On some modules, PCIE_GPIO_CFG_REG is not initialized to right value,
this will cause WCN6855 hardware fails to be enumerated.
Fix it by force writing the correct value to this register when power
on.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/pci.c | 11 +++++++++++
drivers/net/wireless/ath/ath11k/pci.h | 3 +++
2 files changed, 14 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index d73b522a0081..06968ad488b0 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -445,6 +445,16 @@ static void ath11k_pci_force_wake(struct ath11k_base *ab)
mdelay(5);
}
+static void ath11k_pci_gpio_reset(struct ath11k_base *ab)
+{
+ int val;
+
+ ath11k_pci_write32(ab, PCIE_GPIO_CFG_REG, PCIE_GPIO_RESET_VAL);
+ mdelay(10);
+ val = ath11k_pci_read32(ab, PCIE_GPIO_CFG_REG);
+ ath11k_dbg(ab, ATH11K_DBG_PCI, "gpio cfg: 0x%x\n", val);
+}
+
static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on)
{
mdelay(100);
@@ -461,6 +471,7 @@ static void ath11k_pci_sw_reset(struct ath11k_base *ab, bool power_on)
ath11k_pci_clear_dbg_registers(ab);
ath11k_pci_soc_global_reset(ab);
ath11k_mhi_set_mhictrl_reset(ab);
+ ath11k_pci_gpio_reset(ab);
}
int ath11k_pci_get_msi_irq(struct device *dev, unsigned int vector)
diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h
index 61d67b20a0eb..2716fc7745d6 100644
--- a/drivers/net/wireless/ath/ath11k/pci.h
+++ b/drivers/net/wireless/ath/ath11k/pci.h
@@ -52,6 +52,9 @@
#define WLAON_QFPROM_PWR_CTRL_REG 0x01f8031c
#define QFPROM_PWR_CTRL_VDD4BLOW_MASK 0x4
+#define PCIE_GPIO_CFG_REG 0x0180e000
+#define PCIE_GPIO_RESET_VAL 0xc5
+
struct ath11k_msi_user {
char *name;
int num_vectors;
--
2.25.1
