Search Linux Wireless

Re: [PATCH 09/22] gpio-winbond: Use C99 initializers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Mar 26, 2022 at 6:00 PM Benjamin Stürz <benni@xxxxxxxxxx> wrote:
>
> This replaces comments with C99's designated
> initializers because the kernel supports them now.
>
> Signed-off-by: Benjamin Stürz <benni@xxxxxxxxxx>
> ---
>  drivers/gpio/gpio-winbond.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpio/gpio-winbond.c b/drivers/gpio/gpio-winbond.c
> index 7f8f5b02e31d..0b637fdb407c 100644
> --- a/drivers/gpio/gpio-winbond.c
> +++ b/drivers/gpio/gpio-winbond.c
> @@ -249,7 +249,7 @@ struct winbond_gpio_info {
>  };
>
>  static const struct winbond_gpio_info winbond_gpio_infos[6] = {
> -       { /* 0 */
> +       [0] = {
>                 .dev = WB_SIO_DEV_GPIO12,
>                 .enablereg = WB_SIO_GPIO12_REG_ENABLE,
>                 .enablebit = WB_SIO_GPIO12_ENABLE_1,
> @@ -266,7 +266,7 @@ static const struct winbond_gpio_info winbond_gpio_infos[6] = {
>                         .warnonly = true
>                 }
>         },
> -       { /* 1 */
> +       [1] = {
>                 .dev = WB_SIO_DEV_GPIO12,
>                 .enablereg = WB_SIO_GPIO12_REG_ENABLE,
>                 .enablebit = WB_SIO_GPIO12_ENABLE_2,
> @@ -277,7 +277,7 @@ static const struct winbond_gpio_info winbond_gpio_infos[6] = {
>                 .datareg = WB_SIO_GPIO12_REG_DATA2
>                 /* special conflict handling so doesn't use conflict data */
>         },
> -       { /* 2 */
> +       [2] = {
>                 .dev = WB_SIO_DEV_GPIO34,
>                 .enablereg = WB_SIO_GPIO34_REG_ENABLE,
>                 .enablebit = WB_SIO_GPIO34_ENABLE_3,
> @@ -294,7 +294,7 @@ static const struct winbond_gpio_info winbond_gpio_infos[6] = {
>                         .warnonly = true
>                 }
>         },
> -       { /* 3 */
> +       [3] = {
>                 .dev = WB_SIO_DEV_GPIO34,
>                 .enablereg = WB_SIO_GPIO34_REG_ENABLE,
>                 .enablebit = WB_SIO_GPIO34_ENABLE_4,
> @@ -311,7 +311,7 @@ static const struct winbond_gpio_info winbond_gpio_infos[6] = {
>                         .warnonly = true
>                 }
>         },
> -       { /* 4 */
> +       [4] = {
>                 .dev = WB_SIO_DEV_WDGPIO56,
>                 .enablereg = WB_SIO_WDGPIO56_REG_ENABLE,
>                 .enablebit = WB_SIO_WDGPIO56_ENABLE_5,
> @@ -328,7 +328,7 @@ static const struct winbond_gpio_info winbond_gpio_infos[6] = {
>                         .warnonly = true
>                 }
>         },
> -       { /* 5 */
> +       [5] = {
>                 .dev = WB_SIO_DEV_WDGPIO56,
>                 .enablereg = WB_SIO_WDGPIO56_REG_ENABLE,
>                 .enablebit = WB_SIO_WDGPIO56_ENABLE_6,
> --
> 2.35.1
>

Acked-by: Bartosz Golaszewski <brgl@xxxxxxxx>




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux