This adjusts ath9k's signal quality reporting taking into consideration received beacons at an RSSI of 45 should indicate you can use of MCS 15 rate (144 Mbps) reliably on dual stream card. Keep in mind mac80211 does not yet have aggregation fixed but this should still provide more accurate results. Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx> --- drivers/net/wireless/ath9k/main.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 16c90c1..6bcee4a 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -279,8 +279,15 @@ static void ath9k_rx_prepare(struct ath_softc *sc, rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100)); rx_status->antenna = status->antenna; - /* XXX Fix me, 64 cannot be the max rssi value, rigure it out */ - rx_status->qual = status->rssi * 100 / 64; + /* at 45 you will be able to use MCS 15 reliably. A more elaborate + * scheme can be used here but it requires tables of SNR/throughput for + * each possible mode used. */ + rx_status->qual = status->rssi * 100 / 45; + + /* rssi can be more than 45 though, anything above that + * should be considered at 100% */ + if (rx_status->qual > 100) + rx_status->qual = 100; if (status->flags & ATH_RX_MIC_ERROR) rx_status->flag |= RX_FLAG_MMIC_ERROR; -- 1.5.6.rc2.15.g457bb.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
