Search Linux Wireless

[PATCH V2] ath9k: Use platform_get_irq() to get the interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Minghao Chi <chi.minghao@xxxxxxxxxx>

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@xxxxxxxxxx>
Signed-off-by: Minghao Chi <chi.minghao@xxxxxxxxxx>
---
v1->v2:
  - Retain dev_err() call on failure

 drivers/net/wireless/ath/ath9k/ahb.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index cdefb8e2daf1..28c45002c115 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -98,14 +98,12 @@ static int ath_ahb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res == NULL) {
+	irq = platform_get_resource(pdev, 0);
+	if (irq < 0) {
 		dev_err(&pdev->dev, "no IRQ resource found\n");
-		return -ENXIO;
+		return irq;
 	}
 
-	irq = res->start;
-
 	ath9k_fill_chanctx_ops();
 	hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
 	if (hw == NULL) {
-- 
2.25.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux