Search Linux Wireless

[RFC PATCH 00/10] mmc: improve API to make clear {h|s}w_reset is for cards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As discussed in 2020 [1], Ulf and I agreed that it would be easier to
understand the {h|s}w_reset mechanisms if it was clear that they are for
cards. This RFC series implements that by adding 'card' to the function
names and changing the parameter to mmc_card where apropriate. Note that
I only changed the MMC core. The SDHCI driver still uses hw_reset in its
ops, I leave it to the SDHCI maintainers if they want to change that.
Also, I didn't convert CAP_HW_RESET to CAP_CARD_HW_RESET yet although it
should be done IMHO. However, we need an agreement on that first.
Finally, I also did not check if all the host drivers are really doing a
card reset or a controller reset. I tried but it was often not obvious
what is actually happening in these functions without proper manuals.

I tested it with my Renesas boards, so far no regressions. Buildbots are
currently checking the series. For this RFC, I sent this as one series
so people can get an overview and comment on that. For a proper release,
I think patches 1-5 should be one series, and 7-10 probably. Patch 6
could then be applied once patches 2-4 hit the net tree. That's my
proposal.

This series is based on mmc/next as of yesterday. A branch is here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/mmc/reset-api

Looking forward to comments. Happy hacking,

   Wolfram

[1] https://lore.kernel.org/all/20200916090121.2350-1-wsa+renesas@xxxxxxxxxxxxxxxxxxxx/

Wolfram Sang (10):
  mmc: core: improve API to make clear mmc_hw_reset is for cards
  ath10k: sdio: update to new MMC API for resetting cards
  brcmfmac: sdio: update to new MMC API for resetting cards
  mwifiex: sdio: update to new MMC API for resetting cards
  wlcore: sdio: update to new MMC API for resetting cards
  mmc: core: remove fallback for mmc_hw_reset()
  mmc: core: improve API to make clear that mmc_sw_reset is for cards
  mmc: core: improve API to make clear hw_reset from bus_ops is for
    cards
  mmc: core: improve API to make clear sw_reset from bus_ops is for
    cards
  mmc: improve API to make clear hw_reset callback is for cards

 drivers/mmc/core/block.c                      |  2 +-
 drivers/mmc/core/core.c                       | 31 ++++++++++---------
 drivers/mmc/core/core.h                       |  4 +--
 drivers/mmc/core/mmc.c                        | 10 +++---
 drivers/mmc/core/mmc_test.c                   |  3 +-
 drivers/mmc/core/sd.c                         |  8 ++---
 drivers/mmc/core/sdio.c                       | 12 ++++---
 drivers/mmc/host/bcm2835.c                    |  2 +-
 drivers/mmc/host/dw_mmc.c                     |  2 +-
 drivers/mmc/host/meson-mx-sdhc-mmc.c          |  2 +-
 drivers/mmc/host/mtk-sd.c                     |  2 +-
 drivers/mmc/host/sdhci.c                      |  2 +-
 drivers/mmc/host/sunxi-mmc.c                  |  2 +-
 drivers/mmc/host/uniphier-sd.c                |  2 +-
 drivers/net/wireless/ath/ath10k/sdio.c        |  2 +-
 .../broadcom/brcm80211/brcmfmac/sdio.c        |  2 +-
 drivers/net/wireless/marvell/mwifiex/sdio.c   |  2 +-
 drivers/net/wireless/ti/wlcore/sdio.c         |  2 +-
 include/linux/mmc/core.h                      |  4 +--
 include/linux/mmc/host.h                      |  2 +-
 20 files changed, 51 insertions(+), 47 deletions(-)

-- 
2.30.2




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux