Hello, this series introduces driver support for hardware encapsulation offloading feature. The main goal of the series is an overall improvement of system performance. On a QCA9563+QCA9888-based access point in bridged mode, encapsulation offloading increases TCP 16-streams DL throughput from 365 to 396 mbps (+8%) and UDP DL throughput from 436 to 483 mbps (+11%). The series consist of three patches, the first two prepare the code, and the last one introduces the offloading support itself. The first patch reworks transmission status reporting to make it flexible enough to support 802.11 and Ethernet encapsulated frames reporting. The second patch reworks the module parameter that configures the main encapsulation format of frames that are passed from the driver to the hardware. It makes it possible to configure more encapsulation methods than just raw or not-raw. And, as stated before, the third patch actually introduces offloading support. It changes a couple of frame analysis places along the xmit path and starts reporting offloading support to mac80211 via the corresponding hw attribute. The new feature has been extensively tested with QCA9888 and works well, but it may introduces some regression for other untested chips. So the series is just an RFC for now. Sergey Ryazanov (3): ath10k: improve tx status reporting ath10k: turn rawmode into frame_mode ath10k: add encapsulation offloading support drivers/net/wireless/ath/ath10k/core.c | 11 +++-- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/mac.c | 67 +++++++++++++++++++++----- drivers/net/wireless/ath/ath10k/txrx.c | 12 ++++- 4 files changed, 73 insertions(+), 18 deletions(-) -- 2.34.1
