Christian, Many thanks for the renaming of the firmware for p54usb. With this change, I can keep an old version of the firmware (2.5.8.0.arm) named isl3887usb_bare and a new one (2.13.1.0.arm.1) named isl3887usb in /lib/firmware and run the trees from Linus and wireless-testing without messing with the firmware. I have discovered one anomaly that shows up with firmware 2.5.8.0.arm. If the USB device is unplugged and replugged, mac80211 will log the warning from net/mac80211/main.c:234 because p54_config() returns an error. The source of the error is p54_assign_address(), where target_skb is NULL. That happens because priv->rx_end - last_addr is 32 whereas the value of len is 160 - thus target_skb never gets set. I have not seen this problem with firmware 2.13.1.arm.1, nor does it occur if the driver is removed before the USB device is replugged. If you have any suggestions regarding debugging, please let me know. Larry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
