Search Linux Wireless

Re: [PATCH 5/5] spi: make remove callback a void function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

On 23.01.22 18:52, Uwe Kleine-König wrote:
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---

[...]

  drivers/net/ieee802154/adf7242.c                      |  4 +---
  drivers/net/ieee802154/at86rf230.c                    |  4 +---
  drivers/net/ieee802154/ca8210.c                       |  6 ++----
  drivers/net/ieee802154/cc2520.c                       |  4 +---
  drivers/net/ieee802154/mcr20a.c                       |  4 +---
  drivers/net/ieee802154/mrf24j40.c                     |  4 +---

[...]

For the ieee802154 drivers:

Acked-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxxxxx>

regards
Stefan Schmidt



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux