From: Deren Wu <deren.wu@xxxxxxxxxxxx> Due to the missing IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN in status report, the HE rate in wirehsark/tcpdump always shows wrong value. Applications will refer to IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC when the flag is set and shows the correct data rate. Reviewed-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> Signed-off-by: Deren Wu <deren.wu@xxxxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 6 ++++-- drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c index 47d5a993c9c7..e9e7efbf350d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c @@ -349,14 +349,16 @@ mt7915_mac_decode_he_radiotap(struct sk_buff *skb, __le32 *rxv, u32 mode) case MT_PHY_TYPE_HE_SU: he->data1 |= HE_BITS(DATA1_FORMAT_SU) | HE_BITS(DATA1_UL_DL_KNOWN) | - HE_BITS(DATA1_BEAM_CHANGE_KNOWN); + HE_BITS(DATA1_BEAM_CHANGE_KNOWN) | + HE_BITS(DATA1_BW_RU_ALLOC_KNOWN); he->data3 |= HE_PREP(DATA3_BEAM_CHANGE, BEAM_CHNG, rxv[14]) | HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]); break; case MT_PHY_TYPE_HE_EXT_SU: he->data1 |= HE_BITS(DATA1_FORMAT_EXT_SU) | - HE_BITS(DATA1_UL_DL_KNOWN); + HE_BITS(DATA1_UL_DL_KNOWN) | + HE_BITS(DATA1_BW_RU_ALLOC_KNOWN); he->data3 |= HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]); break; diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c index 8bd8b4fe1047..3ff2a4c428ce 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c @@ -304,14 +304,16 @@ mt7921_mac_decode_he_radiotap(struct sk_buff *skb, __le32 *rxv, u32 mode) case MT_PHY_TYPE_HE_SU: he->data1 |= HE_BITS(DATA1_FORMAT_SU) | HE_BITS(DATA1_UL_DL_KNOWN) | - HE_BITS(DATA1_BEAM_CHANGE_KNOWN); + HE_BITS(DATA1_BEAM_CHANGE_KNOWN) | + HE_BITS(DATA1_BW_RU_ALLOC_KNOWN); he->data3 |= HE_PREP(DATA3_BEAM_CHANGE, BEAM_CHNG, rxv[14]) | HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]); break; case MT_PHY_TYPE_HE_EXT_SU: he->data1 |= HE_BITS(DATA1_FORMAT_EXT_SU) | - HE_BITS(DATA1_UL_DL_KNOWN); + HE_BITS(DATA1_UL_DL_KNOWN) | + HE_BITS(DATA1_BW_RU_ALLOC_KNOWN); he->data3 |= HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]); break; -- 2.18.0
