Search Linux Wireless

[PATCH v3 09/12] ath11k: Do not put HW in DBS mode for WCN6750

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Though WCN6750 is a single PDEV device, it is not a
DBS solution. So, do not put HW in DBS mode for WCN6750.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/core.c | 2 +-
 drivers/net/wireless/ath/ath11k/wmi.c  | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 1955426ca549..d9a06629651c 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -1249,7 +1249,7 @@ static int ath11k_core_start(struct ath11k_base *ab,
 	}
 
 	/* put hardware to DBS mode */
-	if (ab->hw_params.single_pdev_only) {
+	if (ab->hw_params.single_pdev_only && ab->hw_params.num_rxmda_per_pdev > 1) {
 		ret = ath11k_wmi_set_hw_mode(ab, WMI_HOST_HW_MODE_DBS);
 		if (ret) {
 			ath11k_err(ab, "failed to send dbs mode: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 7f97c26bffd9..119fe1e6a07a 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/skbuff.h>
 #include <linux/ctype.h>
@@ -8196,7 +8197,7 @@ int ath11k_wmi_attach(struct ath11k_base *ab)
 	ab->wmi_ab.preferred_hw_mode = WMI_HOST_HW_MODE_MAX;
 
 	/* It's overwritten when service_ext_ready is handled */
-	if (ab->hw_params.single_pdev_only)
+	if (ab->hw_params.single_pdev_only && ab->hw_params.num_rxmda_per_pdev > 1)
 		ab->wmi_ab.preferred_hw_mode = WMI_HOST_HW_MODE_SINGLE;
 
 	/* TODO: Init remaining wmi soc resources required */
-- 
2.35.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux