Search Linux Wireless

Re: [PATCH v2 2/2] ath11k: Use reserved host DDR addresses from DT for PCI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Anilkumar Kolli <akolli@xxxxxxxxxxxxxx> writes:

> Host DDR memory (contiguous 45 MB in mode-0 or 15 MB in mode-2)
> is reserved through DT entries for firmware usage. Send the base
> address and size from DT entries.
>
> If DT entry is available, PCI devices work with
> fixed_mem_region else host allocates multiple segments.
>
> IPQ8074 on HK10 board supports multiple PCI devices.
> IPQ8074 + QCN9074 is tested with this patch.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
> ---
> V2:
>   - Use of_ API to read from dt node (Rob)
>
>  drivers/net/wireless/ath/ath11k/mhi.c | 42 ++++++++++++++++++--
>  drivers/net/wireless/ath/ath11k/pci.c | 10 ++++-
>  drivers/net/wireless/ath/ath11k/qmi.c | 75 +++++++++++++++++++++++++++++++----
>  drivers/net/wireless/ath/ath11k/qmi.h |  1 +
>  4 files changed, 116 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
> index 26c7ae242db6..0ea6ab7edeb9 100644
> --- a/drivers/net/wireless/ath/ath11k/mhi.c
> +++ b/drivers/net/wireless/ath/ath11k/mhi.c
> @@ -3,6 +3,7 @@
>  
>  #include <linux/msi.h>
>  #include <linux/pci.h>
> +#include <linux/of.h>
>  
>  #include "core.h"
>  #include "debug.h"
> @@ -316,7 +317,11 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
>  	struct ath11k_base *ab = ab_pci->ab;
>  	struct mhi_controller *mhi_ctrl;
>  	struct mhi_controller_config *ath11k_mhi_config;
> -	int ret;
> +	struct device_node *np;
> +	int ret, len, sw, aw;
> +	u32 *reg, *reg_end;
> +	unsigned long start, size;
> +	bool no_dt_entry = 0;

Use only true or false with bools.

>  	mhi_ctrl = mhi_alloc_controller();
>  	if (!mhi_ctrl)
> @@ -339,8 +344,39 @@ int ath11k_mhi_register(struct ath11k_pci *ab_pci)
>  		return ret;
>  	}
>  
> -	mhi_ctrl->iova_start = 0;
> -	mhi_ctrl->iova_stop = 0xffffffff;
> +	np = of_find_node_by_type(NULL, "memory");
> +	if (!np) {
> +		no_dt_entry = 1;

true

> +		goto no_dt_entry;
> +	}
> +
> +	aw = of_n_addr_cells(np);
> +	sw = of_n_size_cells(np);
> +
> +	reg = (unsigned int *)of_get_property(np, "reg", &len);

Always try to avoid casts. of_get_property() returns 'const void *' so
you are casting out const here, which is a bug. You don't need to do
casting with void pointers so remove it here.

But is reg property really unsigned int? And not u32 or dma_addr_t, for
example?

> +	if (!reg) {
> +		no_dt_entry = 1;

true

> +		goto no_dt_entry;
> +	}
> +
> +	reg_end = reg + len / (aw * sw);
> +
> +	do {
> +		start = of_read_number(reg, aw);
> +		reg += aw;
> +		size = of_read_number(reg, sw);

of_read_number() takes 'const __be32 *cell' but reg is 'u32 *'?

> +		reg += sw;
> +	} while (reg < reg_end);
> +
> +no_dt_entry:
> +	if (no_dt_entry) {
> +		mhi_ctrl->iova_start = 0;
> +		mhi_ctrl->iova_stop = 0xFFFFFFFF;
> +	} else {
> +		mhi_ctrl->iova_start = (dma_addr_t)(start + 0x1000000);
> +		mhi_ctrl->iova_stop = (dma_addr_t)(start + size);

I don't like casts, they hide bugs like the const issue above. Is there
any way to do this without casts?

> @@ -1245,6 +1246,13 @@ static int ath11k_pci_probe(struct pci_dev *pdev,
>  	pci_set_drvdata(pdev, ab);
>  	spin_lock_init(&ab_pci->window_lock);
>  
> +	/* Set fixed_mem_region to true for platforms support reserved memory
> +	 * from DT. If memory is reserved from DT for FW, ath11k driver need not
> +	 * allocate memory.
> +	 */
> +	if (!of_property_read_u32(ab->dev->of_node, "memory-region", &addr))
> +		ab->bus_params.fixed_mem_region = true;

ab->bus_params is supposed to be const to catch this, but clearly it's
not. The idea of bus_params is to have static bus level configuration,
please instead use dev_flags or something else.

>  static int ath11k_qmi_assign_target_mem_chunk(struct ath11k_base *ab)
>  {
> -	int i, idx;
> +	struct device *dev = ab->dev;
> +	struct device_node *hremote_node = NULL;
> +	phandle hremote_phandle;
> +	int i, idx, len, sw, aw, host_ddr_sz;
> +	u32 *reg, *reg_end;
> +	u64 start, size;
>  
>  	for (i = 0, idx = 0; i < ab->qmi.mem_seg_count; i++) {
>  		switch (ab->qmi.target_mem[i].type) {
> +		case HOST_DDR_REGION_TYPE:
> +			if (of_property_read_u32(dev->of_node, "memory-region",
> +						 &hremote_phandle)) {
> +				ath11k_dbg(ab, ATH11K_DBG_QMI,
> +					   "qmi fail to get hremote phandle\n");
> +				return 0;
> +			}
> +
> +			hremote_node = of_find_node_by_phandle(hremote_phandle);
> +			if (!hremote_node) {
> +				ath11k_dbg(ab, ATH11K_DBG_QMI,
> +					   "qmi fail to get hremote_node\n");
> +				return 0;
> +			}
> +
> +			aw = of_n_addr_cells(hremote_node);
> +			sw = of_n_size_cells(hremote_node);
> +
> +			reg = (unsigned int *)of_get_property(hremote_node, "reg", &len);

No need to cast. And I guess you are again removing the const?

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux