Typically all AP interfaces on a PHY will share the same WMM settings, while sta/mesh interfaces will usually inherit the settings from a remote device. In order minimize the likelihood of conflicting WMM settings, make all AP interfaces share one slot, and all non-AP interfaces another one. Signed-off-by: Felix Fietkau <nbd@xxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt7915/main.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c index 057ab27b7083..8c1fa08b6286 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c @@ -218,11 +218,9 @@ static int mt7915_add_interface(struct ieee80211_hw *hw, mvif->phy = phy; mvif->band_idx = ext_phy; - if (dev->mt76.phy2) - mvif->wmm_idx = ext_phy * (MT7915_MAX_WMM_SETS / 2) + - mvif->idx % (MT7915_MAX_WMM_SETS / 2); - else - mvif->wmm_idx = mvif->idx % MT7915_MAX_WMM_SETS; + mvif->wmm_idx = vif->type != NL80211_IFTYPE_AP; + if (ext_phy) + mvif->wmm_idx += 2; ret = mt7915_mcu_add_dev_info(phy, vif, true); if (ret) -- 2.30.1
