Search Linux Wireless

Re: [PATCH v4] wireless-regdb: Update regulatory rules for South Korea (KR)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 30, 2022 at 09:49:07PM +0900, Sungbo Eo wrote:
> This patch is based on MSIT Public Notification 2021-86 ("Unlicensed Radio
> Equipment Established Without Notice"), officially announced on 2021-11-29.
> 
> The PSD must not exceed 2.5 mW/MHz if the frequency range includes all or
> part of 5230-5250 MHz and the bandwidth is equal to or less than 40 MHz.
> This leads to the following:
> * 5230-5250 @ 20 -> 17 dBm
> * 5210-5250 @ 40 -> 20 dBm
> Here the power limit for >20 MHz bandwidth is also lowered to 17 dBm, as
> it's not possible to set different power limits for different bandwidths
> at the moment.
> 
> Extend the last 5 GHz frequency range to 5850 MHz.
> 
> Wi-Fi 6E is now allowed with the following restrictions:
> * Indoor: the full 1.2 GHz range, up to 160 MHz bandwidth and 2 dBm/MHz PSD
> * Outdoor: the lower 500 MHz range, up to 160 MHz bandwidth and 25 mW EIRP
> Here only the former entry is added.
> 
> And also update the regulatory source links.
> 
> Signed-off-by: Sungbo Eo <mans0n@xxxxxxxxxx>
> ---
> v4:
> * merge 5210-5230 MHz band rule
> * revert back to "indoor only" 6E rule as its power limit is higher
> 
> v3:
> * update regulatory source to newer revision
> * replace "indoor only" 6E rule with "both indoor and outdoor" rule
>   as "indoor only" rule limits PSD instead of EIRP
> 
> v2:
> * split 5150-5250 MHz band rule to accommodate the PSD limit
> * remove AUTO-BW flag from 6 GHz band rule
> ---
>  db.txt | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/db.txt b/db.txt
> index b898799..9b02a2c 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -862,15 +862,21 @@ country KP: DFS-JP
>  	(5490 - 5630 @ 20), (30), DFS
>  	(5735 - 5815 @ 20), (30)
>  
> +# Source:
> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000205195
> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000205187
> +# https://www.law.go.kr/LSW//admRulLsInfoP.do?chrClsCd=&admRulSeq=2100000206568
>  country KR: DFS-JP
> -	# ref: https://www.rra.go.kr
>  	(2400 - 2483.5 @ 40), (23)
> -	(5150 - 5250 @ 80), (23), AUTO-BW
> +	(5150 - 5230 @ 40), (23), AUTO-BW
> +	# max. PSD 2.5 mW/MHz in 5230-5250 MHz frequency range
> +	(5230 - 5250 @ 20), (17), AUTO-BW
>  	(5250 - 5350 @ 80), (20), DFS, AUTO-BW
>  	(5470 - 5725 @ 160), (20), DFS
> -	(5725 - 5835 @ 80), (23)
> -	# 60 GHz band channels 1-4,
> -	# ref: http://www.law.go.kr/%ED%96%89%EC%A0%95%EA%B7%9C%EC%B9%99/%EB%AC%B4%EC%84%A0%EC%84%A4%EB%B9%84%EA%B7%9C%EC%B9%99
> +	(5725 - 5850 @ 80), (23)
> +	# 6 GHz band
> +	(5925 - 7125 @ 160), (15), NO-OUTDOOR

I'm curious about this power limit. In v1/v2 it was 24 dBm, then in v3
you lowered it for indoor/outdoor. Now you've chaned it back to indoor
only, but the limit is 15 dBm rather than the 24 you had in v1/v2. Why
the change?

Thanks,
Seth

> +	# 60 GHz band channels 1-4
>  	(57000 - 66000 @ 2160), (43)
>  
>  country KW: DFS-ETSI
> -- 
> 2.35.0
> 



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux