Search Linux Wireless

Re: [PATCH] ath9k: switch to rate table based lookup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jonas Jelonek <jelonek.jonas@xxxxxxxxx> writes:

>> And how did you test this? Are both PCI and USB devices affected?
>
> I tested this on a 8devices Rambutan with QCA9558 SoC, but didn‘t
> explicitly test this with a USB device. I am not sure whether the
> ath9k_htc is affected. First I tested this without the patch to get a
> reference for comparison. I connected three devices via WiFi 2.4GHz
> and 5GHz, generated traffic multiple times with iperf3 and captured
> the rc_stats for each station. Then I applied the patch and did the
> same again. The throughput was overall the same like without the
> patch, compared to the first run of each station. Rate selection
> worked fine, the stats were nearly identical, same rates selected in
> both runs.

Thanks. Can someone review this from ath9k_htc point of view?

Also please don't use HTML in your emails, our lists drop all HTML
mails.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux