From: Ilan Peer <ilan.peer@xxxxxxxxx>
Based on Draft P802.11be_D1.3.
Signed-off-by: Ilan Peer <ilan.peer@xxxxxxxxx>
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
include/linux/ieee80211.h | 270 ++++++++++++++++++++++++++++++++++++++
1 file changed, 270 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 60ee7b3f58e7..25137f2b6f35 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <linux/if_ether.h>
#include <linux/etherdevice.h>
+#include <linux/bitfield.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
@@ -1925,6 +1926,135 @@ struct ieee80211_mu_edca_param_set {
struct ieee80211_he_mu_edca_param_ac_rec ac_vo;
} __packed;
+#define IEEE80211_EHT_MCS_NSS_RX 0x0f
+#define IEEE80211_EHT_MCS_NSS_TX 0xf0
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_20mhz_only - EHT 20MHz only station max
+ * supported NSS for per MCS.
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs7_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 0 - 7.
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 8 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_20mhz_only {
+ u8 rx_tx_mcs7_max_nss;
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_bw - EHT max supported NSS per MCS (except
+ * 20MHz only stations).
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 8 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_bw {
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp - EHT max supported NSS per MCS
+ *
+ * @only_20mhz: For a 20 MHz-only STA, indicates the maximum number of spatial
+ * streams supported for reception and the maximum number of spatial streams
+ * supported for transmission, for each MCS value. Optionally present in
+ * &struct ieee80211_eht_cap_elem.
+ * @bw_80: If the operating channel width of the STA is greater than or equal to
+ * 80 MHz, indicates the maximum number of spatial streams supported for
+ * reception and the maximum number of spatial streams supported for
+ * transmission, for each MCS value, in a PPDU with a bandwidth of 20, 40, or
+ * 80 MHz. Optionally present in &struct ieee80211_eht_cap_elem.
+ * @bw_160: If the operating channel width of the STA is greater than or equal to
+ * 160 MHz, indicates the maximum number of spatial streams supported for
+ * reception and the maximum number of spatial streams supported for
+ * transmission, for each MCS value, in a PPDU with a bandwidth of 160 MHz.
+ * Optionally present in &struct ieee80211_eht_cap_elem.
+ * @bw_320: If the operating channel width of the STA is greater than or equal to
+ * 320 MHz, indicates the maximum number of spatial streams supported for
+ * reception and the maximum number of spatial streams supported for
+ * transmission, for each MCS value, in a PPDU with a bandwidth of 320 MHz.
+ * Optionally present in &struct ieee80211_eht_cap_elem.
+ */
+struct ieee80211_eht_mcs_nss_supp {
+ struct ieee80211_eht_mcs_nss_supp_20mhz_only only_20mhz;
+ struct ieee80211_eht_mcs_nss_supp_bw bw_80;
+ struct ieee80211_eht_mcs_nss_supp_bw bw_160;
+ struct ieee80211_eht_mcs_nss_supp_bw bw_320;
+};
+
+/**
+ * struct ieee80211_eht_cap_elem_fixed - EHT capabilities fixed data
+ *
+ * This structure is the "EHT capabilities element" fixed fields as
+ * described in P802.11be_D1.0 section 9.4.2.295a
+ *
+ * @mac_cap_info: MAC capabilities
+ * @phy_cap_info: PHY capabilities
+ */
+struct ieee80211_eht_cap_elem_fixed {
+ u8 mac_cap_info[2];
+ u8 phy_cap_info[8];
+} __packed;
+
+/**
+ * struct ieee80211_eht_cap_elem - EHT capabilities element
+ * @fixed: fixed parts, see &ieee80211_eht_cap_elem_fixed
+ * @optional: optional parts
+ */
+struct ieee80211_eht_cap_elem {
+ struct ieee80211_eht_cap_elem_fixed fixed;
+
+ /*
+ * Followed by:
+ * Supported EHT-MCS And NSS Set field: 0, 3, 6, 9, or 12 octets.
+ * EHT PPE Thresholds field: variable length.
+ */
+ u8 optional[];
+} __packed;
+
+/**
+ * struct ieee80211_eht_operation - eht operation element
+ *
+ * This structure is the "eht operation element" fields as
+ * described in P802.11be_D1.0 section 9.4.2.295c
+ *
+ * TODO: the actual layout of the EHT operation element is not clearly defined
+ * in the specification. For now assume the below layout.
+ */
+struct ieee80211_eht_operation {
+ u8 chan_width;
+ u8 ccfs;
+} __packed;
+
/* 802.11ac VHT Capabilities */
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001
@@ -2129,6 +2259,8 @@ enum ieee80211_client_reg_power {
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL 0x1e
+
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe
@@ -2599,6 +2731,141 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1)
+/* EHT MAC capabilities as defined in P802.11be_D1.0 section 9.4.2.295c */
+#define IEEE80211_EHT_MAC_CAP0_NSEP_PRIO_ACCESS_SUPP 0x01
+#define IEEE80211_EHT_MAC_CAP0_OM_CONTROL_SUPP 0x02
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_SUPP 0x04
+#define IEEE80211_EHT_MAC_CAP0_ARR_CONTROL_SUPP 0x08
+
+/* EHT PHY capabilities as defined in P802.11be_D1.0 section 9.4.2.295c */
+#define IEEE80211_EHT_PHY_CAP0_RSERVED 0x01
+#define IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ 0x02
+#define IEEE80211_EHT_PHY_CAP0_242_TONE_RU 0x04
+#define IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI 0x08
+#define IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO 0x10
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER 0x20
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE 0x40
+
+/* EHT beamformee SU number of spatial streams <= 80MHz is split between octet 0
+ * and octet 1
+ */
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE_SS_80MHZ 0x80
+
+#define IEEE80211_EHT_PHY_CAP1_SU_BEAMFORMEE_SS_80MHZ 0x03
+#define IEEE80211_EHT_PHY_CAP1_SU_BEAMFORMEE_SS_160MHZ 0x1c
+#define IEEE80211_EHT_PHY_CAP1_SU_BEAMFORMEE_SS_320MHZ 0xe0
+
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ 0x07
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ 0x38
+
+/* EHT number of sounding dimensions for 320MHz is split between octet 2
+ * and octet 3
+ */
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ 0xc0
+
+#define IEEE80211_EHT_PHY_CAP3_SOUNDING_DIM_320MHZ 0x01
+#define IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK 0x02
+#define IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK 0x04
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FEEDBACK 0x08
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FEEDBACK 0x10
+#define IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FEEDBACK 0x20
+#define IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FEEDBACK 0x40
+#define IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FEEDBACK 0x80
+
+#define IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO 0x01
+#define IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI 0x08
+#define IEEE80211_EHT_PHY_CAP4_MAX_NC 0xf0
+
+#define IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK 0x01
+#define IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT 0x08
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL 0x30
+
+/* Maximum number of supported EHT LTF is split between octet 5
+ * and octet 6
+ */
+#define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF 0xc0
+
+#define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF 0x03
+#define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP 0x7c
+#define IEEE80211_EHT_PHY_CAP6_EHT_DUP_6GHZ_SUPP 0x80
+
+#define IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW 0x01
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ 0x02
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ 0x08
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ 0x10
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ 0x20
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ 0x40
+#define IEEE80211_EHT_PHY_CAP7_RESERVED 0x80
+
+/*
+ * EHT operation channel width as defined in P802.11be_D1.0 section 9.4.2.295a
+ */
+#define IEEE80211_EHT_OPER_CHAN_WIDTH 0x7
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_20MHZ 0
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_40MHZ 1
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ 2
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_160MHZ 3
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_320MHZ 4
+
+/* Calculate 802.11be EHT capabilities IE Tx/Rx EHT MCS NSS Support Field size */
+static inline u8
+ieee80211_eht_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap,
+ const struct ieee80211_eht_cap_elem_fixed *eht_cap)
+{
+ u8 count = 0;
+
+ if (!(he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL))
+ return 4;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)
+ count += 3;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 3;
+
+ if (eht_cap->phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)
+ count += 3;
+
+ return count;
+}
+
+/* 802.11be EHT PPE Thresholds */
+#define IEEE80211_EHT_PPE_THRES_NSS_POS 0
+#define IEEE80211_EHT_PPE_THRES_NSS_MASK 0xf
+#define IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK 0x1f0
+#define IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE 3
+
+/*
+ * Calculate 802.11be EHT capabilities IE EHT field size
+ */
+static inline u8
+ieee80211_eht_ppe_size(u16 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u32 n;
+
+ if (!(phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT))
+ return 0;
+
+ n = hweight8(ppe_thres_hdr &
+ IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= 1 + u16_get_bits(ppe_thres_hdr, IEEE80211_EHT_PPE_THRES_NSS_MASK);
+
+ /*
+ * Each pair is 6 bits, and we need to add the 9 "header" bits to the
+ * total size.
+ */
+ n = n * IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2 + 9;
+ return DIV_ROUND_UP(n, 8);
+}
#define LISTEN_INT_USF GENMASK(15, 14)
#define LISTEN_INT_UI GENMASK(13, 0)
@@ -3054,6 +3321,9 @@ enum ieee80211_eid_ext {
WLAN_EID_EXT_SHORT_SSID_LIST = 58,
WLAN_EID_EXT_HE_6GHZ_CAPA = 59,
WLAN_EID_EXT_UL_MU_POWER_CAPA = 60,
+ WLAN_EID_EXT_EHT_OPERATION = 106,
+ WLAN_EID_EXT_EHT_MULTI_LINK = 107,
+ WLAN_EID_EXT_EHT_CAPABILITY = 108,
};
/* Action category code */
--
2.34.1
