From: Johannes Berg <johannes.berg@xxxxxxxxx> On Bz devices, UREG_DOORBELL_TO_ISR6_NMI_BIT no longer actually triggers an NMI. So instead of setting BIT(0) | BIT(1) for the reset flow, we need to just set BIT(1) and then force the NMI in the new way. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx> --- drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c index 72b5b69bfe5e..0febdcacbd42 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c @@ -105,9 +105,12 @@ static void iwl_trans_pcie_fw_reset_handshake(struct iwl_trans *trans) if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210) iwl_write_umac_prph(trans, UREG_NIC_SET_NMI_DRIVER, UREG_NIC_SET_NMI_DRIVER_RESET_HANDSHAKE); - else + else if (trans->trans_cfg->device_family == IWL_DEVICE_FAMILY_AX210) iwl_write_umac_prph(trans, UREG_DOORBELL_TO_ISR6, UREG_DOORBELL_TO_ISR6_RESET_HANDSHAKE); + else + iwl_write32(trans, CSR_DOORBELL_VECTOR, + UREG_DOORBELL_TO_ISR6_RESET_HANDSHAKE); /* wait 200ms */ ret = wait_event_timeout(trans_pcie->fw_reset_waitq, -- 2.33.1
