So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx> --- v2: * roll in the RTS/CTS rate and short preamble fixes * fix the struct layout to make it compile on 64-bit and increase MAX_TX_RATES to 5 because the space gets padded out anyway; * fix rt2x00 (it uses driver_data) * make a number of other drivers that don't need as much driver_data use rate_driver_data to keep the rate information intact * document ieee80211_tx_info_clear_status -- especially that it's not safe when you used driver_data tested with p54 (chr), ath5k (nbd), zd1211, b43, iwl5000, ath9k (me) works (well as far as zd1211 can "work" and only ath9k runs into the WARN_ON_ONCE in tx.c more work is probably needed for HT/MCS drivers/net/wireless/adm8211.c | 21 - drivers/net/wireless/ath5k/base.c | 34 +- drivers/net/wireless/ath9k/main.c | 18 - drivers/net/wireless/ath9k/rc.c | 40 +- drivers/net/wireless/ath9k/xmit.c | 28 +- drivers/net/wireless/b43/dma.c | 4 drivers/net/wireless/b43/main.c | 2 drivers/net/wireless/b43/pio.c | 3 drivers/net/wireless/b43/xmit.c | 60 +++- drivers/net/wireless/b43/xmit.h | 5 drivers/net/wireless/b43legacy/dma.c | 46 ++- drivers/net/wireless/b43legacy/main.c | 2 drivers/net/wireless/b43legacy/pio.c | 31 ++ drivers/net/wireless/b43legacy/xmit.c | 26 + drivers/net/wireless/b43legacy/xmit.h | 2 drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 57 +--- drivers/net/wireless/iwlwifi/iwl-3945.c | 62 ++++ drivers/net/wireless/iwlwifi/iwl-3945.h | 2 drivers/net/wireless/iwlwifi/iwl-4965.c | 8 drivers/net/wireless/iwlwifi/iwl-5000.c | 8 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 37 +- drivers/net/wireless/iwlwifi/iwl-core.c | 19 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 drivers/net/wireless/libertas_tf/main.c | 4 drivers/net/wireless/mac80211_hwsim.c | 12 drivers/net/wireless/p54/p54common.c | 26 - drivers/net/wireless/rt2x00/rt2x00dev.c | 14 - drivers/net/wireless/rt2x00/rt2x00mac.c | 14 - drivers/net/wireless/rt2x00/rt2x00queue.c | 22 + drivers/net/wireless/rt2x00/rt2x00queue.h | 9 drivers/net/wireless/rtl8180_dev.c | 28 +- drivers/net/wireless/rtl8187_dev.c | 18 - drivers/net/wireless/zd1211rw/zd_mac.c | 32 +- drivers/net/wireless/zd1211rw/zd_usb.c | 2 include/net/mac80211.h | 252 +++++++++++------- net/mac80211/ieee80211_i.h | 8 net/mac80211/main.c | 54 +++ net/mac80211/mesh_hwmp.c | 6 net/mac80211/rate.c | 50 +-- net/mac80211/rate.h | 5 net/mac80211/rc80211_minstrel.c | 72 ++--- net/mac80211/rc80211_pid.h | 1 net/mac80211/rc80211_pid_algo.c | 27 + net/mac80211/rc80211_pid_debugfs.c | 5 net/mac80211/sta_info.h | 4 net/mac80211/tx.c | 382 +++++++++++++--------------- net/mac80211/wext.c | 4 47 files changed, 886 insertions(+), 685 deletions(-) --- everything.orig/include/net/mac80211.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/include/net/mac80211.h 2008-10-14 16:52:40.000000000 +0200 @@ -222,29 +222,24 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons and always be clear for frames without a sequence number field. * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination * station - * @IEEE80211_TX_CTL_REQUEUE: TBD * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD - * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long retry value * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted from antenna_sel_tx, - * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n - * antennas marked use MIMO_n. - * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval - * @IEEE80211_TX_CTL_INJECTED: TBD + * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211. * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged @@ -252,62 +247,70 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). - * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence - * number to this frame, taking care of not overwriting the fragment - * number and increasing the sequence number only when the - * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly - * assign sequence numbers to QoS-data frames but cannot do so correctly - * for non-QoS-data and management frames because beacons need them from - * that counter as well and mac80211 cannot guarantee proper sequencing. - * If this flag is set, the driver should instruct the hardware to - * assign a sequence number to the frame or assign one itself. Cf. IEEE - * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for - * beacons always be clear for frames without a sequence number field. + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be + * set by rate control algorithms to indicate probe rate, will + * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_CTL_REQUEUE: REMOVE THIS */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), - IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), - IEEE80211_TX_CTL_NO_ACK = BIT(4), - IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), - IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), - IEEE80211_TX_CTL_REQUEUE = BIT(7), - IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), - IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), - IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), - IEEE80211_TX_CTL_AMPDU = BIT(13), - IEEE80211_TX_CTL_OFDM_HT = BIT(14), - IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), - IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), - IEEE80211_TX_CTL_DUP_DATA = BIT(17), - IEEE80211_TX_CTL_SHORT_GI = BIT(18), - IEEE80211_TX_CTL_INJECTED = BIT(19), - IEEE80211_TX_STAT_TX_FILTERED = BIT(20), - IEEE80211_TX_STAT_ACK = BIT(21), - IEEE80211_TX_STAT_AMPDU = BIT(22), - IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), - IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1), + IEEE80211_TX_CTL_NO_ACK = BIT(2), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5), + IEEE80211_TX_CTL_AMPDU = BIT(6), + IEEE80211_TX_CTL_INJECTED = BIT(7), + IEEE80211_TX_STAT_TX_FILTERED = BIT(8), + IEEE80211_TX_STAT_ACK = BIT(9), + IEEE80211_TX_STAT_AMPDU = BIT(10), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + + /* XXX: remove this */ + IEEE80211_TX_CTL_REQUEUE = BIT(13), +}; + +enum mac80211_rate_control_flags { + IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), + IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), + IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2), + + /* rate index is an MCS rate number instead of an index */ + IEEE80211_TX_RC_MCS = BIT(3), + IEEE80211_TX_RC_GREEN_FIELD = BIT(4), + IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5), + IEEE80211_TX_RC_DUP_DATA = BIT(6), + IEEE80211_TX_RC_SHORT_GI = BIT(7), }; -#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ - (sizeof(((struct sk_buff *)0)->cb) - 8) -#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ - (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) +/* there are 40 bytes if you don't need the rateset to be kept */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40 + +/* if you do need the rateset, then you have less space */ +#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24 -/* maximum number of alternate rate retry stages */ -#define IEEE80211_TX_MAX_ALTRATE 3 +/* maximum number of rate stages */ +#define IEEE80211_TX_MAX_RATES 5 /** - * struct ieee80211_tx_altrate - alternate rate selection/status + * struct ieee80211_tx_rate - rate selection/status * - * @rate_idx: rate index to attempt to send with + * @idx: rate index to attempt to send with + * @flags: rate control flags (&enum mac80211_rate_control_flags) * @limit: number of retries before fallback + * + * A value of -1 for @idx indicates an invalid rate and, if used + * in an array of retry rates, that no more rates should be tried. + * + * When used for transmit status reporting, the driver should + * always report the rate along with the flags it used. */ -struct ieee80211_tx_altrate { - s8 rate_idx; - u8 limit; +struct ieee80211_tx_rate { + s8 idx; + u8 count; + u8 flags; }; /** @@ -322,15 +325,12 @@ struct ieee80211_tx_altrate { * it may be NULL. * * @flags: transmit info flags, defined above - * @band: TBD - * @tx_rate_idx: TBD + * @band: the band to transmit on (use for checking for races) * @antenna_sel_tx: antenna to use, 0 for automatic diversity * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. @@ -341,31 +341,43 @@ struct ieee80211_tx_info { /* common information */ u32 flags; u8 band; - s8 tx_rate_idx; + u8 antenna_sel_tx; - /* 1 byte hole */ + /* 2 byte hole */ union { struct { + union { + /* rate control */ + struct { + struct ieee80211_tx_rate rates[ + IEEE80211_TX_MAX_RATES]; + s8 rts_cts_rate_idx; + }; + /* only needed before rate control */ + unsigned long jiffies; + }; /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; struct ieee80211_sta *sta; - unsigned long jiffies; - s8 rts_cts_rate_idx; - u8 retry_limit; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE]; } control; struct { + struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; + u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1]; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; + /* 8 bytes free */ } status; - void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + struct { + struct ieee80211_tx_rate driver_rates[ + IEEE80211_TX_MAX_RATES]; + void *rate_driver_data[ + IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; + }; + void *driver_data[ + IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)]; }; }; @@ -374,6 +386,41 @@ static inline struct ieee80211_tx_info * return (struct ieee80211_tx_info *)skb->cb; } +/** + * ieee80211_tx_info_clear_status - clear TX status + * + * @info: The &struct ieee80211_tx_info to be cleared. + * + * When the driver passes an skb back to mac80211, it must report + * a number of things in TX status. This function clears everything + * in the TX status but the rate control information (it does clear + * the count since you need to fill that in anyway). + * + * NOTE: You can only use this function if you do NOT use + * info->driver_data! Use info->rate_driver_data + * instead if you need only the less space that allows. + */ +static inline void +ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) +{ + int i; + + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, control.rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != + offsetof(struct ieee80211_tx_info, driver_rates)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8); + /* clear the rate counts */ + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + info->status.rates[i].count = 0; + + BUILD_BUG_ON( + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23); + memset(&info->status.ampdu_ack_len, 0, + sizeof(struct ieee80211_tx_info) - + offsetof(struct ieee80211_tx_info, status.ampdu_ack_len)); +} + /** * enum mac80211_rx_flags - receive flags @@ -875,8 +922,8 @@ enum ieee80211_hw_flags { * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. * - * @max_altrates: maximum number of alternate rate retry stages - * @max_altrate_tries: maximum number of tries for each stage + * @max_rates: maximum number of alternate rate retry stages + * @max_rate_tries: maximum number of tries for each stage */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -893,8 +940,8 @@ struct ieee80211_hw { u16 ampdu_queues; u16 max_listen_interval; s8 max_signal; - u8 max_altrates; - u8 max_altrate_tries; + u8 max_rates; + u8 max_rate_tries; }; /** @@ -933,9 +980,9 @@ static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) { - if (WARN_ON(c->tx_rate_idx < 0)) + if (WARN_ON(c->control.rates[0].idx < 0)) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx]; } static inline struct ieee80211_rate * @@ -951,9 +998,9 @@ static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c, int idx) { - if (c->control.retries[idx].rate_idx < 0) + if (c->control.rates[idx + 1].idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx]; } /** @@ -1847,17 +1894,30 @@ struct ieee80211_sta *ieee80211_find_sta /* Rate control API */ + /** - * struct rate_selection - rate information for/from rate control algorithms + * struct ieee80211_tx_rate_control - rate control information for/from RC algo * - * @rate_idx: selected transmission rate index - * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used - * @probe_idx: rate for probing (or -1) - * @max_rate_idx: maximum rate index that can be used, this is - * input to the algorithm and will be enforced - */ -struct rate_selection { - s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx; + * @hw: The hardware the algorithm is invoked for. + * @sband: The band this frame is being transmitted on. + * @bss_conf: the current BSS configuration + * @reported_rate: The rate control algorithm can fill this in to indicate + * which rate should be reported to userspace as the current rate and + * used for rate calculations in the mesh network. + * @rts: whether RTS will be used for this frame because it is longer than the + * RTS threshold + * @short_preamble: whether mac80211 will request short-preamble transmission + * if the selected rate supports it + * @max_rate_idx: user-requested maximum rate (not MCS for now) + */ +struct ieee80211_tx_rate_control { + struct ieee80211_hw *hw; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_conf *bss_conf; + struct sk_buff *skb; + struct ieee80211_tx_rate reported_rate; + bool rts, short_preamble; + u8 max_rate_idx; }; struct rate_control_ops { @@ -1876,10 +1936,8 @@ struct rate_control_ops { void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb); - void (*get_rate)(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel); + void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc); void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); --- everything.orig/net/mac80211/main.c 2008-10-14 16:37:23.000000000 +0200 +++ everything/net/mac80211/main.c 2008-10-14 16:39:10.000000000 +0200 @@ -41,6 +41,8 @@ */ struct ieee80211_tx_status_rtap_hdr { struct ieee80211_radiotap_header hdr; + u8 rate; + u8 padding_for_rate; __le16 tx_flags; u8 data_retries; } __attribute__ ((packed)); @@ -465,13 +467,28 @@ void ieee80211_tx_status(struct ieee8021 struct ieee80211_sub_if_data *sdata; struct net_device *prev_dev = NULL; struct sta_info *sta; + int retry_count = -1, i; + + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* the HW cannot have attempted that rate */ + if (i >= hw->max_rates) { + info->status.rates[i].idx = -1; + info->status.rates[i].count = 0; + } + + retry_count += info->status.rates[i].count; + } + if (retry_count < 0) + retry_count = 0; rcu_read_lock(); + sband = local->hw.wiphy->bands[info->band]; + sta = sta_info_get(local, hdr->addr1); if (sta) { - if (info->status.excessive_retries && + if (!(info->flags & IEEE80211_TX_STAT_ACK) && test_sta_flags(sta, WLAN_STA_PS)) { /* * The STA is in power save mode, so assume @@ -502,12 +519,11 @@ void ieee80211_tx_status(struct ieee8021 rcu_read_unlock(); return; } else { - if (info->status.excessive_retries) + if (!(info->flags & IEEE80211_TX_STAT_ACK)) sta->tx_retry_failed++; - sta->tx_retry_count += info->status.retry_count; + sta->tx_retry_count += retry_count; } - sband = local->hw.wiphy->bands[info->band]; rate_control_tx_status(local, sband, sta, skb); } @@ -528,9 +544,9 @@ void ieee80211_tx_status(struct ieee8021 local->dot11TransmittedFrameCount++; if (is_multicast_ether_addr(hdr->addr1)) local->dot11MulticastTransmittedFrameCount++; - if (info->status.retry_count > 0) + if (retry_count > 0) local->dot11RetryCount++; - if (info->status.retry_count > 1) + if (retry_count > 1) local->dot11MultipleRetryCount++; } @@ -574,19 +590,30 @@ void ieee80211_tx_status(struct ieee8021 rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); rthdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | - (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); + (1 << IEEE80211_RADIOTAP_DATA_RETRIES) | + (1 << IEEE80211_RADIOTAP_RATE)); if (!(info->flags & IEEE80211_TX_STAT_ACK) && !is_multicast_ether_addr(hdr->addr1)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) && - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + /* + * XXX: Once radiotap gets the bitmap reset thing the vendor + * extensions proposal contains, we can actually report + * the whole set of tries we did. + */ + if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); - else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); + if (info->status.rates[0].idx >= 0 && + !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) + rthdr->rate = sband->bitrates[ + info->status.rates[0].idx].bitrate / 5; - rthdr->data_retries = info->status.retry_count; + /* for now report the total retry_count */ + rthdr->data_retries = retry_count; /* XXX: is this sufficient for BPF? */ skb_set_mac_header(skb, 0); @@ -671,8 +698,9 @@ struct ieee80211_hw *ieee80211_alloc_hw( BUG_ON(!ops->configure_filter); local->ops = ops; - local->hw.queues = 1; /* default */ - + /* set up some defaults */ + local->hw.queues = 1; + local->hw.max_rates = 1; local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; local->hw.conf.long_frame_max_tx_count = 4; --- everything.orig/net/mac80211/tx.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/tx.c 2008-10-14 16:53:01.000000000 +0200 @@ -46,13 +46,20 @@ static __le16 ieee80211_duration(struct struct ieee80211_local *local = tx->local; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + + /* assume HW handles this */ + if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) + return 0; + + /* uh huh? */ + if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) + return 0; sband = local->hw.wiphy->bands[tx->channel->band]; - txrate = &sband->bitrates[tx->rate_idx]; + txrate = &sband->bitrates[info->control.rates[0].idx]; - erp = 0; - if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) - erp = txrate->flags & IEEE80211_RATE_ERP_G; + erp = txrate->flags & IEEE80211_RATE_ERP_G; /* * data and mgmt (except PS Poll): @@ -439,140 +446,154 @@ ieee80211_tx_h_select_key(struct ieee802 static ieee80211_tx_result debug_noinline ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) { - struct rate_selection rsel; - struct ieee80211_supported_band *sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + struct ieee80211_hdr *hdr = (void *)tx->skb->data; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, len; + bool inval = false, rts = false, short_preamble = false; + struct ieee80211_tx_rate_control txrc; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + memset(&txrc, 0, sizeof(txrc)); - if (likely(tx->rate_idx < 0)) { - rate_control_get_rate(tx->sdata, sband, tx->sta, - tx->skb, &rsel); - if (tx->sta) - tx->sta->last_txrate_idx = rsel.rate_idx; - tx->rate_idx = rsel.rate_idx; - if (unlikely(rsel.probe_idx >= 0)) { - info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - info->control.retries[0].rate_idx = tx->rate_idx; - info->control.retries[0].limit = tx->local->hw.max_altrate_tries; - tx->rate_idx = rsel.probe_idx; - } else if (info->control.retries[0].limit == 0) - info->control.retries[0].rate_idx = -1; + sband = tx->local->hw.wiphy->bands[tx->channel->band]; - if (unlikely(tx->rate_idx < 0)) - return TX_DROP; - } else - info->control.retries[0].rate_idx = -1; + len = min_t(int, tx->skb->len + FCS_LEN, + tx->local->fragmentation_threshold); - if (tx->sdata->vif.bss_conf.use_cts_prot && - (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) { - tx->last_frag_rate_idx = tx->rate_idx; - if (rsel.probe_idx >= 0) - tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG; - else - tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG; - tx->rate_idx = rsel.nonerp_idx; - info->tx_rate_idx = rsel.nonerp_idx; - info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } else { - tx->last_frag_rate_idx = tx->rate_idx; - info->tx_rate_idx = tx->rate_idx; + /* set up the tx rate control struct we give the RC algo */ + txrc.hw = local_to_hw(tx->local); + txrc.sband = sband; + txrc.bss_conf = &tx->sdata->vif.bss_conf; + txrc.skb = tx->skb; + txrc.reported_rate.idx = -1; + txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx; + + /* set up RTS protection if desired */ + if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD && + len > tx->local->rts_threshold) { + txrc.rts = rts = true; } - info->tx_rate_idx = tx->rate_idx; - return TX_CONTINUE; -} + /* + * Use short preamble if the BSS can handle it, but not for + * management frames unless we know the receiver can handle + * that -- the management frame might be to a station that + * just wants a probe response. + */ + if (tx->sdata->vif.bss_conf.use_short_preamble && + (ieee80211_is_data(hdr->frame_control) || + (tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) + txrc.short_preamble = short_preamble = true; -static ieee80211_tx_result debug_noinline -ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); - struct ieee80211_supported_band *sband; - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + rate_control_get_rate(tx->sdata, tx->sta, &txrc); + + if (unlikely(info->control.rates[0].idx < 0)) + return TX_DROP; + + if (txrc.reported_rate.idx < 0) + txrc.reported_rate = info->control.rates[0]; if (tx->sta) - info->control.sta = &tx->sta->sta; + tx->sta->last_tx_rate = txrc.reported_rate; - if (!info->control.retry_limit) { - if (!is_multicast_ether_addr(hdr->addr1)) { - int len = min_t(int, tx->skb->len + FCS_LEN, - tx->local->fragmentation_threshold); - if (len > tx->local->rts_threshold - && tx->local->rts_threshold < - IEEE80211_MAX_RTS_THRESHOLD) { - info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS; - info->flags |= - IEEE80211_TX_CTL_LONG_RETRY_LIMIT; - info->control.retry_limit = - tx->local->hw.conf.long_frame_max_tx_count - 1; - } else { - info->control.retry_limit = - tx->local->hw.conf.short_frame_max_tx_count - 1; - } - } else { - info->control.retry_limit = 1; - } - } + if (unlikely(!info->control.rates[0].count)) + info->control.rates[0].count = 1; - if (tx->flags & IEEE80211_TX_FRAGMENTED) { - /* Do not use multiple retry rates when sending fragmented - * frames. - * TODO: The last fragment could still use multiple retry - * rates. */ - info->control.retries[0].rate_idx = -1; - } - - /* Use CTS protection for unicast frames sent using extended rates if - * there are associated non-ERP stations and RTS/CTS is not configured - * for the frame. */ - if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) && - (tx->flags & IEEE80211_TX_UNICAST) && - tx->sdata->vif.bss_conf.use_cts_prot && - !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)) - info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT; - - /* Transmit data frames using short preambles if the driver supports - * short preambles at the selected rate and short preambles are - * available on the network at the current point in time. */ - if (ieee80211_is_data(hdr->frame_control) && - (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) && - tx->sdata->vif.bss_conf.use_short_preamble && - (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) { - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; - } - - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { - struct ieee80211_rate *rate; - s8 baserate = -1; - int idx; + if (is_multicast_ether_addr(hdr->addr1)) { + /* + * XXX: verify the rate is in the basic rateset + */ + return TX_CONTINUE; + } - /* Do not use multiple retry rates when using RTS/CTS */ - info->control.retries[0].rate_idx = -1; + /* + * set up the RTS/CTS rate as the fastest basic rate + * that is not faster than the data rate + * + * XXX: Should this check all retry rates? + */ + if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { + s8 baserate = 0; - /* Use min(data rate, max base rate) as CTS/RTS rate */ - rate = &sband->bitrates[tx->rate_idx]; + rate = &sband->bitrates[info->control.rates[0].idx]; - for (idx = 0; idx < sband->n_bitrates; idx++) { - if (sband->bitrates[idx].bitrate > rate->bitrate) + for (i = 0; i < sband->n_bitrates; i++) { + /* must be a basic rate */ + if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i))) continue; - if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) && - (baserate < 0 || - (sband->bitrates[baserate].bitrate - < sband->bitrates[idx].bitrate))) - baserate = idx; + /* must not be faster than the data rate */ + if (sband->bitrates[i].bitrate > rate->bitrate) + continue; + /* maximum */ + if (sband->bitrates[baserate].bitrate < + sband->bitrates[i].bitrate) + baserate = i; } - if (baserate >= 0) - info->control.rts_cts_rate_idx = baserate; - else - info->control.rts_cts_rate_idx = 0; + info->control.rts_cts_rate_idx = baserate; } + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + /* + * make sure there's no valid rate following + * an invalid one, just in case drivers don't + * take the API seriously to stop at -1. + */ + if (inval) { + info->control.rates[i].idx = -1; + continue; + } + if (info->control.rates[i].idx < 0) { + inval = true; + continue; + } + + /* + * For now assume MCS is already set up correctly, this + * needs to be fixed. + */ + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) { + WARN_ON(info->control.rates[i].idx > 76); + continue; + } + + /* set up RTS protection if desired */ + if (rts) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_RTS_CTS; + + /* RC is busted */ + if (WARN_ON(info->control.rates[i].idx >= + sband->n_bitrates)) { + info->control.rates[i].idx = -1; + continue; + } + + rate = &sband->bitrates[info->control.rates[i].idx]; + + /* set up short preamble */ + if (short_preamble && + rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_SHORT_PREAMBLE; + + /* set up G protection */ + if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && + rate->flags & IEEE80211_RATE_ERP_G) + info->control.rates[i].flags |= + IEEE80211_TX_RC_USE_CTS_PROTECT; + } + + return TX_CONTINUE; +} + +static ieee80211_tx_result debug_noinline +ieee80211_tx_h_misc(struct ieee80211_tx_data *tx) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); + if (tx->sta) info->control.sta = &tx->sta->sta; @@ -680,6 +701,7 @@ ieee80211_tx_h_fragment(struct ieee80211 left = payload_len - per_fragm; for (i = 0; i < num_fragm - 1; i++) { struct ieee80211_hdr *fhdr; + struct ieee80211_tx_info *info; size_t copylen; if (left <= 0) @@ -694,20 +716,45 @@ ieee80211_tx_h_fragment(struct ieee80211 IEEE80211_ENCRYPT_TAILROOM); if (!frag) goto fail; + /* Make sure that all fragments use the same priority so * that they end up using the same TX queue */ frag->priority = first->priority; + skb_reserve(frag, tx->local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); + + /* copy TX information */ + info = IEEE80211_SKB_CB(frag); + memcpy(info, first->cb, sizeof(frag->cb)); + + /* copy/fill in 802.11 header */ fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen); memcpy(fhdr, first->data, hdrlen); - if (i == num_fragm - 2) - fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG)); + + if (i == num_fragm - 2) { + /* clear MOREFRAGS bit for the last fragment */ + fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS); + } else { + /* + * No multi-rate retries for fragmented frames, that + * would completely throw off the NAV at other STAs. + */ + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); + info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; + } + + /* copy data */ copylen = left > per_fragm ? per_fragm : left; memcpy(skb_put(frag, copylen), pos, copylen); - memcpy(frag->cb, first->cb, sizeof(frag->cb)); + skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; @@ -767,12 +814,10 @@ ieee80211_tx_h_calculate_duration(struct tx->extra_frag[0]->len); for (i = 0; i < tx->num_extra_frag; i++) { - if (i + 1 < tx->num_extra_frag) { + if (i + 1 < tx->num_extra_frag) next_len = tx->extra_frag[i + 1]->len; - } else { + else next_len = 0; - tx->rate_idx = tx->last_frag_rate_idx; - } hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data; hdr->duration_id = ieee80211_duration(tx, 0, next_len); @@ -825,7 +870,6 @@ __ieee80211_parse_tx_radiotap(struct iee (struct ieee80211_radiotap_header *) skb->data; struct ieee80211_supported_band *sband; int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); sband = tx->local->hw.wiphy->bands[tx->channel->band]; @@ -839,8 +883,6 @@ __ieee80211_parse_tx_radiotap(struct iee */ while (!ret) { - int i, target_rate; - ret = ieee80211_radiotap_iterator_next(&iterator); if (ret) @@ -854,38 +896,6 @@ __ieee80211_parse_tx_radiotap(struct iee * get_unaligned((type *)iterator.this_arg) to dereference * iterator.this_arg for type "type" safely on all arches. */ - case IEEE80211_RADIOTAP_RATE: - /* - * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps - * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps - */ - target_rate = (*iterator.this_arg) * 5; - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *r; - - r = &sband->bitrates[i]; - - if (r->bitrate == target_rate) { - tx->rate_idx = i; - break; - } - } - break; - - case IEEE80211_RADIOTAP_ANTENNA: - /* - * radiotap uses 0 for 1st ant, mac80211 is 1 for - * 1st ant - */ - info->antenna_sel_tx = (*iterator.this_arg) + 1; - break; - -#if 0 - case IEEE80211_RADIOTAP_DBM_TX_POWER: - control->power_level = *iterator.this_arg; - break; -#endif - case IEEE80211_RADIOTAP_FLAGS: if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { /* @@ -951,8 +961,6 @@ __ieee80211_tx_prepare(struct ieee80211_ tx->local = local; tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev); tx->channel = local->hw.conf.channel; - tx->rate_idx = -1; - tx->last_frag_rate_idx = -1; /* * Set this flag (used below to indicate "automatic fragmentation"), * it will be cleared/left by radiotap as desired. @@ -1053,23 +1061,11 @@ static int __ieee80211_tx(struct ieee802 if (!tx->extra_frag[i]) continue; info = IEEE80211_SKB_CB(tx->extra_frag[i]); - info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT | - IEEE80211_TX_CTL_CLEAR_PS_FILT | + info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT); if (netif_subqueue_stopped(local->mdev, tx->extra_frag[i])) return IEEE80211_TX_FRAG_AGAIN; - if (i == tx->num_extra_frag) { - info->tx_rate_idx = tx->last_frag_rate_idx; - - if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG) - info->flags |= - IEEE80211_TX_CTL_RATE_CTRL_PROBE; - else - info->flags &= - ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } ret = local->ops->tx(local_to_hw(local), tx->extra_frag[i]); @@ -1206,9 +1202,6 @@ retry: store->skb = skb; store->extra_frag = tx.extra_frag; store->num_extra_frag = tx.num_extra_frag; - store->last_frag_rate_idx = tx.last_frag_rate_idx; - store->last_frag_rate_ctrl_probe = - !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG); } out: rcu_read_unlock(); @@ -1767,10 +1760,7 @@ void ieee80211_tx_pending(unsigned long store = &local->pending_packet[i]; tx.extra_frag = store->extra_frag; tx.num_extra_frag = store->num_extra_frag; - tx.last_frag_rate_idx = store->last_frag_rate_idx; tx.flags = 0; - if (store->last_frag_rate_ctrl_probe) - tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG; ret = __ieee80211_tx(local, store->skb, &tx); if (ret) { if (ret == IEEE80211_TX_FRAG_AGAIN) @@ -1858,7 +1848,6 @@ struct sk_buff *ieee80211_beacon_get(str struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_if_ap *ap = NULL; struct ieee80211_if_sta *ifsta = NULL; - struct rate_selection rsel; struct beacon_data *beacon; struct ieee80211_supported_band *sband; enum ieee80211_band band = local->hw.conf.channel->band; @@ -1962,32 +1951,23 @@ struct sk_buff *ieee80211_beacon_get(str skb->do_not_encrypt = 1; info->band = band; - rate_control_get_rate(sdata, sband, NULL, skb, &rsel); - - if (unlikely(rsel.rate_idx < 0)) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: ieee80211_beacon_get: " - "no rate found\n", - wiphy_name(local->hw.wiphy)); - } - dev_kfree_skb_any(skb); - skb = NULL; - goto out; - } + /* + * XXX: For now, always use the lowest rate + */ + info->control.rates[0].idx = 0; + info->control.rates[0].count = 1; + info->control.rates[1].idx = -1; + info->control.rates[2].idx = -1; + info->control.rates[3].idx = -1; + info->control.rates[4].idx = -1; + BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5); info->control.vif = vif; - info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; - if (sdata->vif.bss_conf.use_short_preamble && - sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) - info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE; - - info->control.retry_limit = 1; - -out: + out: rcu_read_unlock(); return skb; } --- everything.orig/net/mac80211/ieee80211_i.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/ieee80211_i.h 2008-10-14 16:52:40.000000000 +0200 @@ -142,7 +142,6 @@ typedef unsigned __bitwise__ ieee80211_t #define IEEE80211_TX_FRAGMENTED BIT(0) #define IEEE80211_TX_UNICAST BIT(1) #define IEEE80211_TX_PS_BUFFERED BIT(2) -#define IEEE80211_TX_PROBE_LAST_FRAG BIT(3) struct ieee80211_tx_data { struct sk_buff *skb; @@ -153,11 +152,6 @@ struct ieee80211_tx_data { struct ieee80211_key *key; struct ieee80211_channel *channel; - s8 rate_idx; - /* use this rate (if set) for last fragment; rate can - * be set to lower rate for the first fragments, e.g., - * when using CTS protection with IEEE 802.11g. */ - s8 last_frag_rate_idx; /* Extra fragments (in addition to the first fragment * in skb) */ @@ -203,9 +197,7 @@ struct ieee80211_rx_data { struct ieee80211_tx_stored_packet { struct sk_buff *skb; struct sk_buff **extra_frag; - s8 last_frag_rate_idx; int num_extra_frag; - bool last_frag_rate_ctrl_probe; }; struct beacon_data { --- everything.orig/net/mac80211/rate.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rate.c 2008-10-14 16:39:04.000000000 +0200 @@ -199,48 +199,44 @@ static void rate_control_release(struct } void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel) + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc) { struct rate_control_ref *ref = sdata->local->rate_ctrl; void *priv_sta = NULL; struct ieee80211_sta *ista = NULL; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); int i; - sel->rate_idx = -1; - sel->nonerp_idx = -1; - sel->probe_idx = -1; - sel->max_rate_idx = sdata->max_ratectrl_rateidx; - if (sta) { ista = &sta->sta; priv_sta = sta->rate_ctrl_priv; } + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + info->control.rates[i].idx = -1; + info->control.rates[i].flags = 0; + info->control.rates[i].count = 1; + } + if (sta && sdata->force_unicast_rateidx > -1) - sel->rate_idx = sdata->force_unicast_rateidx; + info->control.rates[0].idx = sdata->force_unicast_rateidx; else - ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel); + ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); - if (sdata->max_ratectrl_rateidx > -1 && - sel->rate_idx > sdata->max_ratectrl_rateidx) - sel->rate_idx = sdata->max_ratectrl_rateidx; - - BUG_ON(sel->rate_idx < 0); - - /* Select a non-ERP backup rate. */ - if (sel->nonerp_idx < 0) { - for (i = 0; i < sband->n_bitrates; i++) { - struct ieee80211_rate *rate = &sband->bitrates[i]; - if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate) - break; - - if (rate_supported(ista, sband->band, i) && - !(rate->flags & IEEE80211_RATE_ERP_G)) - sel->nonerp_idx = i; - } + /* + * try to enforce the maximum rate the user wanted + */ + if (sdata->max_ratectrl_rateidx > -1) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) + continue; + info->control.rates[i].idx = + min_t(s8, info->control.rates[i].idx, + sdata->max_ratectrl_rateidx); } + + BUG_ON(info->control.rates[0].idx < 0); } struct rate_control_ref *rate_control_get(struct rate_control_ref *ref) --- everything.orig/net/mac80211/rate.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rate.h 2008-10-14 16:39:04.000000000 +0200 @@ -31,9 +31,8 @@ struct rate_control_ref { struct rate_control_ref *rate_control_alloc(const char *name, struct ieee80211_local *local); void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct sta_info *sta, struct sk_buff *skb, - struct rate_selection *sel); + struct sta_info *sta, + struct ieee80211_tx_rate_control *txrc); struct rate_control_ref *rate_control_get(struct rate_control_ref *ref); void rate_control_put(struct rate_control_ref *ref); --- everything.orig/net/mac80211/sta_info.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/sta_info.h 2008-10-14 16:39:04.000000000 +0200 @@ -196,7 +196,7 @@ struct sta_ampdu_mlme { * @tx_packets: number of RX/TX MSDUs * @tx_bytes: TBD * @tx_fragments: number of transmitted MPDUs - * @last_txrate_idx: Index of the last used transmit rate + * @last_txrate: description of the last used transmit rate * @tid_seq: TBD * @ampdu_mlme: TBD * @timer_to_tid: identity mapping to ID timers @@ -267,7 +267,7 @@ struct sta_info { unsigned long tx_packets; unsigned long tx_bytes; unsigned long tx_fragments; - unsigned int last_txrate_idx; + struct ieee80211_tx_rate last_tx_rate; u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; /* --- everything.orig/net/mac80211/wext.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/wext.c 2008-10-14 16:39:09.000000000 +0200 @@ -636,8 +636,8 @@ static int ieee80211_ioctl_giwrate(struc sta = sta_info_get(local, sdata->u.sta.bssid); - if (sta && sta->last_txrate_idx < sband->n_bitrates) - rate->value = sband->bitrates[sta->last_txrate_idx].bitrate; + if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) + rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate; else rate->value = 0; --- everything.orig/net/mac80211/mesh_hwmp.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/mesh_hwmp.c 2008-10-14 16:39:04.000000000 +0200 @@ -218,12 +218,16 @@ static u32 airtime_link_metric_get(struc if (sta->fail_avg >= 100) return MAX_METRIC; + + if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS) + return MAX_METRIC; + err = (sta->fail_avg << ARITH_SHIFT) / 100; /* bitrate is in units of 100 Kbps, while we need rate in units of * 1Mbps. This will be corrected on tx_time computation. */ - rate = sband->bitrates[sta->last_txrate_idx].bitrate; + rate = sband->bitrates[sta->last_tx_rate.idx].bitrate; tx_time = (device_constant + 10 * test_frame_len / rate); estimated_retx = ((1 << (2 * ARITH_SHIFT)) / (s_unit - err)); result = (tx_time * estimated_retx) >> (2 * ARITH_SHIFT) ; --- everything.orig/net/mac80211/rc80211_pid_algo.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rc80211_pid_algo.c 2008-10-14 16:39:04.000000000 +0200 @@ -241,7 +241,7 @@ static void rate_control_pid_tx_status(v /* Ignore all frames that were sent with a different rate than the rate * we currently advise mac80211 to use. */ - if (info->tx_rate_idx != spinfo->txrate_idx) + if (info->status.rates[0].idx != spinfo->txrate_idx) return; spinfo->tx_num_xmit++; @@ -253,10 +253,10 @@ static void rate_control_pid_tx_status(v /* We count frames that totally failed to be transmitted as two bad * frames, those that made it out but had some retries as one good and * one bad frame. */ - if (info->status.excessive_retries) { + if (!(info->flags & IEEE80211_TX_STAT_ACK)) { spinfo->tx_num_failed += 2; spinfo->tx_num_xmit++; - } else if (info->status.retry_count) { + } else if (info->status.rates[0].count) { spinfo->tx_num_failed++; spinfo->tx_num_xmit++; } @@ -270,23 +270,32 @@ static void rate_control_pid_tx_status(v } static void -rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, - struct rate_selection *sel) +rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct rc_pid_sta_info *spinfo = priv_sta; int rateidx; u16 fc; + if (txrc->rts) + info->control.rates[0].count = + txrc->hw->conf.long_frame_max_tx_count; + else + info->control.rates[0].count = + txrc->hw->conf.short_frame_max_tx_count; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); if (!sta || !spinfo || (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || is_multicast_ether_addr(hdr->addr1)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -295,7 +304,7 @@ rate_control_pid_get_rate(void *priv, st if (rateidx >= sband->n_bitrates) rateidx = sband->n_bitrates - 1; - sel->rate_idx = rateidx; + info->control.rates[0].idx = rateidx; #ifdef CONFIG_MAC80211_DEBUGFS rate_control_pid_event_tx_rate(&spinfo->events, --- everything.orig/net/mac80211/rc80211_minstrel.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rc80211_minstrel.c 2008-10-14 16:39:04.000000000 +0200 @@ -169,30 +169,20 @@ minstrel_tx_status(void *priv, struct ie { struct minstrel_sta_info *mi = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_altrate *ar = info->status.retries; - struct minstrel_priv *mp = priv; - int i, ndx, tries; - int success = 0; + struct ieee80211_tx_rate *ar = info->status.rates; + int i, ndx; + int success; - if (!info->status.excessive_retries) - success = 1; + success = !!(info->flags & IEEE80211_TX_STAT_ACK); - if (!mp->has_mrr || (ar[0].rate_idx < 0)) { - ndx = rix_to_ndx(mi, info->tx_rate_idx); - tries = info->status.retry_count + 1; - mi->r[ndx].success += success; - mi->r[ndx].attempts += tries; - return; - } - - for (i = 0; i < 4; i++) { - if (ar[i].rate_idx < 0) + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + if (ar[i].idx < 0) break; - ndx = rix_to_ndx(mi, ar[i].rate_idx); - mi->r[ndx].attempts += ar[i].limit + 1; + ndx = rix_to_ndx(mi, ar[i].idx); + mi->r[ndx].attempts += ar[i].count; - if ((i != 3) && (ar[i + 1].rate_idx < 0)) + if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0)) mi->r[ndx].success += success; } @@ -210,9 +200,9 @@ minstrel_get_retry_count(struct minstrel { unsigned int retry = mr->adjusted_retry_count; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) retry = max(2U, min(mr->retry_count_rtscts, retry)); - else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) retry = max(2U, min(mr->retry_count_cts, retry)); return retry; } @@ -234,14 +224,15 @@ minstrel_get_next_sample(struct minstrel } void -minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +minstrel_get_rate(void *priv, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct minstrel_sta_info *mi = priv_sta; struct minstrel_priv *mp = priv; - struct ieee80211_tx_altrate *ar = info->control.retries; + struct ieee80211_tx_rate *ar = info->control.rates; unsigned int ndx, sample_ndx = 0; bool mrr; bool sample_slower = false; @@ -251,16 +242,12 @@ minstrel_get_rate(void *priv, struct iee int sample_rate; if (!sta || !mi || use_low_rate(skb)) { - sel->rate_idx = rate_lowest_index(sband, sta); + ar[0].idx = rate_lowest_index(sband, sta); + ar[0].count = mp->max_retry; return; } - mrr = mp->has_mrr; - - /* mac80211 does not allow mrr for RTS/CTS */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) - mrr = false; + mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot; if (time_after(jiffies, mi->stats_update + (mp->update_interval * HZ) / 1000)) @@ -315,13 +302,12 @@ minstrel_get_rate(void *priv, struct iee mi->sample_deferred++; } } - sel->rate_idx = mi->r[ndx].rix; - info->control.retry_limit = minstrel_get_retry_count(&mi->r[ndx], info); + ar[0].idx = mi->r[ndx].rix; + ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info); if (!mrr) { - ar[0].rate_idx = mi->lowest_rix; - ar[0].limit = mp->max_retry; - ar[1].rate_idx = -1; + ar[1].idx = mi->lowest_rix; + ar[1].count = mp->max_retry; return; } @@ -336,9 +322,9 @@ minstrel_get_rate(void *priv, struct iee } mrr_ndx[1] = mi->max_prob_rate; mrr_ndx[2] = 0; - for (i = 0; i < 3; i++) { - ar[i].rate_idx = mi->r[mrr_ndx[i]].rix; - ar[i].limit = mi->r[mrr_ndx[i]].adjusted_retry_count; + for (i = 1; i < 4; i++) { + ar[i].idx = mi->r[mrr_ndx[i - 1]].rix; + ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count; } } @@ -532,13 +518,13 @@ minstrel_alloc(struct ieee80211_hw *hw, /* maximum time that the hw is allowed to stay in one MRR segment */ mp->segment_size = 6000; - if (hw->max_altrate_tries > 0) - mp->max_retry = hw->max_altrate_tries; + if (hw->max_rate_tries > 0) + mp->max_retry = hw->max_rate_tries; else /* safe default, does not necessarily have to match hw properties */ mp->max_retry = 7; - if (hw->max_altrates >= 3) + if (hw->max_rates >= 4) mp->has_mrr = true; mp->hw = hw; --- everything.orig/net/mac80211/rc80211_pid_debugfs.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rc80211_pid_debugfs.c 2008-10-14 16:39:04.000000000 +0200 @@ -43,6 +43,7 @@ void rate_control_pid_event_tx_status(st { union rc_pid_event_data evd; + evd.flags = stat->flags; memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info)); rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd); } @@ -167,8 +168,8 @@ static ssize_t rate_control_pid_events_r switch (ev->type) { case RC_PID_EVENT_TYPE_TX_STATUS: p += snprintf(pb + p, length - p, "tx_status %u %u", - ev->data.tx_status.status.excessive_retries, - ev->data.tx_status.status.retry_count); + !(ev->data.flags & IEEE80211_TX_STAT_ACK), + ev->data.tx_status.status.rates[0].idx); break; case RC_PID_EVENT_TYPE_RATE_CHANGE: p += snprintf(pb + p, length - p, "rate_change %d %d", --- everything.orig/net/mac80211/rc80211_pid.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/net/mac80211/rc80211_pid.h 2008-10-14 16:39:04.000000000 +0200 @@ -61,6 +61,7 @@ enum rc_pid_event_type { union rc_pid_event_data { /* RC_PID_EVENT_TX_STATUS */ struct { + u32 flags; struct ieee80211_tx_info tx_status; }; /* RC_PID_EVENT_TYPE_RATE_CHANGE */ --- everything.orig/drivers/net/wireless/zd1211rw/zd_mac.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/zd1211rw/zd_mac.c 2008-10-14 16:39:04.000000000 +0200 @@ -296,15 +296,14 @@ static void zd_op_stop(struct ieee80211_ * If no status information has been requested, the skb is freed. */ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, - u32 flags, int ackssi, bool success) + int ackssi, bool success) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!success) - info->status.excessive_retries = 1; - info->flags |= flags; + if (success) + info->flags |= IEEE80211_TX_STAT_ACK; info->status.ack_signal = ackssi; ieee80211_tx_status_irqsafe(hw, skb); } @@ -326,7 +325,7 @@ void zd_mac_tx_failed(struct ieee80211_h if (skb == NULL) return; - tx_status(hw, skb, 0, 0, 0); + tx_status(hw, skb, 0, 0); } /** @@ -342,12 +341,12 @@ void zd_mac_tx_failed(struct ieee80211_h void zd_mac_tx_to_dev(struct sk_buff *skb, int error) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; skb_pull(skb, sizeof(struct zd_ctrlset)); if (unlikely(error || (info->flags & IEEE80211_TX_CTL_NO_ACK))) { - tx_status(hw, skb, 0, 0, !error); + tx_status(hw, skb, 0, !error); } else { struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue; @@ -406,7 +405,8 @@ static int zd_calc_tx_length_us(u8 *serv } static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, - struct ieee80211_hdr *header, u32 flags) + struct ieee80211_hdr *header, + struct ieee80211_tx_info *info) { /* * CONTROL TODO: @@ -417,7 +417,7 @@ static void cs_set_control(struct zd_mac cs->control = 0; /* First fragment */ - if (flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; /* Multicast */ @@ -428,10 +428,10 @@ static void cs_set_control(struct zd_mac if (ieee80211_is_pspoll(header->frame_control)) cs->control |= ZD_CS_PS_POLL_FRAME; - if (flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) cs->control |= ZD_CS_RTS; - if (flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) cs->control |= ZD_CS_SELF_CTS; /* FIXME: Management frame? */ @@ -517,12 +517,12 @@ static int fill_ctrlset(struct zd_mac *m txrate = ieee80211_get_tx_rate(mac->hw, info); cs->modulation = txrate->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) cs->modulation = txrate->hw_value_short; cs->tx_length = cpu_to_le16(frag_len); - cs_set_control(mac, cs, hdr, info->flags); + cs_set_control(mac, cs, hdr, info); packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; ZD_ASSERT(packet_length <= 0xffff); @@ -577,7 +577,7 @@ static int zd_op_tx(struct ieee80211_hw if (r) return r; - info->driver_data[0] = hw; + info->rate_driver_data[0] = hw; r = zd_usb_tx(&mac->chip.usb, skb); if (r) @@ -618,7 +618,7 @@ static int filter_ack(struct ieee80211_h if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) { __skb_unlink(skb, q); - tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); + tx_status(hw, skb, stats->signal, 1); goto out; } } --- everything.orig/drivers/net/wireless/rt2x00/rt2x00dev.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/rt2x00/rt2x00dev.c 2008-10-14 16:39:04.000000000 +0200 @@ -498,7 +498,9 @@ void rt2x00lib_txdone(struct queue_entry { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + u8 rate_idx, rate_flags; /* * Unmap the skb. @@ -528,14 +530,18 @@ void rt2x00lib_txdone(struct queue_entry rt2x00dev->link.qual.tx_failed += test_bit(TXDONE_FAILURE, &txdesc->flags); + rate_idx = skbdesc->tx_rate_idx; + rate_flags = skbdesc->tx_rate_flags; + /* * Initialize TX status */ memset(&tx_info->status, 0, sizeof(tx_info->status)); tx_info->status.ack_signal = 0; - tx_info->status.excessive_retries = - test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags); - tx_info->status.retry_count = txdesc->retry; + tx_info->status.rates[0].idx = rate_idx; + tx_info->status.rates[0].flags = rate_flags; + tx_info->status.rates[0].count = txdesc->retry + 1; + tx_info->status.rates[1].idx = -1; /* terminate */ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) @@ -544,7 +550,7 @@ void rt2x00lib_txdone(struct queue_entry rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) --- everything.orig/drivers/net/wireless/rt2x00/rt2x00mac.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/rt2x00/rt2x00mac.c 2008-10-14 16:39:04.000000000 +0200 @@ -39,7 +39,7 @@ static int rt2x00mac_tx_rts_cts(struct r unsigned int data_length; int retval = 0; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) data_length = sizeof(struct ieee80211_cts); else data_length = sizeof(struct ieee80211_rts); @@ -64,11 +64,11 @@ static int rt2x00mac_tx_rts_cts(struct r */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; - rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS; + rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; else rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; @@ -84,7 +84,7 @@ static int rt2x00mac_tx_rts_cts(struct r data_length += rt2x00crypto_tx_overhead(tx_info); #endif /* CONFIG_RT2X00_LIB_CRYPTO */ - if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, frag_skb->data, data_length, tx_info, (struct ieee80211_cts *)(skb->data)); @@ -146,8 +146,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | - IEEE80211_TX_CTL_USE_CTS_PROTECT)) && + if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | + IEEE80211_TX_RC_USE_CTS_PROTECT)) && !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) goto exit_fail; --- everything.orig/drivers/net/wireless/rt2x00/rt2x00queue.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/rt2x00/rt2x00queue.c 2008-10-14 16:39:04.000000000 +0200 @@ -230,8 +230,15 @@ static void rt2x00queue_create_tx_descri /* * Determine retry information. */ - txdesc->retry_limit = tx_info->control.retry_limit; - if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + txdesc->retry_limit = tx_info->control.rates[0].count - 1; + /* + * XXX: If at this point we knew whether the HW is going to use + * the RETRY_MODE bit or the retry_limit (currently all + * use the RETRY_MODE bit) we could do something like b43 + * does, set the RETRY_MODE bit when the RC algorithm is + * requesting more than the long retry limit. + */ + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); /* @@ -371,10 +378,12 @@ static void rt2x00queue_write_tx_descrip int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info; struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); struct txentry_desc txdesc; struct skb_frame_desc *skbdesc; unsigned int iv_len; + u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) return -EINVAL; @@ -396,13 +405,18 @@ int rt2x00queue_write_tx_frame(struct da rt2x00queue_create_tx_descriptor(entry, &txdesc); /* - * All information is retreived from the skb->cb array, + * All information is retrieved from the skb->cb array, * now we should claim ownership of the driver part of that - * array. + * array, preserving the bitrate index and flags. */ + tx_info = IEEE80211_SKB_CB(skb); + rate_idx = tx_info->control.rates[0].idx; + rate_flags = tx_info->control.rates[0].flags; skbdesc = get_skb_frame_desc(entry->skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; + skbdesc->tx_rate_idx = rate_idx; + skbdesc->tx_rate_flags = rate_flags; /* * When hardware encryption is supported, and this frame --- everything.orig/drivers/net/wireless/adm8211.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/adm8211.c 2008-10-14 16:39:04.000000000 +0200 @@ -341,15 +341,14 @@ static void adm8211_interrupt_tci(struct pci_unmap_single(priv->pdev, info->mapping, info->skb->len, PCI_DMA_TODEVICE); - memset(&txi->status, 0, sizeof(txi->status)); + ieee80211_tx_info_clear_status(txi); + skb_pull(skb, sizeof(struct adm8211_tx_hdr)); memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (status & TDES0_STATUS_ES) - txi->status.excessive_retries = 1; - else - txi->flags |= IEEE80211_TX_STAT_ACK; - } + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && + !(status & TDES0_STATUS_ES)) + txi->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(dev, skb); info->skb = NULL; @@ -1691,8 +1690,10 @@ static int adm8211_tx(struct ieee80211_h struct ieee80211_hdr *hdr; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info); + u8 rc_flags; - short_preamble = !!(txrate->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE); + rc_flags = info->control.rates[0].flags; + short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE); plcp_signal = txrate->bitrate; hdr = (struct ieee80211_hdr *)skb->data; @@ -1724,10 +1725,10 @@ static int adm8211_tx(struct ieee80211_h if (short_preamble) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); - txhdr->retry_limit = info->control.retry_limit; + txhdr->retry_limit = info->control.rates[0].count; adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); --- everything.orig/drivers/net/wireless/ath5k/base.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/ath5k/base.c 2008-10-14 16:39:04.000000000 +0200 @@ -542,8 +542,8 @@ ath5k_pci_probe(struct pci_dev *pdev, /* set up multi-rate retry capabilities */ if (sc->ah->ah_version == AR5K_AR5212) { - hw->max_altrates = 3; - hw->max_altrate_tries = 11; + hw->max_rates = 4; + hw->max_rate_tries = 11; } /* Finish private driver data initialization */ @@ -1201,7 +1201,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL, (sc->power_level * 2), ieee80211_get_tx_rate(sc->hw, info)->hw_value, - info->control.retry_limit, keyidx, 0, flags, 0, 0); + info->control.rates[0].count, keyidx, 0, flags, 0, 0); if (ret) goto err_unmap; @@ -1213,7 +1213,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc break; mrr_rate[i] = rate->hw_value; - mrr_tries[i] = info->control.retries[i].limit; + mrr_tries[i] = info->control.rates[i + 1].count; } ah->ah_setup_mrr_tx_desc(ah, ds, @@ -1859,30 +1859,26 @@ ath5k_tx_processq(struct ath5k_softc *sc pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE); - memset(&info->status, 0, sizeof(info->status)); - info->tx_rate_idx = ath5k_hw_to_driver_rix(sc, - ts.ts_rate[ts.ts_final_idx]); - info->status.retry_count = ts.ts_longretry; - + ieee80211_tx_info_clear_status(info); for (i = 0; i < 4; i++) { - struct ieee80211_tx_altrate *r = - &info->status.retries[i]; + struct ieee80211_tx_rate *r = + &info->status.rates[i]; if (ts.ts_rate[i]) { - r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); - r->limit = ts.ts_retry[i]; + r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]); + r->count = ts.ts_retry[i]; } else { - r->rate_idx = -1; - r->limit = 0; + r->idx = -1; + r->count = 0; } } - info->status.excessive_retries = 0; + /* count the successful attempt as well */ + info->status.rates[ts.ts_final_idx].count++; + if (unlikely(ts.ts_status)) { sc->ll_stats.dot11ACKFailureCount++; - if (ts.ts_status & AR5K_TXERR_XRETRY) - info->status.excessive_retries = 1; - else if (ts.ts_status & AR5K_TXERR_FILT) + if (ts.ts_status & AR5K_TXERR_FILT) info->flags |= IEEE80211_TX_STAT_TX_FILTERED; } else { info->flags |= IEEE80211_TX_STAT_ACK; --- everything.orig/drivers/net/wireless/ath9k/main.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/ath9k/main.c 2008-10-14 16:52:41.000000000 +0200 @@ -461,12 +461,13 @@ void ath_tx_complete(struct ath_softc *s DPRINTF(sc, ATH_DBG_XMIT, "%s: TX complete: skb: %p\n", __func__, skb); + ieee80211_tx_info_clear_status(tx_info); if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; + /* free driver's private data area of tx_info, XXX: HACK! */ + if (tx_info->control.vif != NULL) + kfree(tx_info->control.vif); + tx_info->control.vif = NULL; } if (tx_status->flags & ATH_TX_BAR) { @@ -474,17 +475,12 @@ void ath_tx_complete(struct ath_softc *s tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { + if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; } - tx_info->status.retry_count = tx_status->retries; + tx_info->status.rates[0].count = tx_status->retries + 1; ieee80211_tx_status(hw, skb); if (an) --- everything.orig/drivers/net/wireless/ath9k/rc.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/ath9k/rc.c 2008-10-14 16:52:41.000000000 +0200 @@ -1864,24 +1864,21 @@ static void ath_tx_status(void *priv, st hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: UGLY HACK!! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; spin_lock_bh(&sc->node_lock); an = ath_node_find(sc, hdr->addr1); spin_unlock_bh(&sc->node_lock); - if (!an || !priv_sta || !ieee80211_is_data(fc)) { - if (tx_info->driver_data[0] != NULL) { - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + if (tx_info_priv == NULL) return; - } - if (tx_info->driver_data[0] != NULL) { + + if (an && priv_sta && ieee80211_is_data(fc)) ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv); - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; - } + + kfree(tx_info_priv); + tx_info->control.vif = NULL; } static void ath_tx_aggr_resp(struct ath_softc *sc, @@ -1927,10 +1924,11 @@ static void ath_tx_aggr_resp(struct ath_ } } -static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; @@ -1946,17 +1944,17 @@ static void ath_get_rate(void *priv, str DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - /* allocate driver private area of tx_info */ - tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); - ASSERT(tx_info->driver_data[0] != NULL); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* allocate driver private area of tx_info, XXX: UGLY HACK! */ + tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; + ASSERT(tx_info_priv != NULL); lowest_idx = rate_lowest_index(sband, sta); tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate_idx = lowest_idx; + tx_info->control.rates[0].idx = lowest_idx; return; } @@ -1967,8 +1965,10 @@ static void ath_get_rate(void *priv, str tx_info_priv->rcs, &is_probe, false); +#if 0 if (is_probe) sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate; +#endif /* Ratecontrol sometimes returns invalid rate index */ if (tx_info_priv->rcs[0].rix != 0xff) @@ -1976,7 +1976,7 @@ static void ath_get_rate(void *priv, str else tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix; - sel->rate_idx = tx_info_priv->rcs[0].rix; + tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix; /* Check if aggregation has to be enabled for this tid */ --- everything.orig/drivers/net/wireless/ath9k/xmit.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/ath9k/xmit.c 2008-10-14 16:52:41.000000000 +0200 @@ -168,7 +168,9 @@ static void fill_min_rates(struct sk_buf hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { txctl->use_minrate = 1; @@ -288,13 +290,16 @@ static int ath_tx_prepare(struct ath_sof if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) txctl->flags |= ATH9K_TXDESC_NOACK; - if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + + if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; if (ieee80211_is_data(fc) && !txctl->use_minrate) { @@ -854,7 +859,9 @@ static int ath_tx_send_normal(struct ath skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* update starting sequence number for subsequent ADDBA request */ @@ -1248,8 +1255,9 @@ static int ath_tx_processq(struct ath_so } skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && @@ -1430,7 +1438,8 @@ static int ath_tx_send_ampdu(struct ath_ skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); /* Add sub-frame to BAW */ @@ -1464,7 +1473,7 @@ static u32 ath_lookup_rate(struct ath_so skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); tx_info_priv = (struct ath_tx_info_priv *) - tx_info->driver_data[0]; + tx_info->control.vif; /* XXX: HACK! */ memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); @@ -1924,7 +1933,8 @@ static int ath_tx_start_dma(struct ath_s bf->bf_flags = txctl->flags; bf->bf_keytype = txctl->keytype; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0]; + /* XXX: HACK! */ + tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; rcs = tx_info_priv->rcs; bf->bf_rcs[0] = rcs[0]; bf->bf_rcs[1] = rcs[1]; --- everything.orig/drivers/net/wireless/b43/dma.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43/dma.c 2008-10-14 16:39:04.000000000 +0200 @@ -1387,13 +1387,11 @@ void b43_dma_handle_txstatus(struct b43_ info = IEEE80211_SKB_CB(meta->skb); - memset(&info->status, 0, sizeof(info->status)); - /* * Call back to inform the ieee80211 subsystem about * the status of the transmission. */ - frame_succeed = b43_fill_txstatus_report(info, status); + frame_succeed = b43_fill_txstatus_report(dev, info, status); #ifdef CONFIG_B43_DEBUG if (frame_succeed) ring->nr_succeed_tx_packets++; --- everything.orig/drivers/net/wireless/b43/main.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43/main.c 2008-10-14 16:39:04.000000000 +0200 @@ -4563,7 +4563,7 @@ static int b43_wireless_init(struct ssb_ BIT(NL80211_IFTYPE_ADHOC); hw->queues = b43_modparam_qos ? 4 : 1; - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); --- everything.orig/drivers/net/wireless/b43/pio.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43/pio.c 2008-10-14 16:39:04.000000000 +0200 @@ -587,9 +587,8 @@ void b43_pio_handle_txstatus(struct b43_ spin_lock(&q->lock); /* IRQs are already disabled. */ info = IEEE80211_SKB_CB(pack->skb); - memset(&info->status, 0, sizeof(info->status)); - b43_fill_txstatus_report(info, status); + b43_fill_txstatus_report(dev, info, status); total_len = pack->skb->len + b43_txhdr_size(dev); total_len = roundup(total_len, 4); --- everything.orig/drivers/net/wireless/b43/xmit.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43/xmit.c 2008-10-14 16:39:04.000000000 +0200 @@ -185,7 +185,7 @@ int b43_generate_txhdr(struct b43_wldev u8 *_txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr; @@ -202,6 +202,7 @@ int b43_generate_txhdr(struct b43_wldev u16 phy_ctl = 0; u8 extra_ft = 0; struct ieee80211_rate *txrate; + struct ieee80211_tx_rate *rates; memset(txhdr, 0, sizeof(*txhdr)); @@ -291,7 +292,7 @@ int b43_generate_txhdr(struct b43_wldev phy_ctl |= B43_TXH_PHY_ENC_OFDM; else phy_ctl |= B43_TXH_PHY_ENC_CCK; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43_TXH_PHY_SHORTPRMBL; switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) { @@ -314,6 +315,7 @@ int b43_generate_txhdr(struct b43_wldev B43_WARN_ON(1); } + rates = info->control.rates; /* MAC control */ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43_TXH_MAC_ACK; @@ -324,12 +326,22 @@ int b43_generate_txhdr(struct b43_wldev mac_ctl |= B43_TXH_MAC_STMSDU; if (phy->type == B43_PHYTYPE_A) mac_ctl |= B43_TXH_MAC_5GHZ; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43_TXH_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate, rts_rate_fb; @@ -344,7 +356,7 @@ int b43_generate_txhdr(struct b43_wldev rts_rate_fb = b43_calc_fallback_rate(rts_rate); rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb); - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { struct ieee80211_cts *cts; if (b43_is_old_txhdr_format(dev)) { @@ -687,10 +699,18 @@ void b43_handle_txstatus(struct b43_wlde /* Fill out the mac80211 TXstatus report based on the b43-specific * txstatus report data. This returns a boolean whether the frame was * successfully transmitted. */ -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status) { bool frame_success = 1; + int retry_limit; + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = report->status.rates[0].count; + ieee80211_tx_info_clear_status(report); if (status->acked) { /* The frame was ACKed. */ @@ -700,14 +720,32 @@ bool b43_fill_txstatus_report(struct iee if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) { /* ...but we expected an ACK. */ frame_success = 0; - report->status.excessive_retries = 1; } } if (status->frame_count == 0) { /* The frame was not transmitted at all. */ - report->status.retry_count = 0; - } else - report->status.retry_count = status->frame_count - 1; + report->status.rates[0].count = 0; + } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + report->status.rates[0].count = 0; + report->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + report->status.rates[0].count = retry_limit; + report->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + report->status.rates[0].count = status->frame_count; + report->status.rates[1].idx = -1; + } + } return frame_success; } --- everything.orig/drivers/net/wireless/b43/xmit.h 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43/xmit.h 2008-10-14 16:39:04.000000000 +0200 @@ -178,7 +178,7 @@ int b43_generate_txhdr(struct b43_wldev u8 * txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *txctl, u16 cookie); + struct ieee80211_tx_info *txctl, u16 cookie); /* Transmit Status */ struct b43_txstatus { @@ -294,7 +294,8 @@ void b43_rx(struct b43_wldev *dev, struc void b43_handle_txstatus(struct b43_wldev *dev, const struct b43_txstatus *status); -bool b43_fill_txstatus_report(struct ieee80211_tx_info *report, +bool b43_fill_txstatus_report(struct b43_wldev *dev, + struct ieee80211_tx_info *report, const struct b43_txstatus *status); void b43_tx_suspend(struct b43_wldev *dev); --- everything.orig/drivers/net/wireless/b43legacy/dma.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/b43legacy/dma.c 2008-10-14 16:39:04.000000000 +0200 @@ -1411,6 +1411,7 @@ void b43legacy_dma_handle_txstatus(struc struct b43legacy_dmaring *ring; struct b43legacy_dmadesc_generic *desc; struct b43legacy_dmadesc_meta *meta; + int retry_limit; int slot; ring = parse_cookie(dev, status->cookie, &slot); @@ -1437,25 +1438,42 @@ void b43legacy_dma_handle_txstatus(struc struct ieee80211_tx_info *info; BUG_ON(!meta->skb); info = IEEE80211_SKB_CB(meta->skb); - /* Call back to inform the ieee80211 subsystem about the - * status of the transmission. - * Some fields of txstat are already filled in dma_tx(). - */ - memset(&info->status, 0, sizeof(info->status)); + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); - if (status->acked) { + if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; } else { - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) - info->status.excessive_retries = 1; + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } } - if (status->frame_count == 0) { - /* The frame was not transmitted at all. */ - info->status.retry_count = 0; - } else - info->status.retry_count = status->frame_count - - 1; + + /* Call back to inform the ieee80211 subsystem about the + * status of the transmission. + * Some fields of txstat are already filled in dma_tx(). + */ ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb); /* skb is freed by ieee80211_tx_status_irqsafe() */ meta->skb = NULL; --- everything.orig/drivers/net/wireless/b43legacy/main.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/b43legacy/main.c 2008-10-14 16:39:04.000000000 +0200 @@ -3691,7 +3691,7 @@ static int b43legacy_wireless_init(struc BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_ADHOC); hw->queues = 1; /* FIXME: hardware has more queues */ - hw->max_altrates = 1; + hw->max_rates = 2; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); --- everything.orig/drivers/net/wireless/b43legacy/pio.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43legacy/pio.c 2008-10-14 16:39:04.000000000 +0200 @@ -491,6 +491,7 @@ void b43legacy_pio_handle_txstatus(struc struct b43legacy_pioqueue *queue; struct b43legacy_pio_txpacket *packet; struct ieee80211_tx_info *info; + int retry_limit; queue = parse_cookie(dev, status->cookie, &packet); B43legacy_WARN_ON(!queue); @@ -503,11 +504,37 @@ void b43legacy_pio_handle_txstatus(struc sizeof(struct b43legacy_txhdr_fw3)); info = IEEE80211_SKB_CB(packet->skb); - memset(&info->status, 0, sizeof(info->status)); + + /* preserve the confiured retry limit before clearing the status + * The xmit function has overwritten the rc's value with the actual + * retry limit done by the hardware */ + retry_limit = info->status.rates[0].count; + ieee80211_tx_info_clear_status(info); if (status->acked) info->flags |= IEEE80211_TX_STAT_ACK; - info->status.retry_count = status->frame_count - 1; + + if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) { + /* + * If the short retries (RTS, not data frame) have exceeded + * the limit, the hw will not have tried the selected rate, + * but will have used the fallback rate instead. + * Don't let the rate control count attempts for the selected + * rate in this case, otherwise the statistics will be off. + */ + info->status.rates[0].count = 0; + info->status.rates[1].count = status->frame_count; + } else { + if (status->frame_count > retry_limit) { + info->status.rates[0].count = retry_limit; + info->status.rates[1].count = status->frame_count - + retry_limit; + + } else { + info->status.rates[0].count = status->frame_count; + info->status.rates[1].idx = -1; + } + } ieee80211_tx_status_irqsafe(dev->wl->hw, packet->skb); packet->skb = NULL; --- everything.orig/drivers/net/wireless/b43legacy/xmit.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/b43legacy/xmit.c 2008-10-14 16:39:04.000000000 +0200 @@ -188,7 +188,7 @@ static int generate_txhdr_fw3(struct b43 struct b43legacy_txhdr_fw3 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { const struct ieee80211_hdr *wlhdr; @@ -201,6 +201,7 @@ static int generate_txhdr_fw3(struct b43 u32 mac_ctl = 0; u16 phy_ctl = 0; struct ieee80211_rate *tx_rate; + struct ieee80211_tx_rate *rates; wlhdr = (const struct ieee80211_hdr *)fragment_data; @@ -274,7 +275,7 @@ static int generate_txhdr_fw3(struct b43 /* PHY TX Control word */ if (rate_ofdm) phy_ctl |= B43legacy_TX4_PHY_OFDM; - if (dev->short_preamble) + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL; switch (info->antenna_sel_tx) { case 0: @@ -291,6 +292,7 @@ static int generate_txhdr_fw3(struct b43 } /* MAC control */ + rates = info->control.rates; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) mac_ctl |= B43legacy_TX4_MAC_ACK; if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) @@ -299,12 +301,22 @@ static int generate_txhdr_fw3(struct b43 mac_ctl |= B43legacy_TX4_MAC_STMSDU; if (rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + + /* Overwrite rates[0].count to make the retry calculation + * in the tx status easier. need the actual retry limit to + * detect whether the fallback rate was used. + */ + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) { + rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count; mac_ctl |= B43legacy_TX4_MAC_LONGFRAME; + } else { + rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count; + } /* Generate the RTS or CTS-to-self frame */ - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) { + if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) { unsigned int len; struct ieee80211_hdr *hdr; int rts_rate; @@ -319,7 +331,7 @@ static int generate_txhdr_fw3(struct b43 if (rts_rate_fb_ofdm) mac_ctl |= B43legacy_TX4_MAC_CTSFALLBACKOFDM; - if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { ieee80211_ctstoself_get(dev->wl->hw, info->control.vif, fragment_data, @@ -362,7 +374,7 @@ int b43legacy_generate_txhdr(struct b43l u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie) { return generate_txhdr_fw3(dev, (struct b43legacy_txhdr_fw3 *)txhdr, --- everything.orig/drivers/net/wireless/b43legacy/xmit.h 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/b43legacy/xmit.h 2008-10-14 16:39:04.000000000 +0200 @@ -80,7 +80,7 @@ int b43legacy_generate_txhdr(struct b43l u8 *txhdr, const unsigned char *fragment_data, unsigned int fragment_len, - const struct ieee80211_tx_info *info, + struct ieee80211_tx_info *info, u16 cookie); --- everything.orig/drivers/net/wireless/iwlwifi/iwl-3945-rs.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-3945-rs.c 2008-10-14 16:39:04.000000000 +0200 @@ -422,34 +422,6 @@ static void rs_free_sta(void *priv, stru } -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate) -{ - int next_rate = iwl3945_get_prev_ieee_rate(rate); - - switch (priv->band) { - case IEEE80211_BAND_5GHZ: - if (rate == IWL_RATE_12M_INDEX) - next_rate = IWL_RATE_9M_INDEX; - else if (rate == IWL_RATE_6M_INDEX) - next_rate = IWL_RATE_6M_INDEX; - break; -/* XXX cannot be invoked in current mac80211 so not a regression - case MODE_IEEE80211B: - if (rate == IWL_RATE_11M_INDEX_TABLE) - next_rate = IWL_RATE_5M_INDEX_TABLE; - break; - */ - default: - break; - } - - return next_rate; -} /** * rs_tx_status - Update rate control values based on Tx results * @@ -460,17 +432,21 @@ static void rs_tx_status(void *priv_rate struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { - u8 retries, current_count; + u8 retries = 0, current_count; int scale_rate_index, first_index, last_index; unsigned long flags; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate; struct iwl3945_rs_sta *rs_sta = priv_sta; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int i; IWL_DEBUG_RATE("enter\n"); - retries = info->status.retry_count; - first_index = sband->bitrates[info->tx_rate_idx].hw_value; + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) + retries += info->status.rates[i].count; + retries--; + + first_index = sband->bitrates[info->status.rates[0].idx].hw_value; if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) { IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index); return; @@ -502,7 +478,7 @@ static void rs_tx_status(void *priv_rate last_index = scale_rate_index; } else { current_count = priv->retry_rate; - last_index = rs_adjust_next_rate(priv, + last_index = iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -518,7 +494,7 @@ static void rs_tx_status(void *priv_rate if (retries) scale_rate_index = - rs_adjust_next_rate(priv, scale_rate_index); + iwl3945_rs_next_rate(priv, scale_rate_index); } @@ -630,10 +606,11 @@ static u16 iwl3945_get_adjacent_rate(str * rate table and must reference the driver allocated rate table * */ -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, + void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + struct ieee80211_supported_band *sband = txrc->sband; + struct sk_buff *skb = txrc->skb; u8 low = IWL_RATE_INVALID; u8 high = IWL_RATE_INVALID; u16 high_low; @@ -649,6 +626,7 @@ static void rs_get_rate(void *priv_r, st struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; u16 fc, rate_mask; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); DECLARE_MAC_BUF(mac); IWL_DEBUG_RATE("enter\n"); @@ -660,7 +638,7 @@ static void rs_get_rate(void *priv_r, st is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -793,9 +771,10 @@ static void rs_get_rate(void *priv_r, st rs_sta->last_txrate_idx = index; if (sband->band == IEEE80211_BAND_5GHZ) - sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE; + info->control.rates[0].idx = rs_sta->last_txrate_idx - + IWL_FIRST_OFDM_RATE; else - sel->rate_idx = rs_sta->last_txrate_idx; + info->control.rates[0].idx = rs_sta->last_txrate_idx; IWL_DEBUG_RATE("leave: %d\n", index); } --- everything.orig/drivers/net/wireless/iwlwifi/iwl-3945.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-3945.c 2008-10-14 16:39:04.000000000 +0200 @@ -261,6 +261,35 @@ static inline const char *iwl3945_get_tx } #endif +/* + * get ieee prev rate from rate scale table. + * for A and B mode we need to overright prev + * value + */ +int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate) +{ + int next_rate = iwl3945_get_prev_ieee_rate(rate); + + switch (priv->band) { + case IEEE80211_BAND_5GHZ: + if (rate == IWL_RATE_12M_INDEX) + next_rate = IWL_RATE_9M_INDEX; + else if (rate == IWL_RATE_6M_INDEX) + next_rate = IWL_RATE_6M_INDEX; + break; +/* XXX cannot be invoked in current mac80211 so not a regression + case MODE_IEEE80211B: + if (rate == IWL_RATE_11M_INDEX_TABLE) + next_rate = IWL_RATE_5M_INDEX_TABLE; + break; + */ + default: + break; + } + + return next_rate; +} + /** * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd @@ -308,6 +337,7 @@ static void iwl3945_rx_reply_tx(struct i struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->status); int rate_idx; + int fail, i; if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) { IWL_ERROR("Read index for DMA queue txq_id (%d) index %d " @@ -318,9 +348,33 @@ static void iwl3945_rx_reply_tx(struct i } info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); + + /* Fill the MRR chain with some info about on-chip retransmissions */ + rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); + if (info->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; + + info->status.rates[0].count = tx_resp->failure_frame + 1; + fail = tx_resp->failure_frame; + for(i = 0; i < 4; i++) { + int next = iwl3945_rs_next_rate(priv, rate_idx); + + info->status.rates[i].idx = rate_idx; + + if ((rate_idx == next) || (i == 3)) { + info->status.rates[i].count = fail; + break; + } + + info->status.rates[i].count = priv->retry_rate; + fail -= priv->retry_rate; + rate_idx = next; + if (fail <= 0) + break; + } + info->status.rates[i].count++; /* add final attempt */ - info->status.retry_count = tx_resp->failure_frame; /* tx_status->rts_retry_count = tx_resp->failure_rts; */ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; @@ -329,10 +383,6 @@ static void iwl3945_rx_reply_tx(struct i txq_id, iwl3945_get_tx_fail_reason(status), status, tx_resp->rate, tx_resp->failure_frame); - rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - info->tx_rate_idx = rate_idx; IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); iwl3945_tx_queue_reclaim(priv, txq_id, index); --- everything.orig/drivers/net/wireless/iwlwifi/iwl-3945.h 2008-10-14 16:36:26.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-3945.h 2008-10-14 16:39:04.000000000 +0200 @@ -954,6 +954,8 @@ static inline int is_channel_ibss(const extern const struct iwl3945_channel_info *iwl3945_get_channel_info( const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel); +extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate); + /* Requires full declaration of iwl3945_priv before including */ #include "iwl-3945-io.h" --- everything.orig/drivers/net/wireless/iwlwifi/iwl-core.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-core.c 2008-10-14 16:52:40.000000000 +0200 @@ -88,26 +88,27 @@ EXPORT_SYMBOL(iwl_rates); * translate ucode response to mac80211 tx status control values */ void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_info *control) + struct ieee80211_tx_info *info) { int rate_index; + struct ieee80211_tx_rate *r = &info->control.rates[0]; - control->antenna_sel_tx = + info->antenna_sel_tx = ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); if (rate_n_flags & RATE_MCS_HT_MSK) - control->flags |= IEEE80211_TX_CTL_OFDM_HT; + r->flags |= IEEE80211_TX_RC_MCS; if (rate_n_flags & RATE_MCS_GF_MSK) - control->flags |= IEEE80211_TX_CTL_GREEN_FIELD; + r->flags |= IEEE80211_TX_RC_GREEN_FIELD; if (rate_n_flags & RATE_MCS_FAT_MSK) - control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH; + r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (rate_n_flags & RATE_MCS_DUP_MSK) - control->flags |= IEEE80211_TX_CTL_DUP_DATA; + r->flags |= IEEE80211_TX_RC_DUP_DATA; if (rate_n_flags & RATE_MCS_SGI_MSK) - control->flags |= IEEE80211_TX_CTL_SHORT_GI; + r->flags |= IEEE80211_TX_RC_SHORT_GI; rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags); - if (control->band == IEEE80211_BAND_5GHZ) + if (info->band == IEEE80211_BAND_5GHZ) rate_index -= IWL_FIRST_OFDM_RATE; - control->tx_rate_idx = rate_index; + r->idx = rate_index; } EXPORT_SYMBOL(iwl_hwrate_to_tx_control); --- everything.orig/drivers/net/wireless/iwlwifi/iwl3945-base.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl3945-base.c 2008-10-14 16:39:10.000000000 +0200 @@ -2397,6 +2397,7 @@ static void iwl3945_build_tx_cmd_basic(s { __le16 fc = hdr->frame_control; __le32 tx_flags = cmd->cmd.tx.tx_flags; + u8 rc_flags = info->control.rates[0].flags; cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { @@ -2423,10 +2424,10 @@ static void iwl3945_build_tx_cmd_basic(s tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= TX_CMD_FLG_RTS_MSK; tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags &= ~TX_CMD_FLG_RTS_MSK; tx_flags |= TX_CMD_FLG_CTS_MSK; } --- everything.orig/drivers/net/wireless/mac80211_hwsim.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/mac80211_hwsim.c 2008-10-14 16:39:04.000000000 +0200 @@ -209,7 +209,7 @@ static bool mac80211_hwsim_tx_frame(stru /* TODO: set mactime */ rx_status.freq = data->channel->center_freq; rx_status.band = data->channel->band; - rx_status.rate_idx = info->tx_rate_idx; + rx_status.rate_idx = info->control.rates[0].idx; /* TODO: simulate signal strength (and optional packet drop) */ /* Copy skb to all enabled radios that are on the current frequency */ @@ -269,13 +269,9 @@ static int mac80211_hwsim_tx(struct ieee if (txi->control.sta) hwsim_check_sta_magic(txi->control.sta); - memset(&txi->status, 0, sizeof(txi->status)); - if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (ack) - txi->flags |= IEEE80211_TX_STAT_ACK; - else - txi->status.excessive_retries = 1; - } + ieee80211_tx_info_clear_status(txi); + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack) + txi->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); return NETDEV_TX_OK; } --- everything.orig/drivers/net/wireless/rtl8180_dev.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/drivers/net/wireless/rtl8180_dev.c 2008-10-14 16:39:04.000000000 +0200 @@ -182,15 +182,13 @@ static void rtl8180_handle_tx(struct iee skb->len, PCI_DMA_TODEVICE); info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (flags & RTL818X_TX_DESC_FLAG_TX_OK) - info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; - } - info->status.retry_count = flags & 0xFF; + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; ieee80211_tx_status_irqsafe(dev, skb); if (ring->entries - skb_queue_len(&ring->queue) == 2) @@ -243,6 +241,7 @@ static int rtl8180_tx(struct ieee80211_h unsigned int idx, prio; dma_addr_t mapping; u32 tx_flags; + u8 rc_flags; u16 plcp_len = 0; __le16 rts_duration = 0; @@ -261,15 +260,16 @@ static int rtl8180_tx(struct ieee80211_h tx_flags |= RTL818X_TX_DESC_FLAG_DMA | RTL818X_TX_DESC_FLAG_NO_ENC; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { tx_flags |= RTL818X_TX_DESC_FLAG_RTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { tx_flags |= RTL818X_TX_DESC_FLAG_CTS; tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len, info); @@ -292,9 +292,9 @@ static int rtl8180_tx(struct ieee80211_h entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); entry->frame_len = cpu_to_le32(skb->len); - entry->flags2 = info->control.retries[0].rate_idx >= 0 ? + entry->flags2 = info->control.rates[1].idx >= 0 ? ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; - entry->retry_limit = info->control.retry_limit; + entry->retry_limit = info->control.rates[0].count; entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) @@ -856,7 +856,7 @@ static int __devinit rtl8180_probe(struc priv = dev->priv; priv->pdev = pdev; - dev->max_altrates = 1; + dev->max_rates = 2; SET_IEEE80211_DEV(dev, &pdev->dev); pci_set_drvdata(pdev, dev); --- everything.orig/drivers/net/wireless/rtl8187_dev.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/rtl8187_dev.c 2008-10-14 16:39:04.000000000 +0200 @@ -157,13 +157,13 @@ static void rtl8187_tx_cb(struct urb *ur { struct sk_buff *skb = (struct sk_buff *)urb->context; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hw *hw = info->driver_data[0]; + struct ieee80211_hw *hw = info->rate_driver_data[0]; struct rtl8187_priv *priv = hw->priv; - usb_free_urb(info->driver_data[1]); + usb_free_urb(info->rate_driver_data[1]); skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : sizeof(struct rtl8187_tx_hdr)); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); info->flags |= IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(hw, skb); } @@ -191,12 +191,12 @@ static int rtl8187_tx(struct ieee80211_h flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control)) flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { flags |= RTL818X_TX_DESC_FLAG_RTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; rts_dur = ieee80211_rts_duration(dev, priv->vif, skb->len, info); - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { flags |= RTL818X_TX_DESC_FLAG_CTS; flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; } @@ -207,7 +207,7 @@ static int rtl8187_tx(struct ieee80211_h hdr->flags = cpu_to_le32(flags); hdr->len = 0; hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); buf = hdr; ep = 2; @@ -225,7 +225,7 @@ static int rtl8187_tx(struct ieee80211_h memset(hdr, 0, sizeof(*hdr)); hdr->flags = cpu_to_le32(flags); hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32(info->control.retry_limit << 8); + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); hdr->tx_duration = ieee80211_generic_frame_duration(dev, priv->vif, skb->len, txrate); @@ -237,8 +237,8 @@ static int rtl8187_tx(struct ieee80211_h ep = epmap[skb_get_queue_mapping(skb)]; } - info->driver_data[0] = dev; - info->driver_data[1] = urb; + info->rate_driver_data[0] = dev; + info->rate_driver_data[1] = urb; usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); --- everything.orig/drivers/net/wireless/p54/p54common.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/p54/p54common.c 2008-10-14 16:52:43.000000000 +0200 @@ -556,7 +556,7 @@ static void p54_rx_frame_sent(struct iee spin_lock_irqsave(&priv->tx_queue.lock, flags); while (entry != (struct sk_buff *)&priv->tx_queue) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - range = (void *)info->driver_data; + range = (void *)info->rate_driver_data; if (range->start_addr == addr) { struct p54_control_hdr *entry_hdr; struct p54_tx_control_allocdata *entry_data; @@ -567,7 +567,7 @@ static void p54_rx_frame_sent(struct iee struct memrecord *mr; ni = IEEE80211_SKB_CB(entry->next); - mr = (struct memrecord *)ni->driver_data; + mr = (struct memrecord *)ni->rate_driver_data; freed = mr->start_addr - last_addr; } else freed = priv->rx_end - last_addr; @@ -576,7 +576,7 @@ static void p54_rx_frame_sent(struct iee __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); - memset(&info->status, 0, sizeof(info->status)); + ieee80211_tx_info_clear_status(info); entry_hdr = (struct p54_control_hdr *) entry->data; entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) @@ -586,10 +586,8 @@ static void p54_rx_frame_sent(struct iee if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { if (!(payload->status & 0x01)) info->flags |= IEEE80211_TX_STAT_ACK; - else - info->status.excessive_retries = 1; } - info->status.retry_count = payload->retries - 1; + info->status.rates[0].count = payload->retries; info->status.ack_signal = p54_rssi_to_dbm(dev, le16_to_cpu(payload->ack_rssi)); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); @@ -707,7 +705,7 @@ static void p54_assign_address(struct ie while (left--) { u32 hole_size; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; hole_size = range->start_addr - last_addr; if (!target_skb && hole_size >= len) { target_skb = entry->prev; @@ -723,7 +721,7 @@ static void p54_assign_address(struct ie largest_hole = max(largest_hole, priv->rx_end - last_addr - len); if (!skb_queue_empty(&priv->tx_queue)) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(target_skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; target_addr = range->end_addr; } } else @@ -731,7 +729,7 @@ static void p54_assign_address(struct ie if (skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct memrecord *range = (void *)info->driver_data; + struct memrecord *range = (void *)info->rate_driver_data; range->start_addr = target_addr; range->end_addr = target_addr + len; __skb_queue_after(&priv->tx_queue, target_skb, skb); @@ -814,6 +812,7 @@ static int p54_tx(struct ieee80211_hw *d size_t padding, len; u8 rate; u8 cts_rate = 0x20; + u8 rc_flags; current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4]; if (unlikely(current_queue->len > current_queue->limit)) @@ -836,18 +835,19 @@ static int p54_tx(struct ieee80211_hw *d hdr->magic1 = cpu_to_le16(0x0010); hdr->len = cpu_to_le16(len); hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1); - hdr->retry1 = hdr->retry2 = info->control.retry_limit; + hdr->retry1 = hdr->retry2 = info->control.rates[0].count; /* TODO: add support for alternate retry TX rates */ rate = ieee80211_get_tx_rate(dev, info)->hw_value; - if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) { + rc_flags = info->control.rates[0].flags; + if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) { rate |= 0x10; cts_rate |= 0x10; } - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { rate |= 0x40; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { rate |= 0x20; cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value; } --- everything.orig/drivers/net/wireless/iwlwifi/iwl-4965.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-4965.c 2008-10-14 16:39:04.000000000 +0200 @@ -619,10 +619,10 @@ static void iwl4965_gain_computation(str static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { *tx_flags |= TX_CMD_FLG_RTS_MSK; *tx_flags &= ~TX_CMD_FLG_CTS_MSK; - } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) { + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { *tx_flags &= ~TX_CMD_FLG_RTS_MSK; *tx_flags |= TX_CMD_FLG_CTS_MSK; } @@ -2070,7 +2070,7 @@ static int iwl4965_tx_status_reply_tx(st agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -2227,7 +2227,7 @@ static void iwl4965_rx_reply_tx(struct i iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, --- everything.orig/drivers/net/wireless/iwlwifi/iwl-5000.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-5000.c 2008-10-14 16:39:04.000000000 +0200 @@ -390,8 +390,8 @@ static void iwl5000_chain_noise_reset(st static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) || - (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) + if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) || + (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; else *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK; @@ -1154,7 +1154,7 @@ static int iwl5000_tx_status_reply_tx(st agg->frame_count, agg->start_idx, idx); info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; info->flags |= iwl_is_tx_success(status)? IEEE80211_TX_STAT_ACK : 0; @@ -1307,7 +1307,7 @@ static void iwl5000_rx_reply_tx(struct i iwl_txq_check_empty(priv, sta_id, tid, txq_id); } } else { - info->status.retry_count = tx_resp->failure_frame; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags = iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, --- everything.orig/drivers/net/wireless/iwlwifi/iwl-agn-rs.c 2008-10-14 16:36:26.000000000 +0200 +++ everything/drivers/net/wireless/iwlwifi/iwl-agn-rs.c 2008-10-14 16:52:41.000000000 +0200 @@ -800,7 +800,7 @@ static void rs_tx_status(void *priv_r, s !(info->flags & IEEE80211_TX_STAT_AMPDU)) return; - retries = info->status.retry_count; + retries = info->status.rates[0].count - 1; if (retries > 15) retries = 15; @@ -832,20 +832,15 @@ static void rs_tx_status(void *priv_r, s if (priv->band == IEEE80211_BAND_5GHZ) rs_index -= IWL_FIRST_OFDM_RATE; - if ((info->tx_rate_idx < 0) || - (tbl_type.is_SGI ^ - !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) || - (tbl_type.is_fat ^ - !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) || - (tbl_type.is_dup ^ - !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) || - (tbl_type.ant_type ^ info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) || - (!!(tx_rate & RATE_MCS_GF_MSK) ^ - !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) || + if ((info->status.rates[0].idx < 0) || + (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) || + (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || + (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) || + (tbl_type.ant_type != info->antenna_sel_tx) || + (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) || + (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) || (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate != - hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) { + hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) { IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate); goto out; } @@ -2103,15 +2098,17 @@ static void rs_initialize_lq(struct iwl_ return; } -static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb, struct rate_selection *sel) +static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_rate_control *txrc) { int i; + struct sk_buff *skb = txrc->skb; + struct ieee80211_supported_band *sband = txrc->sband; struct iwl_priv *priv = (struct iwl_priv *)priv_r; struct ieee80211_conf *conf = &priv->hw->conf; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); __le16 fc; struct iwl_lq_sta *lq_sta; @@ -2122,7 +2119,7 @@ static void rs_get_rate(void *priv_r, st fc = hdr->frame_control; if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } @@ -2149,13 +2146,13 @@ static void rs_get_rate(void *priv_r, st } if ((i < 0) || (i > IWL_RATE_COUNT)) { - sel->rate_idx = rate_lowest_index(sband, sta); + info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } if (sband->band == IEEE80211_BAND_5GHZ) i -= IWL_FIRST_OFDM_RATE; - sel->rate_idx = i; + info->control.rates[0].idx = i; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, --- everything.orig/drivers/net/wireless/libertas_tf/main.c 2008-10-14 16:36:28.000000000 +0200 +++ everything/drivers/net/wireless/libertas_tf/main.c 2008-10-14 16:39:04.000000000 +0200 @@ -592,14 +592,14 @@ EXPORT_SYMBOL_GPL(lbtf_remove_card); void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); - memset(&info->status, 0, sizeof(info->status)); + + ieee80211_tx_info_clear_status(info); /* * Commented out, otherwise we never go beyond 1Mbit/s using mac80211 * default pid rc algorithm. * * info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt; */ - info->status.excessive_retries = fail ? 1 : 0; if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail) info->flags |= IEEE80211_TX_STAT_ACK; skb_pull(priv->tx_skb, sizeof(struct txpd)); --- everything.orig/drivers/net/wireless/zd1211rw/zd_usb.c 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/zd1211rw/zd_usb.c 2008-10-14 16:39:04.000000000 +0200 @@ -907,7 +907,7 @@ free_urb: * it might be freed by zd_mac_tx_to_dev or mac80211) */ info = IEEE80211_SKB_CB(skb); - usb = &zd_hw_mac(info->driver_data[0])->chip.usb; + usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb; zd_mac_tx_to_dev(skb, urb->status); free_tx_urb(usb, urb); tx_dec_submitted_urbs(usb); --- everything.orig/drivers/net/wireless/rt2x00/rt2x00queue.h 2008-10-14 16:36:27.000000000 +0200 +++ everything/drivers/net/wireless/rt2x00/rt2x00queue.h 2008-10-14 16:39:04.000000000 +0200 @@ -104,6 +104,8 @@ enum skb_frame_desc_flags { * * @flags: Frame flags, see &enum skb_frame_desc_flags. * @desc_len: Length of the frame descriptor. + * @tx_rate_idx: the index of the TX rate, used for TX status reporting + * @tx_rate_flags: the TX rate flags, used for TX status reporting * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. @@ -113,9 +115,12 @@ enum skb_frame_desc_flags { * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { - unsigned int flags; + u8 flags; + + u8 desc_len; + u8 tx_rate_idx; + u8 tx_rate_flags; - unsigned int desc_len; void *desc; __le32 iv; -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html