From: Arnd Bergmann <arnd@xxxxxxxx>
This is now the only driver that selects the LEDS_CLASS framework,
which is normally user-selectable. While it doesn't strictly cause
a bug, rework the Kconfig logic to be more consistent with what
other drivers do, and only enable LED support in brcmsmac if the
dependencies are all there, rather than using 'select' to enable
what it needs.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/Kconfig | 14 +++++++++-----
.../wireless/broadcom/brcm80211/brcmsmac/Makefile | 2 +-
.../net/wireless/broadcom/brcm80211/brcmsmac/led.h | 2 +-
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 5bf2318763c5..3a1a35b5672f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -7,16 +7,20 @@ config BRCMSMAC
depends on MAC80211
depends on BCMA_POSSIBLE
select BCMA
- select NEW_LEDS if BCMA_DRIVER_GPIO
- select LEDS_CLASS if BCMA_DRIVER_GPIO
select BRCMUTIL
select FW_LOADER
select CORDIC
help
This module adds support for PCIe wireless adapters based on Broadcom
- IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
- be available if you select BCMA_DRIVER_GPIO. If you choose to build a
- module, the driver will be called brcmsmac.ko.
+ IEEE802.11n SoftMAC chipsets. If you choose to build a module, the
+ driver will be called brcmsmac.ko.
+
+config BRCMSMAC_LEDS
+ def_bool BRCMSMAC && BCMA_DRIVER_GPIO && MAC80211_LEDS
+ help
+ The brcmsmac LED support depends on the presence of the
+ BCMA_DRIVER_GPIO driver, and it only works if LED support
+ is enabled and reachable from the driver module.
source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
index 482d7737764d..090757730ba6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
@@ -42,6 +42,6 @@ brcmsmac-y := \
brcms_trace_events.o \
debug.o
-brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
+brcmsmac-$(CONFIG_BRCMSMAC_LEDS) += led.o
obj-$(CONFIG_BRCMSMAC) += brcmsmac.o
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
index d65f5c268fd7..2a5cbeb9e783 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
@@ -24,7 +24,7 @@ struct brcms_led {
struct gpio_desc *gpiod;
};
-#ifdef CONFIG_BCMA_DRIVER_GPIO
+#ifdef CONFIG_BRCMSMAC_LEDS
void brcms_led_unregister(struct brcms_info *wl);
int brcms_led_register(struct brcms_info *wl);
#else
--
2.29.2
