.

Signed-off-by: Kevin Lo <kevlo@xxxxxxxxx>
---
diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index d1678aed9d9c..caf2603da2d6 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -75,7 +75,7 @@ static int rtw_mac_pre_system_cfg(struct rtw_dev *rtwdev)
 
 	switch (rtw_hci_type(rtwdev)) {
 	case RTW_HCI_TYPE_PCIE:
-		rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_BT_DIG_CLK_EN);
+		rtw_write32_set(rtwdev, REG_HCI_OPT_CTRL, BIT_USB_SUS_DIS);
 		break;
 	case RTW_HCI_TYPE_USB:
 		break;