Hello rtw88 and mac80211 maintainers/contributors,
there is an ongoing effort where Jernej and I are working on adding
SDIO support to the rtw88 driver [0].
The hardware we use at the moment is RTL8822BS and RTL8822CS.
We are at a point where scanning, assoc etc. works. Performance is
better in the latest version:
- RX throughput is between 20Mbit/s and 25Mbit/s on RTL8822CS
- TX throughput varies a lot, typically it's between 25Mbit/s and
50Mbit/s
This series contains some preparation work for adding SDIO support.
While testing our changes we found that there are some "scheduling
while atomic" errors in the kernel log. These are due to the fact
that the SDIO accessors (sdio_readb, sdio_writeb and friends) may
sleep internally.
Some background on why SDIO access (for example: sdio_writeb) cannot
be done with a spinlock held (this is a copy from my previous mail,
see [1]):
- when using for example sdio_writeb the MMC subsystem in Linux
prepares a so-called MMC request
- this request is submitted to the MMC host controller hardware
- the host controller hardware forwards the MMC request to the card
- the card signals when it's done processing the request
- the MMC subsystem in Linux waits for the card to signal that it's
done processing the request in mmc_wait_for_req_done() -> this uses
wait_for_completion() internally, which might sleep (which is not
allowed while a spinlock is held)
Based on Ping-Ke's suggestion I came up with the code in this series.
The goal is to use non-atomic locking for all register access in the
rtw88 driver. One patch adds a new function to mac80211 which did not
have a "non-atomic" version of it's "atomic" counterpart yet.
As mentioned before I don't have any rtw88 PCIe device so I am unable
to test on that hardware.
I am sending this as an RFC series since I am new to the mac80211
subsystem as well as the rtw88 driver. So any kind of feedback is
very welcome!
The actual changes for adding SDIO support will be sent separately in
the future.
Changes since v2 at [3]:
- patch #1: dropped "mac80211: Add stations iterator where the iterator
function may sleep" which was already applied to mac80211-next by
Johannes (thanks!)
- patch #2 (previously #3): move locking to the (only) caller of
rtw_ra_mask_info_update() to make the locking consistent with other
functions. Thank you Ping-Ke for this suggestion!
- cover-letter: update link to the current SDIO work-in-progress code
at [0]
Changes since v1 at [2] (which I sent back in summer):
- patch #1: fixed kernel doc copy & paste (remove _atomic) as suggested
by Ping-Ke and Johannes
- patch #1: added paragraph about driver authors having to be careful
where they use this new function as suggested by Johannes
- patch #2 (new): keep rtw_iterate_vifs_atomic() to not undo the fix
from commit 5b0efb4d670c8 ("rtw88: avoid circular locking between
local->iflist_mtx and rtwdev->mutex") and instead call
rtw_bf_cfg_csi_rate() from rtw_watch_dog_work() (outside the atomic
section) as suggested by Ping-Ke.
- patch #3 (new): keep rtw_iterate_vifs_atomic() to prevent deadlocks
as Johannes suggested. Keep track of all relevant stations inside
rtw_ra_mask_info_update_iter() and the iter-data and then call
rtw_update_sta_info() while held under rtwdev->mutex instead
- patch #7: shrink the critical section as suggested by Ping-Ke
[0] https://github.com/xdarklight/linux/tree/rtw88-test-20220107
[1] https://lore.kernel.org/linux-wireless/CAFBinCDMPPJ7qW7xTkep1Trg+zP0B9Jxei6sgjqmF4NDA1JAhQ@xxxxxxxxxxxxxx/
[2] https://lore.kernel.org/netdev/2170471a1c144adb882d06e08f3c9d1a@xxxxxxxxxxx/T/
[3] https://lore.kernel.org/netdev/20211228211501.468981-1-martin.blumenstingl@xxxxxxxxxxxxxx/
Martin Blumenstingl (8):
rtw88: Move rtw_chip_cfg_csi_rate() out of rtw_vif_watch_dog_iter()
rtw88: Move rtw_update_sta_info() out of
rtw_ra_mask_info_update_iter()
rtw88: Use rtw_iterate_vifs where the iterator reads or writes
registers
rtw88: Use rtw_iterate_stas where the iterator reads or writes
registers
rtw88: Replace usage of rtw_iterate_keys_rcu() with rtw_iterate_keys()
rtw88: Configure the registers from rtw_bf_assoc() outside the RCU
lock
rtw88: hci: Convert rf_lock from a spinlock to a mutex
rtw88: fw: Convert h2c.lock from a spinlock to a mutex
drivers/net/wireless/realtek/rtw88/bf.c | 13 ++---
drivers/net/wireless/realtek/rtw88/fw.c | 14 +++---
drivers/net/wireless/realtek/rtw88/hci.h | 11 ++---
drivers/net/wireless/realtek/rtw88/mac80211.c | 12 ++++-
drivers/net/wireless/realtek/rtw88/main.c | 47 +++++++++----------
drivers/net/wireless/realtek/rtw88/main.h | 4 +-
drivers/net/wireless/realtek/rtw88/phy.c | 4 +-
drivers/net/wireless/realtek/rtw88/ps.c | 2 +-
drivers/net/wireless/realtek/rtw88/util.h | 4 +-
drivers/net/wireless/realtek/rtw88/wow.c | 2 +-
10 files changed, 58 insertions(+), 55 deletions(-)
--
2.34.1
