> > --- a/drivers/net/wireless/ath/ath10k/core.c
> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > @@ -75,6 +75,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .board_size = QCA988X_BOARD_DATA_SZ,
> > .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
> > },
> > + .rx_desc_ops = &qca988x_rx_desc_ops,
> > .hw_ops = &qca988x_ops,
> Any particular reason why you didn't use the existing hw_ops?
I didn't use the hw_ops, because while the preWCN3990 cards have
different hw_ops implementations,
they all share the same rx_desc (i tried having a dedicated rx_desc
for each card, but this made the firmware seldom crash,
while the current memory layout seems to be the most stable) so having
a separate rx_desc_ops requires the least number of changes.
> This looks, but I did some changes in the pending branch. Please check
> my changes:
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=c9a516b946c4b3ce25d422890ca78d0ca730b065
> Below are my comments.
Woops, I apologise for the typos and extra whitespaces, I thought I
had gotten rid of them all.
Anyways, everything looks good to me.
I was a bit worried about performance regression due to the
introduction of getters and setters
for accessing the rx descriptor, but so far it seems to consistently
work fine. I cannot test on the WCN3990 unfortunately,
where we also pay for the further indirection due to function pointers.
Il giorno mer 22 dic 2021 alle ore 08:54 Kalle Valo <kvalo@xxxxxxxxxx>
ha scritto:
>
> Francesco Magliocca <franciman12@xxxxxxxxx> writes:
>
> > QCA6174 card often hangs with the current htt_rx_desc
> > memory layout in some circumstances, because its firmware
> > fails to handle length differences.
> > Therefore we must abstract the htt_rx_desc structure
> > and operations on it, to allow different wireless cards
> > to use different, unrelated rx descriptor structures.
> >
> > Define a base htt_rx_desc structure and htt_rx_desc_qca_old
> > for use with the QCA family of ath10k supported cards
> > and htt_rx_desc_new for use with the WCN3990 card.
> >
> > Define htt_rx_desc_ops which contains the abstract operations
> > to access the generic htt_rx_desc, give implementations
> > for each card and update htt_rx.c to use the defined
> > abstract interface to rx descriptors.
> >
> > Fixes: e3def6f7ddf8 ("ath10k: Update rx descriptor for WCN3990 target")
> >
> > Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
> >
> > Co-developed-by: Enrico Lumetti <enrico@xxxxxxxxxx>
> > Signed-off-by: Enrico Lumetti <enrico@xxxxxxxxxx>
> > Signed-off-by: Francesco Magliocca <franciman12@xxxxxxxxx>
> > Link: https://lore.kernel.org/ath10k/CAH4F6usFu8-A6k5Z7rU9__iENcSC6Zr-NtRhh_aypR74UvN1uQ@xxxxxxxxxxxxxx/
>
> This looks, but I did some changes in the pending branch. Please check
> my changes:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=c9a516b946c4b3ce25d422890ca78d0ca730b065
>
> Below are my comments.
>
> drivers/net/wireless/ath/ath10k/htt.c:141: line length of 98 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt.c:149: line length of 98 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:374: line length of 91 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1098: line length of 98 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1234: line length of 98 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1261: line length of 93 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1417: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1553: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1600: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1654: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1710: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1753: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1788: line length of 91 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1814: line length of 91 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1930: line length of 93 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:1962: line length of 92 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:2172: line length of 93 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:2211: line length of 93 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:3139: line length of 100 exceeds 90 columns
> drivers/net/wireless/ath/ath10k/htt_rx.c:3148: line length of 92 exceeds 90 columns
>
> ath10k-check warned about long lines, so I fixed those.
>
> > --- a/drivers/net/wireless/ath/ath10k/core.c
> > +++ b/drivers/net/wireless/ath/ath10k/core.c
> > @@ -75,6 +75,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
> > .board_size = QCA988X_BOARD_DATA_SZ,
> > .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
> > },
> > + .rx_desc_ops = &qca988x_rx_desc_ops,
> > .hw_ops = &qca988x_ops,
>
> Any particular reason why you didn't use the existing hw_ops?
>
> > +static void ath10k_rx_desc_wcn3990_get_offsets(struct htt_rx_ring_rx_desc_offsets *off)
> > +{
> > +#define desc_offset(x) (offsetof(struct htt_rx_desc_new, x) / 4)
> > + off->mac80211_hdr_offset = __cpu_to_le16(desc_offset(rx_hdr_status));
> > + off->msdu_payload_offset = __cpu_to_le16(desc_offset(msdu_payload));
> > + off->ppdu_start_offset = __cpu_to_le16(desc_offset(ppdu_start));
> > + off->ppdu_end_offset = __cpu_to_le16(desc_offset(ppdu_end));
> > + off->mpdu_start_offset = __cpu_to_le16(desc_offset(mpdu_start));
> > + off->mpdu_end_offset = __cpu_to_le16(desc_offset(mpdu_end));
> > + off->msdu_start_offset = __cpu_to_le16(desc_offset(msdu_start));
> > + off->msdu_end_offset = __cpu_to_le16(desc_offset(msdu_end));
> > + off->rx_attention_offset = __cpu_to_le16(desc_offset(attention));
> > + off->frag_info_offset = __cpu_to_le16(desc_offset(frag_info));
> > +#undef desc_metadata_offset
> > +#undef metadata_offset
>
> I couldn't find these two defined anywhere so removed the undefs.
>
> > +/* rx descriptor for wcn3990 and possibly extensible for newer cards
> > + * Buffers like this are placed on the rx ring.
> > + */
> > +struct htt_rx_desc_new {
> > + struct htt_rx_desc base;
> > struct {
> > struct rx_attention attention;
> > struct rx_frag_info frag_info;
> > @@ -2210,6 +2221,240 @@ struct htt_rx_desc {
> > u8 msdu_payload[];
> > };
>
> Using old and new is not a good idea when versioning something because
> when a third one is added the naming will be hard. So I renamed old to
> v1 and new to v2 everywhere in the patch.
>
> > +extern const struct ath10k_htt_rx_desc_ops qca988x_rx_desc_ops;
> > +extern const struct ath10k_htt_rx_desc_ops qca99x0_rx_desc_ops;
> > +extern const struct ath10k_htt_rx_desc_ops wcn3990_rx_desc_ops;
>
> These should be use "ath10k_" prefix, but forgot to change that. Will do
> it later.
>
> > +static inline struct rx_msdu_end_common *
> > +ath10k_htt_rx_desc_get_msdu_end(struct ath10k_hw_params *hw, struct htt_rx_desc *rxd)
>
> Are there extra space before '*'? Need to check that.
>
> > +static inline struct rx_ppdu_end_common *
> > +ath10k_htt_rx_desc_get_ppdu_end(struct ath10k_hw_params *hw, struct htt_rx_desc *rxd)
>
> Extra spaces?
>
> > static struct ieee80211_channel *
> > ath10k_htt_rx_h_peer_channel(struct ath10k *ar, struct htt_rx_desc *rxd)
> > {
> > + struct ath10k_hw_params *hw = &ar->hw_params;
> > + struct rx_attention *rxd_attention = ath10k_htt_rx_desc_get_attention(hw, rxd);
> > + struct rx_msdu_end_common *rxd_msdu_end_common = ath10k_htt_rx_desc_get_msdu_end(hw, rxd);
> > + struct rx_mpdu_start *rxd_mpdu_start = ath10k_htt_rx_desc_get_mpdu_start(hw, rxd);
> > struct ath10k_peer *peer;
> > struct ath10k_vif *arvif;
> > struct cfg80211_chan_def def;
> > @@ -1069,15 +1107,15 @@ ath10k_htt_rx_h_peer_channel(struct ath10k *ar, struct htt_rx_desc *rxd)
> > if (!rxd)
> > return NULL;
>
> Here I moved the variable initialisation after the rxd null check to
> avoid null pointer issues and also reduce long lines.
>
> --
> https://patchwork.kernel.org/project/linux-wireless/list/
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
