> -----Original Message-----
> From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> Sent: Tuesday, December 14, 2021 10:49 AM
> To: tony0620emma@xxxxxxxxx; Pkshih <pkshih@xxxxxxxxxxx>
> Cc: jian-hong@xxxxxxxxxxxx; Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>; Kalle Valo
> <kvalo@xxxxxxxxxxxxxx>; David S. Miller <davem@xxxxxxxxxxxxx>; Jakub Kicinski <kuba@xxxxxxxxxx>; Brian
> Norris <briannorris@xxxxxxxxxxxx>; Bernie Huang <phhuang@xxxxxxxxxxx>; linux-wireless@xxxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH] rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE
>
> Many Intel based platforms face system random freeze after commit
> 9e2fd29864c5 ("rtw88: add napi support").
>
> The commit itself shouldn't be the culprit. My guess is that the 8821CE
> only leaves ASPM L1 for a short period when IRQ is raised. Since IRQ is
> masked during NAPI polling, the PCIe link stays at L1 and makes RX DMA
> extremely slow. Eventually the RX ring becomes messed up:
> [ 1133.194697] rtw_8821ce 0000:02:00.0: pci bus timeout, check dma status
>
> Since the 8821CE hardware may fail to leave ASPM L1, manually do it in
> the driver to resolve the issue.
>
> Fixes: 9e2fd29864c5 ("rtw88: add napi support")
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215131
> BugLink: https://bugs.launchpad.net/bugs/1927808
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
> drivers/net/wireless/realtek/rtw88/pci.c | 74 ++++++++----------------
> drivers/net/wireless/realtek/rtw88/pci.h | 1 +
> 2 files changed, 24 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
> index 3b367c9085eba..f09eb5e2437a9 100644
> --- a/drivers/net/wireless/realtek/rtw88/pci.c
> +++ b/drivers/net/wireless/realtek/rtw88/pci.c
> @@ -2,7 +2,6 @@
> /* Copyright(c) 2018-2019 Realtek Corporation
> */
>
> -#include <linux/dmi.h>
> #include <linux/module.h>
> #include <linux/pci.h>
> #include "main.h"
> @@ -16,10 +15,13 @@
>
> static bool rtw_disable_msi;
> static bool rtw_pci_disable_aspm;
> +static int rtw_rx_aspm;
With your parameter description, rtw_rx_aspm = -1 by default.
> module_param_named(disable_msi, rtw_disable_msi, bool, 0644);
> module_param_named(disable_aspm, rtw_pci_disable_aspm, bool, 0644);
> +module_param_named(rx_aspm, rtw_rx_aspm, int, 0444);
> MODULE_PARM_DESC(disable_msi, "Set Y to disable MSI interrupt support");
> MODULE_PARM_DESC(disable_aspm, "Set Y to disable PCI ASPM support");
> +MODULE_PARM_DESC(rx_aspm, "Use PCIe ASPM for RX (0=disable, 1=enable, -1=default)");
[...]
--
Ping-Ke
