Rather than setting the available bands by looking only at the phy-chip,
we now use bits in the eeprom, which indicates the real capabilities.
Reported-by: Pavel Roskin <proski@xxxxxxx>
Signed-off-by: Christian Lamparter
---
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 0180466..48f91f3 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -306,8 +306,8 @@ static int p54_convert_rev1(struct ieee80211_hw *dev,
return 0;
}
-static const char *p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
- "Frisbee", "Xbow", "Longbow" };
+static const char *p54_rf_chips[] = { "NULL", "Duette3", "Duette2",
+ "Frisbee", "Xbow", "Longbow", "NULL", "NULL" };
static int p54_init_xbow_synth(struct ieee80211_hw *dev);
static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
@@ -319,6 +319,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
void *tmp;
int err;
u8 *end = (u8 *)eeprom + len;
+ u16 synth;
DECLARE_MAC_BUF(mac);
wrap = (struct eeprom_pda_wrap *) eeprom;
@@ -400,8 +401,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
tmp = entry->data;
while ((u8 *)tmp < entry->data + data_len) {
struct bootrec_exp_if *exp_if = tmp;
- if (le16_to_cpu(exp_if->if_id) == 0xF)
- priv->rxhw = le16_to_cpu(exp_if->variant) & 0x07;
+ if (le16_to_cpu(exp_if->if_id) == 0xf)
+ synth = le16_to_cpu(exp_if->variant);
tmp += sizeof(struct bootrec_exp_if);
}
break;
@@ -427,22 +428,13 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
goto err;
}
- switch (priv->rxhw) {
- case 4: /* XBow */
+ priv->rxhw = synth & 0x07;
+ if (priv->rxhw == 4)
p54_init_xbow_synth(dev);
- case 1: /* Indigo? */
- case 2: /* Duette */
- dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
- case 3: /* Frisbee */
- case 5: /* Longbow */
+ if (!(synth & 0x40))
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
- break;
- default:
- printk(KERN_ERR "%s: unsupported RF-Chip\n",
- wiphy_name(dev->wiphy));
- err = -EINVAL;
- goto err;
- }
+ if (!(synth & 0x80))
+ dev->wiphy->bands[IEEE80211_BAND_5GHZ] = &band_5GHz;
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
