These parameters shouldn't be configurable via debugfs, if they
need to be configurable nl80211 support has to be added, if not
then they don't need to be writable here either.
Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Cc: Javier Cardona <javier@xxxxxxxxxxx>
Cc: Luis Carlos Cobo <luisca@xxxxxxxxxxx>
---
net/mac80211/debugfs_netdev.c | 112 +++++++++---------------------------------
1 file changed, 24 insertions(+), 88 deletions(-)
--- everything.orig/net/mac80211/debugfs_netdev.c 2008-10-07 11:26:52.000000000 +0200
+++ everything/net/mac80211/debugfs_netdev.c 2008-10-07 11:27:00.000000000 +0200
@@ -41,29 +41,6 @@ static ssize_t ieee80211_if_read(
return ret;
}
-#ifdef CONFIG_MAC80211_MESH
-static ssize_t ieee80211_if_write(
- struct ieee80211_sub_if_data *sdata,
- char const __user *userbuf,
- size_t count, loff_t *ppos,
- int (*format)(struct ieee80211_sub_if_data *, char *))
-{
- char buf[10];
- int buf_size;
-
- memset(buf, 0x00, sizeof(buf));
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, userbuf, buf_size))
- return count;
- read_lock(&dev_base_lock);
- if (sdata->dev->reg_state == NETREG_REGISTERED)
- (*format)(sdata, buf);
- read_unlock(&dev_base_lock);
-
- return count;
-}
-#endif
-
#define IEEE80211_IF_FMT(name, field, format_string) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
@@ -71,19 +48,6 @@ static ssize_t ieee80211_if_fmt_##name(
{ \
return scnprintf(buf, buflen, format_string, sdata->field); \
}
-#define IEEE80211_IF_WFMT(name, field, type) \
-static int ieee80211_if_wfmt_##name( \
- struct ieee80211_sub_if_data *sdata, char *buf) \
-{ \
- unsigned long tmp; \
- char *endp; \
- \
- tmp = simple_strtoul(buf, &endp, 0); \
- if ((endp == buf) || ((type)tmp != tmp)) \
- return -EINVAL; \
- sdata->field = tmp; \
- return 0; \
-}
#define IEEE80211_IF_FMT_DEC(name, field) \
IEEE80211_IF_FMT(name, field, "%d\n")
#define IEEE80211_IF_FMT_HEX(name, field) \
@@ -126,34 +90,6 @@ static const struct file_operations name
IEEE80211_IF_FMT_##format(name, field) \
__IEEE80211_IF_FILE(name)
-#define __IEEE80211_IF_WFILE(name) \
-static ssize_t ieee80211_if_read_##name(struct file *file, \
- char __user *userbuf, \
- size_t count, loff_t *ppos) \
-{ \
- return ieee80211_if_read(file->private_data, \
- userbuf, count, ppos, \
- ieee80211_if_fmt_##name); \
-} \
-static ssize_t ieee80211_if_write_##name(struct file *file, \
- const char __user *userbuf, \
- size_t count, loff_t *ppos) \
-{ \
- return ieee80211_if_write(file->private_data, \
- userbuf, count, ppos, \
- ieee80211_if_wfmt_##name); \
-} \
-static const struct file_operations name##_ops = { \
- .read = ieee80211_if_read_##name, \
- .write = ieee80211_if_write_##name, \
- .open = mac80211_open_file_generic, \
-}
-
-#define IEEE80211_IF_WFILE(name, field, format, type) \
- IEEE80211_IF_FMT_##format(name, field) \
- IEEE80211_IF_WFMT(name, field, type) \
- __IEEE80211_IF_WFILE(name)
-
/* common attributes */
IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
IEEE80211_IF_FILE(force_unicast_rateidx, force_unicast_rateidx, DEC);
@@ -212,30 +148,30 @@ IEEE80211_IF_FILE(dropped_frames_no_rout
IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC);
/* Mesh parameters */
-IEEE80211_IF_WFILE(dot11MeshMaxRetries,
- u.mesh.mshcfg.dot11MeshMaxRetries, DEC, u8);
-IEEE80211_IF_WFILE(dot11MeshRetryTimeout,
- u.mesh.mshcfg.dot11MeshRetryTimeout, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshConfirmTimeout,
- u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshHoldingTimeout,
- u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC, u8);
-IEEE80211_IF_WFILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC, u8);
-IEEE80211_IF_WFILE(dot11MeshMaxPeerLinks,
- u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshHWMPactivePathTimeout,
- u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC, u32);
-IEEE80211_IF_WFILE(dot11MeshHWMPpreqMinInterval,
- u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshHWMPnetDiameterTraversalTime,
- u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC, u16);
-IEEE80211_IF_WFILE(dot11MeshHWMPmaxPREQretries,
- u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC, u8);
-IEEE80211_IF_WFILE(path_refresh_time,
- u.mesh.mshcfg.path_refresh_time, DEC, u32);
-IEEE80211_IF_WFILE(min_discovery_timeout,
- u.mesh.mshcfg.min_discovery_timeout, DEC, u16);
+IEEE80211_IF_FILE(dot11MeshMaxRetries,
+ u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
+IEEE80211_IF_FILE(dot11MeshRetryTimeout,
+ u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
+IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
+ u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
+IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
+ u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
+IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
+IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
+IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
+ u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
+ u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
+ u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
+ u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
+ u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
+IEEE80211_IF_FILE(path_refresh_time,
+ u.mesh.mshcfg.path_refresh_time, DEC);
+IEEE80211_IF_FILE(min_discovery_timeout,
+ u.mesh.mshcfg.min_discovery_timeout, DEC);
#endif
--
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
