Search Linux Wireless

Re: [PATCH v2] ath11k: Reconfigure hardware rate for WCN6855 after vdev is started

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Baochen Qiang <quic_bqiang@xxxxxxxxxxx> wrote:

> There is an issue that WCN6855 tries to connect to an AP using
> a hardware rate of 1Mb/s , even though the AP has announced
> expected rates as [24, 36, 48, 54] in Probe Response frame.
> 
> The reason is that WCN6855 firmware clears hardware rate info
> of management frames when vdev starts and uses 1Mb/s as default.
> To solve it, reconfigure the rate after vdev is started.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
> 
> Signed-off-by: Baochen Qiang <quic_bqiang@xxxxxxxxxxx>
> Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

dc7ff75690ea ath11k: Reconfigure hardware rate for WCN6855 after vdev is started

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220112025400.2222-1-quic_bqiang@xxxxxxxxxxx/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux