Replace other constants with AR9300_MAX_CHAINS when appropriate.
This change does not appear to affect the final binary.
Signed-off-by: Wenli Looi <wlooi@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index dc24da1ff..6ca089f15 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -177,7 +177,7 @@ static void ar9003_hw_iqcal_collect(struct ath_hw *ah)
int i;
/* Accumulate IQ cal measures for active chains */
- for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (ah->txchainmask & BIT(i)) {
ah->totalPowerMeasI[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index b0a4ca355..669b49b56 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3911,7 +3911,7 @@ static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
}
/* Test value. if 0 then attenuation is unused. Don't load anything. */
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (ah->txchainmask & BIT(i)) {
value = ar9003_hw_atten_chain_get(ah, i, chan);
REG_RMW_FIELD(ah, ext_atten_reg[i],
@@ -5126,7 +5126,7 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
frequency, correction[0], correction[1], correction[2]);
/* Store calibrated noise floor values */
- for (ichain = 0; ichain < AR5416_MAX_CHAINS; ichain++)
+ for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++)
if (mode) {
ah->nf_5g.cal[ichain] = nf_cal[ichain];
ah->nf_5g.pwr[ichain] = nf_pwr[ichain];
--
2.25.1
