Search Linux Wireless

Re: [PATCH RFC 1/4] brcmfmac: use separate firmware for 43430 revision 4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Arend,

Am 30.01.22 um 13:56 schrieb Arend Van Spriel:
> I am also a bit confused. The subject mentions revision 4, but your
> log shows 43430/2. Took some digging but found that numerical rev 2
> matches 'b0' and rev 3 matches 'b1'. The BT part is unknown territory
> for me so can not clarify things there.

my patch based on a similar patch [1] by Mikhail Rudenko. I falsely
assumed that the Ampak AP6212 and Raspberry Pi Zero 2 W are using
different wifi chips. But now it i think they are identical. If i grep
the firmware blob for the Raspberry Pi Zero 2 W, i getting this:

# strings firmware.bin | grep 4343
43436b0-roml/sdio-g-pool-p2p-pno-pktfilter-keepalive-aoe-mchan-proptxstatus-ampduhostreorder-lpc-wl11u-fmc-wepso-anqpo-srmem-srfast-11nprop-ob-ndoe-rssiindur-bcol-gtr-mfp-sdiorxenhance-extsae
Version: 9.88.4.65 (test) (f149b32@shgit)  (r679549) CRC: 3e0bc4b6 Date:
Fri 2020-10-09 14:45:07 CST Ucode Ver: 1043.20742 FWID: 01-f40f3270

So i will drop this patch from the series and hope the firmware isn't
customized.

Best regards

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.17-rc2&id=f8d6523891cf07468f0bfe21aba8b562a6f75780

>
> Regards,
> Arend
>
> On January 30, 2022 12:35:35 PM Stefan Wahren <stefan.wahren@xxxxxxxx>
> wrote:
>
>> Hi Arend,
>>
>> Am 24.01.22 um 10:43 schrieb Arend van Spriel:
>>> On 1/22/2022 1:35 PM, Stefan Wahren wrote:
>>>> Am 01.01.22 um 21:26 schrieb Stefan Wahren:
>>>>> A separate firmware is needed, for Broadcom 43430 revision 4. This
>>>>> chip can be found on e.g. certain revisions of Raspberry Pi Zero 2 W.
>>>>> Original firmware file from IC vendor is named
>>>>> 'brcmfmac43436-sdio.bin',
>>>>> but brcmfmac and also btbcm drivers report chip id 43430, so
>>>>> requested
>>>>> firmware file name is 'brcmfmac43430c0-sdio.bin' in line with other
>>>>> 43430 revisions.
>>>>>
>>>>> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
>>>>> ---
>>>>>
>>>>> Hi,
>>>>> i'm not sure about all these mappings. All i can say is that the wifi
>>>>> interface of the RPi Zero 2 cames up with this patch.
>>>> gentle ping (yes, i'm aware of the merge window)
>>>
>>> Sorry, Stefan
>>>
>>> Should have seen this earlier, but here it is....
>>>
>>>>>
>>>>>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++-
>>>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
>>>>> b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
>>>>> index 8effeb7..c79bd47 100644
>>>>> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
>>>>> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
>>>>> @@ -618,6 +618,7 @@ BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-sdio");
>>>>>  /* Note the names are not postfixed with a1 for backward
>>>>> compatibility */
>>>>>  BRCMF_FW_CLM_DEF(43430A1, "brcmfmac43430-sdio");
>>>>>  BRCMF_FW_DEF(43430B0, "brcmfmac43430b0-sdio");
>>>>> +BRCMF_FW_CLM_DEF(43430C0, "brcmfmac43430c0-sdio");
>>>>>  BRCMF_FW_CLM_DEF(43455, "brcmfmac43455-sdio");
>>>>>  BRCMF_FW_DEF(43456, "brcmfmac43456-sdio");
>>>>>  BRCMF_FW_CLM_DEF(4354, "brcmfmac4354-sdio");
>>>>> @@ -649,7 +650,8 @@ static const struct brcmf_firmware_mapping
>>>>> brcmf_sdio_fwnames[] = {
>>>>>      BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
>>>>>      BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0),
>>>>>      BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000002, 43430A1),
>>>>> -    BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFC, 43430B0),
>>>>> +    BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000004, 43430C0),
>>>
>>> According to the revision mask your firmware seems to be for numerical
>>> revision 2 of this chip...
>>>
>>>>> +    BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFF8, 43430B0),
>>>
>>> and for the b0 the chip revision is 3 (or higher). So the alphanumeric
>>> revision of your chip would be 'a2' instead of 'c0'.
>>
>> i changed this to a2 for the next version of this series. But before i
>> send them out, please doublecheck the kernel log 5.17-rc1 of my RPi Zero
>> 2 W. I confuses me that the bluetooth part tells about BCM43430B0:
>>
>> [    9.653199] Bluetooth: hci0: BCM: chip id 115
>> [    9.653749] Bluetooth: hci0: BCM: features 0x0e
>> [    9.655466] Bluetooth: hci0: BCM43430B0
>> [    9.655502] Bluetooth: hci0: BCM43430B0 (002.001.012) build 0000
>> [    9.659512] vc4-drm soc:gpu: bound 3f400000.hvs (ops
>> vc4_drm_unregister [vc4])
>> [    9.667047] Bluetooth: hci0: BCM43430B0 'brcm/BCM43430B0.hcd' Patch
>> [    9.668052] brcmfmac: brcmf_fw_alloc_request: using
>> brcm/brcmfmac43430a2-sdio for chip BCM43430/2
>> [    9.668567] brcmfmac mmc1:0001:1: Direct firmware load for
>> brcm/brcmfmac43430a2-sdio.raspberrypi,model-zero-2-w.bin failed with
>> error -2
>> [    9.673724] vc4-drm soc:gpu: bound 3f400000.hvs (ops
>> vc4_drm_unregister [vc4])
>> [    9.697996] brcmfmac mmc1:0001:1: Direct firmware load for
>> brcm/brcmfmac43430a2-sdio.raspberrypi,model-zero-2-w.txt failed with
>> error -2
>> [    9.816030] brcmfmac: brcmf_fw_alloc_request: using
>> brcm/brcmfmac43430a2-sdio for chip BCM43430/2
>> [    9.840128] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/2
>> wl0: Oct  9 2020 14:44:32 version 9.88.4.65 (test) (f149b32@shgit)
>> (r679549) FWID 01-f40f3270
>> [    9.919182] random: crng init done
>> [    9.919200] random: 7 urandom warning(s) missed due to ratelimiting
>> [   10.105524] vc4-drm soc:gpu: bound 3f400000.hvs (ops
>> vc4_drm_unregister [vc4])
>> [   10.118011] vc4-drm soc:gpu: bound 3f902000.hdmi (ops
>> vc4_drm_unregister [vc4])
>> [   10.118190] vc4-drm soc:gpu: bound 3f806000.vec (ops
>> vc4_drm_unregister [vc4])
>> [   10.118364] vc4-drm soc:gpu: bound 3f004000.txp (ops
>> vc4_drm_unregister [vc4])
>> [   10.118503] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops
>> vc4_drm_unregister [vc4])
>> [   10.118625] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops
>> vc4_drm_unregister [vc4])
>> [   10.118747] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops
>> vc4_drm_unregister [vc4])
>> [   10.118847] vc4-drm soc:gpu: bound 3fc00000.v3d (ops
>> vc4_drm_unregister [vc4])
>> [   10.119331] checking generic (1e330000 8ca000) vs hw (0 ffffffff)
>> [   10.119339] fb0: switching to vc4 from simple
>> [   10.122443] Console: switching to colour dummy device 80x30
>> [   10.125147] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on
>> minor 0
>> [   10.203822] Console: switching to colour frame buffer device 240x75
>> [   10.241067] vc4-drm soc:gpu: [drm] fb0: vc4drmfb frame buffer device
>> [   10.414793] Bluetooth: hci0: BCM4343B0 37.4MHz wlbga_iLNA_iTR
>> [Baseline: 0092]
>> [   10.414822] Bluetooth: hci0: BCM43430B0 (002.001.012) build 0092
>>
>> Thanks
>
>
>




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux