In mac80211, while building radiotap header IEEE80211_RADIOTAP_MCS_HAVE_FEC flag is missing when LDPC enabled from driver, hence LDPC is not updated properly in radiotap header. Fix that by adding HAVE_FEC flag while building radiotap header. Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx> --- net/mac80211/rx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 9541a4c..be12fa8 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -465,7 +465,12 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, unsigned int stbc; rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS)); - *pos++ = local->hw.radiotap_mcs_details; + *pos = local->hw.radiotap_mcs_details; + if (status->enc_flags & RX_ENC_FLAG_HT_GF) + *pos |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; + if (status->enc_flags & RX_ENC_FLAG_LDPC) + *pos |= IEEE80211_RADIOTAP_MCS_HAVE_FEC; + pos++; *pos = 0; if (status->enc_flags & RX_ENC_FLAG_SHORT_GI) *pos |= IEEE80211_RADIOTAP_MCS_SGI; -- 2.7.4
