When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes: 2cdf2b3cdf54 ("ath11k: add 6ghz params in peer assoc command")
Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 07f499d5ec92..fe4103bcfee3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2319,6 +2319,9 @@ static void ath11k_peer_assoc_h_he_6ghz(struct ath11k *ar,
if (!arg->he_flag || band != NL80211_BAND_6GHZ || !sta->he_6ghz_capa.capa)
return;
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ arg->bw_40 = true;
+
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
arg->bw_80 = true;
base-commit: 69a6130e6ab00306fe1552c73eb0d7a0dd4b4c04
--
2.31.1
