Search Linux Wireless

Re: [PATCH 01/34] dt-bindings: net: bcm4329-fmac: Add Apple properties & chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 27, 2021 at 12:35:51AM +0900, Hector Martin wrote:
> This binding is currently used for SDIO devices, but these chips are
> also used as PCIe devices on DT platforms and may be represented in the
> DT. Re-use the existing binding and add chip compatibles used by Apple
> T2 and M1 platforms (the T2 ones are not known to be used in DT
> platforms, but we might as well document them).
> 
> Then, add properties required for firmware selection and calibration on
> M1 machines.
> 
> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
> ---
>  .../net/wireless/brcm,bcm4329-fmac.yaml       | 32 +++++++++++++++++--
>  1 file changed, 29 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> index c11f23b20c4c..2530ff3e7b90 100644
> --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> @@ -4,7 +4,7 @@
>  $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Broadcom BCM4329 family fullmac wireless SDIO devices
> +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
>  
>  maintainers:
>    - Arend van Spriel <arend@xxxxxxxxxxxx>
> @@ -36,16 +36,22 @@ properties:
>                - brcm,bcm43455-fmac
>                - brcm,bcm43456-fmac
>                - brcm,bcm4354-fmac
> +              - brcm,bcm4355c1-fmac
>                - brcm,bcm4356-fmac
>                - brcm,bcm4359-fmac
> +              - brcm,bcm4364b2-fmac
> +              - brcm,bcm4364b3-fmac
> +              - brcm,bcm4377b3-fmac
> +              - brcm,bcm4378b1-fmac
> +              - brcm,bcm4387c2-fmac
>                - cypress,cyw4373-fmac
>                - cypress,cyw43012-fmac
>            - const: brcm,bcm4329-fmac
>        - const: brcm,bcm4329-fmac
>  
>    reg:
> -    description: SDIO function number for the device, for most cases
> -      this will be 1.
> +    description: SDIO function number for the device (for most cases
> +      this will be 1) or PCI device identifier.
>  
>    interrupts:
>      maxItems: 1
> @@ -75,6 +81,26 @@ properties:
>      items:
>        pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
>  
> +  brcm,cal-blob:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    description: A per-device calibration blob for the Wi-Fi radio. This
> +      should be filled in by the bootloader from platform configuration
> +      data, if necessary, and will be uploaded to the device if present.
> +
> +  apple,module-instance:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: Module codename used to identify a specific board on
> +      Apple platforms. This is used to build the firmware filenames, to allow
> +      different platforms to have different firmware and/or NVRAM config.
> +
> +  apple,antenna-sku:
> +    $def: /schemas/types.yaml#/definitions/string
> +    description: Antenna SKU used to identify a specific antenna configuration
> +      on Apple platforms. This is use to build firmware filenames, to allow
> +      platforms with different antenna configs to have different firmware and/or
> +      NVRAM. This would normally be filled in by the bootloader from platform
> +      configuration data.

Is there a known set of strings that can be defined?

There's also the somewhat standard 'firmware-name' property that serves 
similar purpose, but if there's multiple files, then I guess this 
approach is fine.

Rob



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux