Wen Gong <quic_wgong@xxxxxxxxxxx> wrote: > IEEE80211_HW_USES_RSS is set in ath11k, then the device uses RSS and > thus requires parallel RX which implies using per-CPU station statistics > in sta_get_last_rx_stats() of mac80211. Currently signal is only set in > ath11k_mgmt_rx_event(), and not set for RX data packet, then it show > signal as 0 for iw command easily. > > Change to get signal from firmware and report to mac80211. > > For QCA6390 and WCN6855, the rssi value is already in dbm unit, so > don't need to convert it again. > > Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 > Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 > > Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx> > Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx> Patch applied to ath-next branch of ath.git, thanks. c3b39553fc77 ath11k: add signal report to mac80211 for QCA6390 and WCN6855 -- https://patchwork.kernel.org/project/linux-wireless/patch/20211216070535.31732-1-quic_wgong@xxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
