Search Linux Wireless

Re: [PATCH 1/2] ath11k: pci: fix crash on suspend if board file is not found

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kalle Valo <kvalo@xxxxxxxxxx> wrote:

> Mario reported that the kernel was crashing on suspend if ath11k was not able
> to find a board file:
> 
> [  473.693286] PM: Suspending system (s2idle)
> [  473.693291] printk: Suspending console(s) (use no_console_suspend to debug)
> [  474.407787] BUG: unable to handle page fault for address: 0000000000002070
> [  474.407791] #PF: supervisor read access in kernel mode
> [  474.407794] #PF: error_code(0x0000) - not-present page
> [  474.407798] PGD 0 P4D 0
> [  474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI
> [  474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G        W         5.16.0 #248
> [...]
> [  474.407868] Call Trace:
> [  474.407870]  <TASK>
> [  474.407874]  ? _raw_spin_lock_irqsave+0x2a/0x60
> [  474.407882]  ? lock_timer_base+0x72/0xa0
> [  474.407889]  ? _raw_spin_unlock_irqrestore+0x29/0x3d
> [  474.407892]  ? try_to_del_timer_sync+0x54/0x80
> [  474.407896]  ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k]
> [  474.407912]  ath11k_core_suspend+0x34/0x130 [ath11k]
> [  474.407923]  ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci]
> [  474.407928]  pci_pm_suspend+0x7e/0x170
> [  474.407935]  ? pci_pm_freeze+0xc0/0xc0
> [  474.407939]  dpm_run_callback+0x4e/0x150
> [  474.407947]  __device_suspend+0x148/0x4c0
> [  474.407951]  async_suspend+0x20/0x90
> dmesg-efi-164255130401001:
> Oops#1 Part1
> [  474.407955]  async_run_entry_fn+0x33/0x120
> [  474.407959]  process_one_work+0x220/0x3f0
> [  474.407966]  worker_thread+0x4a/0x3d0
> [  474.407971]  kthread+0x17a/0x1a0
> [  474.407975]  ? process_one_work+0x3f0/0x3f0
> [  474.407979]  ? set_kthread_struct+0x40/0x40
> [  474.407983]  ret_from_fork+0x22/0x30
> [  474.407991]  </TASK>
> 
> The issue here is that board file loading happens after ath11k_pci_probe()
> succesfully returns (ath11k initialisation happends asynchronously) and the
> suspend handler is still enabled, of course failing as ath11k is not properly
> initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and
> resume.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
> 
> Reported-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215504
> Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>

2 patches applied to ath-next branch of ath.git, thanks.

b4f4c56459a5 ath11k: pci: fix crash on suspend if board file is not found
3df6d74aedfd ath11k: mhi: use mhi_sync_power_up()

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220127090117.2024-1-kvalo@xxxxxxxxxx/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux