Hello,
Here is a series attempting to bring support for scans in the
IEEE 802.15.4 stack. A second series follows in order to align the
tooling with these changes, bringing support for a number of new
features such as:
* Sending (or stopping) beacons. Intervals ranging from 0 to 14 are
valid for passively sending beacons at regular intervals. An interval
of 15 would request the core to answer to received BEACON_REQ.
# iwpan dev wpan0 beacons send interval 2 # send BEACON at a fixed rate
# iwpan dev wpan0 beacons send interval 15 # answer BEACON_REQ only
# iwpan dev wpan0 beacons stop # apply to both cases
* Scanning all the channels or only a subset:
# iwpan dev wpan1 scan type passive duration 3 # will not trigger BEACON_REQ
# iwpan dev wpan1 scan type active duration 3 # will trigger BEACON_REQ
* If a beacon is received during a scan, the internal PAN list is
updated and can be dumped, flushed and configured with:
# iwpan dev wpan1 pans dump
PAN 0xffff (on wpan1)
coordinator 0x2efefdd4cdbf9330
page 0
channel 13
superframe spec. 0xcf22
LQI 0
seen 7156ms ago
# iwpan dev wpan1 pans flush
# iwpan dev wpan1 set max_pan_entries 100
# iwpan dev wpan1 set pans_expiration 3600
* It is also possible to monitor the events with:
# iwpan event
* As well as triggering a non blocking scan:
# iwpan dev wpan1 scan trigger type passive duration 3
# iwpan dev wpan1 scan done
# iwpan dev wpan1 scan abort
The PAN list gets automatically updated by dropping the expired PANs
each time the user requests access to the list.
Internally, both requests (scan/beacons) are handled periodically by
delayed workqueues when relevant.
So far the only technical point that is missing in this series is the
possibility to grab a reference over the module driving the net device
in order to prevent module unloading during a scan or when the beacons
work is ongoing.
Finally, this series is a deep reshuffle of David Girault's original
work, hence the fact that he is almost systematically credited, either
by being the only author when I created the patches based on his changes
with almost no modification, or with a Co-developped-by tag whenever the
final code base is significantly different than his first proposal while
still being greatly inspired from it.
Cheers,
Miquèl
Changes in v2:
* Create two new netlink commands to set the maximum number of PANs that
can be listed as well as their expiration time (in seconds).
* Added a patch to the series to avoid ignoring bad frames in hwsim as
requested by Alexander.
* Changed the symbol duration type to receive nanoseconds instead of
microseconds.
* Dropped most of the hwsim patches and reworked how drivers advertise
their channels in order to be capable of deriving the symbol durations
automatically.
* The scanning boolean gets turned into an atomic.
* The ca8210 driver does not support scanning, implement the driver
hooks to reflect the situation.
* Reworked a bit the content of each patch to ease the introduction of
active scans.
* Added active scan support.
David Girault (5):
net: ieee802154: Move IEEE 802.15.4 Kconfig main entry
net: mac802154: Include the softMAC stack inside the IEEE 802.15.4
menu
net: ieee802154: Move the address structure earlier
net: ieee802154: Add a kernel doc header to the ieee802154_addr
structure
net: ieee802154: Trace the registration of new PANs
Miquel Raynal (22):
net: mac802154: Split the set channel hook implementation
net: mac802154: Ensure proper channel selection at probe time
net: ieee802154: Improve the way supported channels are declared
net: ieee802154: Give more details to the core about the channel
configurations
net: mac802154: Convert the symbol duration into nanoseconds
net: mac802154: Set the symbol duration automatically
net: ieee802154: hwsim: Ensure frame checksum are valid
net: ieee802154: Drop symbol duration settings when the core does it
already
net: ieee802154: Return meaningful error codes from the netlink
helpers
net: ieee802154: Add support for internal PAN management
net: ieee802154: Define a beacon frame header
net: ieee802154: Define frame types
net: ieee802154: Add support for scanning requests
net: mac802154: Handle scan requests
net: ieee802154: Full PAN management
net: ieee802154: Add support for beacon requests
net: mac802154: Handle beacons requests
net: mac802154: Add support for active scans
net: mac802154: Add support for processing beacon requests
net: mac802154: Inform device drivers about scans
net: mac802154: Inform device drivers about beacon operations
net: ieee802154: ca8210: Refuse most of the scan operations
drivers/net/ieee802154/adf7242.c | 3 +-
drivers/net/ieee802154/at86rf230.c | 34 +-
drivers/net/ieee802154/atusb.c | 34 +-
drivers/net/ieee802154/ca8210.c | 32 +-
drivers/net/ieee802154/cc2520.c | 3 +-
drivers/net/ieee802154/fakelb.c | 43 +-
drivers/net/ieee802154/mac802154_hwsim.c | 78 +++-
drivers/net/ieee802154/mcr20a.c | 8 +-
drivers/net/ieee802154/mrf24j40.c | 3 +-
include/linux/ieee802154.h | 7 +
include/net/cfg802154.h | 167 ++++++-
include/net/ieee802154_netdev.h | 85 ++++
include/net/mac802154.h | 40 ++
include/net/nl802154.h | 99 ++++
net/Kconfig | 3 +-
net/ieee802154/Kconfig | 1 +
net/ieee802154/Makefile | 2 +-
net/ieee802154/core.c | 2 +
net/ieee802154/core.h | 31 ++
net/ieee802154/header_ops.c | 67 +++
net/ieee802154/nl-phy.c | 8 +-
net/ieee802154/nl802154.c | 548 ++++++++++++++++++++++-
net/ieee802154/nl802154.h | 4 +
net/ieee802154/pan.c | 234 ++++++++++
net/ieee802154/rdev-ops.h | 52 +++
net/ieee802154/trace.h | 86 ++++
net/mac802154/Makefile | 2 +-
net/mac802154/cfg.c | 94 +++-
net/mac802154/driver-ops.h | 58 +++
net/mac802154/ieee802154_i.h | 52 +++
net/mac802154/main.c | 113 ++++-
net/mac802154/rx.c | 34 +-
net/mac802154/scan.c | 446 ++++++++++++++++++
net/mac802154/trace.h | 49 ++
net/mac802154/tx.c | 3 +
net/mac802154/util.c | 26 ++
36 files changed, 2438 insertions(+), 113 deletions(-)
create mode 100644 net/ieee802154/pan.c
create mode 100644 net/mac802154/scan.c
--
2.27.0
