Currently there are about 60 channels for 6 GHz, then the size of
chan_list in struct scan_req_params which is 40 is not enough to
fill all the channel list of 6 GHz.
Use dynamic memory to save the channel list of scan.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 10 ++++++++++
drivers/net/wireless/ath/ath11k/wmi.h | 3 +--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 06d20658586a..bad2f720a444 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3500,6 +3500,14 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
if (req->n_channels) {
arg.num_chan = req->n_channels;
+ arg.chan_list = kcalloc(arg.num_chan, sizeof(*arg.chan_list),
+ GFP_KERNEL);
+
+ if (!arg.chan_list) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
for (i = 0; i < arg.num_chan; i++)
arg.chan_list[i] = req->channels[i]->center_freq;
}
@@ -3518,6 +3526,8 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
ATH11K_MAC_SCAN_TIMEOUT_MSECS));
exit:
+ kfree(arg.chan_list);
+
if (req->ie_len)
kfree(arg.extraie.ptr);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 8e8bac1b7370..35f5432357f5 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3082,7 +3082,6 @@ enum scan_dwelltime_adaptive_mode {
#define WLAN_SCAN_MAX_NUM_SSID 10
#define WLAN_SCAN_MAX_NUM_BSSID 10
-#define WLAN_SCAN_MAX_NUM_CHANNELS 40
#define WLAN_SSID_MAX_LEN 32
@@ -3303,7 +3302,7 @@ struct scan_req_params {
u32 num_bssid;
u32 num_ssids;
u32 n_probes;
- u32 chan_list[WLAN_SCAN_MAX_NUM_CHANNELS];
+ u32 *chan_list;
u32 notify_scan_events;
struct wlan_ssid ssid[WLAN_SCAN_MAX_NUM_SSID];
struct wmi_mac_addr bssid_list[WLAN_SCAN_MAX_NUM_BSSID];
--
2.31.1
