Search Linux Wireless

[PATCH v5.18] Revert "ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit 743b9065fe6348a5f8f5ce04869ce2d701e5e1bc.

The original commit breaks the 256 bitmap in blockack frames in AP
mode. After reverting the commit the feature works again in both AP and
mesh modes

Tested-on: IPQ8074 hw2.0 PCI WLAN.HK.2.6.0.1-00786-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <quic_akolli@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/mac.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 175a4ae752f3..ca998fb13b62 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3150,6 +3150,20 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 			arvif->do_not_send_tmpl = true;
 		else
 			arvif->do_not_send_tmpl = false;
+
+		if (vif->bss_conf.he_support) {
+			ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+							    WMI_VDEV_PARAM_BA_MODE,
+							    WMI_BA_MODE_BUFFER_SIZE_256);
+			if (ret)
+				ath11k_warn(ar->ab,
+					    "failed to set BA BUFFER SIZE 256 for vdev: %d\n",
+					    arvif->vdev_id);
+			else
+				ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+					   "Set BA BUFFER SIZE 256 for VDEV: %d\n",
+					   arvif->vdev_id);
+		}
 	}
 
 	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
@@ -3185,14 +3199,6 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 
 		if (arvif->is_up && vif->bss_conf.he_support &&
 		    vif->bss_conf.he_oper.params) {
-			ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
-							    WMI_VDEV_PARAM_BA_MODE,
-							    WMI_BA_MODE_BUFFER_SIZE_256);
-			if (ret)
-				ath11k_warn(ar->ab,
-					    "failed to set BA BUFFER SIZE 256 for vdev: %d\n",
-					    arvif->vdev_id);
-
 			param_id = WMI_VDEV_PARAM_HEOPS_0_31;
 			param_value = vif->bss_conf.he_oper.params;
 			ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
-- 
2.7.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux